2.5.39 with contest 0.41
From: Con Kolivas <[email protected]>
[...]
Quoted 36 lines
Quoted 25 lines
process_load:Kernel Time CPU Ratio 2.4.19 200.43 60% 1.51 2.4.19 203.11 60% 1.53 2.4.19 203.97 59% 1.53 2.5.38-mm2 194.42 69% 1.46 2.5.38-mm2 195.19 69% 1.47 2.5.38-mm2 207.36 64% 1.56 2.5.39 190.44 70% 1.43 2.5.39 191.37 70% 1.44 2.5.39 193.60 69% 1.45
io_load:Kernel Time CPU Ratio 2.4.19 486.58 27% 3.66 2.4.19 593.72 22% 4.46 2.4.19 637.61 21% 4.79 2.5.38-mm2 232.35 61% 1.75 2.5.38-mm2 237.83 57% 1.79 2.5.38-mm2 274.39 50% 2.06 2.5.39 242.98 57% 1.83 2.5.39 294.52 50% 2.21 2.5.39 328.01 42% 2.46
mem_load:Quoted 10 lines
Kernel Time CPU Ratio 2.4.19 172.24 78% 1.29 2.4.19 174.74 77% 1.31 2.4.19 174.87 77% 1.31 2.5.38-mm2 165.53 82% 1.24 2.5.38-mm2 170.00 80% 1.28 2.5.38-mm2 171.96 79% 1.29 2.5.39 167.92 81% 1.26 2.5.39 170.80 80% 1.28 2.5.39 172.68 79% 1.30
Quoted 4 lines
Quick statistical analysis:
Noload, 2.5.39 is slower than 2.4.19 and same as 2.5.38-mm2ProcessLoad, 2.5.39 is slower than 2.4.19 and same as 2.5.38-mm2
Why ?
If look at the numbers I assume that 2.5.39 is faster then 2.4.19. Am I missing something?
I'll run further test...
Ciao,
Paolo
Signature · 4 lines
Get your free email from www.linuxmail.org Powered by Outblaze
Quoting Paolo Ciarrocchi <[email protected]>:
Quoted 38 lines
From: Con Kolivas <[email protected]>
[...]Quoted 36 lines
Quoted 35 lines
process_load:Kernel Time CPU Ratio 2.4.19 200.43 60% 1.51 2.4.19 203.11 60% 1.53 2.4.19 203.97 59% 1.53 2.5.38-mm2 194.42 69% 1.46 2.5.38-mm2 195.19 69% 1.47 2.5.38-mm2 207.36 64% 1.56 2.5.39 190.44 70% 1.43 2.5.39 191.37 70% 1.44 2.5.39 193.60 69% 1.45
io_load:Kernel Time CPU Ratio 2.4.19 486.58 27% 3.66 2.4.19 593.72 22% 4.46 2.4.19 637.61 21% 4.79 2.5.38-mm2 232.35 61% 1.75 2.5.38-mm2 237.83 57% 1.79 2.5.38-mm2 274.39 50% 2.06 2.5.39 242.98 57% 1.83 2.5.39 294.52 50% 2.21 2.5.39 328.01 42% 2.46
mem_load:Kernel Time CPU Ratio 2.4.19 172.24 78% 1.29 2.4.19 174.74 77% 1.31 2.4.19 174.87 77% 1.31 2.5.38-mm2 165.53 82% 1.24 2.5.38-mm2 170.00 80% 1.28 2.5.38-mm2 171.96 79% 1.29 2.5.39 167.92 81% 1.26 2.5.39 170.80 80% 1.28 2.5.39 172.68 79% 1.30
Quoted 7 lines
Quoted 4 lines
Quick statistical analysis:
Noload, 2.5.39 is slower than 2.4.19 and same as 2.5.38-mm2ProcessLoad, 2.5.39 is slower than 2.4.19 and same as 2.5.38-mm2
Why ?
If look at the numbers I assume that 2.5.39 is faster then 2.4.19. Am I missing something?
Sorry, typo should read 2.5.39 is faster than 2.4.19 and same as 2.5.38-mm2
Quoted 1 line
I'll run further test...
Not really needed. I'm convinced the difference is there, and the people who can act on the data probably will be happy with that much information too. Some are less satisfied with the quality of the data unless there is firm statistical data to support the hypothesis. Your time is better spent on other things.
Con