cmd680 doesn't works fine with 2.4.20
Quoted 7 lines · on Sat Feb 22 2003 08:44:41 EST Pallai Roland wrote:
[...]
I've same problem with kernel 2.4.20 on every CMD680-based card from different manufacturers. big (eg.: Maxtor DiamondMax Plus9 - 120G) slave drives wasn't works and detected incorrectly_untilthe first softreboot_! after that everything works fine, but not on the first boot..driver problem or it's works for anyone??
It was a driver problem, fixed in kernel 2.4.20-pre3.. writing through
a cmd680 card is still very slow (max 4-5M/s) but stable at least..
Signature · 1 line
DaP