XFree86 seems to be being wrongly accused of doing the wrong thing
Quoted 10 lines
With 2.6.4 I'm getting the following messages very early in the boot long before XFree86 is started:
Mar 18 16:05:31 mudlark kernel: atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0). Mar 18 16:05:31 mudlark kernel: atkbd.c: This is an XFree86 bug. Itshouldn't access hardware directly.
They are repeated 6 times and are NOT the result of any keys being pressed or released.
this has been fixed in XFree86 HEAD (4.4.99.1)
see changelog entry nr. 6 - the changes can easily be backported to 4.3.0, and work as expected on my box. (no noise anymore)
Christian
Quoted 11 lines · Christian Guggenberger
Quoted 6 lines
With 2.6.4 I'm getting the following messages very early in the boot long before XFree86 is started:
Mar 18 16:05:31 mudlark kernel: atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0). Mar 18 16:05:31 mudlark kernel: atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly.They are repeated 6 times and are NOT the result of any keys being pressed or released.
this has been fixed in XFree86 HEAD (4.4.99.1)
see changelog entry nr. 6 - the changes can easily be backported to 4.3.0, and work as expected on my box. (no noise anymore)
I repeat. These messages are appearing when XFree86 is NOT running so there is no way that it can be the cause of them.
Peter
Signature · 4 lines
Dr Peter Williams, Chief Scientist [email protected] Aurema Pty Limited Tel:+61 2 9698 2322 PO Box 305, Strawberry Hills NSW 2012, Australia Fax:+61 2 9699 9174 79 Myrtle Street, Chippendale NSW 2008, Australia http://www.aurema.com
A message that is not in the archive (sent off-list or not yet received): 1079594175.1830.22.camel@bonnie79
A message that is not in the archive (sent off-list or not yet received): [email protected]
Quoted 20 lines · On 18.03.2004 08:57 Peter Williams wrote:
Quoted 19 lines · Christian Guggenberger
Quoted 15 lines · Peter Williams
Quoted 11 lines · Christian Guggenberger
Quoted 6 lines
With 2.6.4 I'm getting the following messages very early in the boot long before XFree86 is started:
Mar 18 16:05:31 mudlark kernel: atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0). Mar 18 16:05:31 mudlark kernel: atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly.They are repeated 6 times and are NOT the result of any keys being pressed or released.
this has been fixed in XFree86 HEAD (4.4.99.1)
see changelog entry nr. 6 - the changes can easily be backported to 4.3.0, and work as expected on my box. (no noise anymore)I repeat. These messages are appearing when XFree86 is NOT running so there is no way that it can be the cause of them.
Quoted 7 lines
Quoted 4 lines
yeah, sorry. After reading your previous mail I realized it, too. If you have some spare time, you could boot with init=/bin/bash and then start every boot script step by step to see which one is causing these kernel messages.
OK. As requested, I just did a boot with init=/bin/bash and the bad news is that the messages appeared before bash started. So I think that confirms my suspicion that they occur before any of the start scripts are invoked?
[cc'ed linux-kernel again]
Yeah, I do think so.
Quoted 8 lines · Christian Guggenberger
Quoted 7 lines
Quoted 7 lines
Quoted 2 lines
I repeat. These messages are appearing when XFree86 is NOT running so there is no way that it can be the cause of them.
yeah, sorry. After reading your previous mail I realized it, too. If you have some spare time, you could boot with init=/bin/bash and then start every boot script step by step to see which one is causing these kernel messages.
Quoted 7 lines
Quoted 4 lines
OK. As requested, I just did a boot with init=/bin/bash and the bad news is that the messages appeared before bash started. So I think that confirms my suspicion that they occur before any of the start scripts are invoked?
[cc'ed linux-kernel again]
Yeah, I do think so.
Ok. If it appeats with init=/bin/bash and you're not running kbdrate in your bashrc or profile, then this is likely a kernel or hardware problem.
Can you please #define DEBUG in drivers/input/serio/i8042.c, recompile, boot with init=/bin/bash, and then send me the resulting 'dmesg'? Thanks.
Signature · 2 lines
Vojtech Pavlik SuSE Labs, SuSE CR
Quoted 15 lines · Vojtech Pavlik
Quoted 10 lines · Christian Guggenberger
Quoted 10 lines
Quoted 7 lines
Quoted 1 line
I repeat. These messages are appearing when XFree86 is NOT running so there is no way that it can be the cause of them.
yeah, sorry. After reading your previous mail I realized it, too. If you have some spare time, you could boot with init=/bin/bash and then start every boot script step by step to see which one is causing these kernel messages.
OK. As requested, I just did a boot with init=/bin/bash and the bad news is that the messages appeared before bash started. So I think that confirms my suspicion that they occur before any of the start scripts are invoked?
Quoted 6 lines
Quoted 2 lines
[cc'ed linux-kernel again]
Yeah, I do think so.Ok. If it appeats with init=/bin/bash and you're not running kbdrate in your bashrc or profile,
As far as I can see kbdrate is NOT being run from /etc/bashrc, /etc/profile or any script in /etc/profile.d
Quoted 2 lines
then this is likely a kernel or hardware
problem.
