Skip to contentSkip to conversation

cmd680 doesn't works fine with 2.4.20

DISCUSSION Pallai Roland 1 participant 1 message Feb 26, 2003

lore
Share & tools
lore
#0 lore raw
Quoted 7 lines · on Sat Feb 22 2003 08:44:41 EST Pallai Roland wrote:

[...]
I've same problem with kernel 2.4.20 on every CMD680-based card from different manufacturers. big (eg.: Maxtor DiamondMax Plus9 - 120G) slave drives wasn't works and detected incorrectly _until the first soft reboot_! after that everything works fine, but not on the first boot..

driver problem or it's works for anyone??

It was a driver problem, fixed in kernel 2.4.20-pre3.. writing through
a cmd680 card is still very slow (max 4-5M/s) but stable at least..

Signature · 1 line
  DaP