It may be of interest that I've had to use psmouse.proto=imps in order to stop problems I was experiencing whereby back scroll on the mouse wheel was being interpreted as a right click. Both the mouse and the keyboard are cordless (Logitech Navigator Duo) and are being used via a KVM switch (1TEN CS-14).
Quoted 5 lines
Can you please #define DEBUG in
drivers/input/serio/i8042.c, recompile, boot with init=/bin/bash, and then send me the resulting 'dmesg'? Thanks.
dmesg output is attached as requested. Unfortunately, there's a bit missing from the start. I think this is because the typing I have to do to get a writable file system to save dmesg to causes lots of output from your debug code. If the missing output is a problem I can try harder to get a complete version.
Peter
Signature · 4 lines
Dr Peter Williams, Chief Scientist [email protected] Aurema Pty Limited Tel:+61 2 9698 2322 PO Box 305, Strawberry Hills NSW 2012, Australia Fax:+61 2 9699 9174 79 Myrtle Street, Chippendale NSW 2008, Australia http://www.aurema.com
i8042 (interrupt, aux, 12) [610]drivers/input/serio/i8042.c: d4 -> i8042 (command) [610] drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [610] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux, 12) [618] drivers/input/serio/i8042.c: d4 -> i8042 (command) [618] drivers/input/serio/i8042.c: e8 -> i8042 (parameter) [618] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux, 12) [626] drivers/input/serio/i8042.c: d4 -> i8042 (command) [626] drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [626] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux, 12) [638] drivers/input/serio/i8042.c: d4 -> i8042 (command) [638] drivers/input/serio/i8042.c: e8 -> i8042 (parameter) [638] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux, 12) [646] drivers/input/serio/i8042.c: d4 -> i8042 (command) [646] drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [646] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux, 12) [654] drivers/input/serio/i8042.c: d4 -> i8042 (command) [654] drivers/input/serio/i8042.c: e8 -> i8042 (parameter) [654] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux, 12) [666] drivers/input/serio/i8042.c: d4 -> i8042 (command) [666] drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [666] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux, 12) [674] drivers/input/serio/i8042.c: d4 -> i8042 (command) [674] drivers/input/serio/i8042.c: e9 -> i8042 (parameter) [674] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux, 12) [683] drivers/input/serio/i8042.c: 00 <- i8042 (interrupt, aux, 12) [686] drivers/input/serio/i8042.c: 00 <- i8042 (interrupt, aux, 12) [690] drivers/input/serio/i8042.c: 64 <- i8042 (interrupt, aux, 12) [694] drivers/input/serio/i8042.c: d4 -> i8042 (command) [694] drivers/input/serio/i8042.c: f3 -> i8042 (parameter) [694] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux, 12) [702] drivers/input/serio/i8042.c: d4 -> i8042 (command) [702] drivers/input/serio/i8042.c: c8 -> i8042 (parameter) [702] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux, 12) [710] drivers/input/serio/i8042.c: d4 -> i8042 (command) [710] drivers/input/serio/i8042.c: f3 -> i8042 (parameter) [710] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux, 12) [718] drivers/input/serio/i8042.c: d4 -> i8042 (command) [718] drivers/input/serio/i8042.c: 64 -> i8042 (parameter) [718] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux, 12) [726] drivers/input/serio/i8042.c: d4 -> i8042 (command) [726] drivers/input/serio/i8042.c: f3 -> i8042 (parameter) [726] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux, 12) [738] drivers/input/serio/i8042.c: d4 -> i8042 (command) [738] drivers/input/serio/i8042.c: 50 -> i8042 (parameter) [738] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux, 12) [746] drivers/input/serio/i8042.c: d4 -> i8042 (command) [746] drivers/input/serio/i8042.c: f2 -> i8042 (parameter) [746] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux, 12) [754] drivers/input/serio/i8042.c: 03 <- i8042 (interrupt, aux, 12) [758]
input: ImPS/2 Generic Wheel Mouse on isa0060/serio1drivers/input/serio/i8042.c: d4 -> i8042 (command) [758] drivers/input/serio/i8042.c: f3 -> i8042 (parameter) [758] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux, 12) [766] drivers/input/serio/i8042.c: d4 -> i8042 (command) [766] drivers/input/serio/i8042.c: 64 -> i8042 (parameter) [766] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux, 12) [778] drivers/input/serio/i8042.c: d4 -> i8042 (command) [778] drivers/input/serio/i8042.c: e8 -> i8042 (parameter) [778] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux, 12) [786] drivers/input/serio/i8042.c: d4 -> i8042 (command) [786] drivers/input/serio/i8042.c: 03 -> i8042 (parameter) [786] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux, 12) [794] drivers/input/serio/i8042.c: d4 -> i8042 (command) [794] drivers/input/serio/i8042.c: e6 -> i8042 (parameter) [794] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux, 12) [806] drivers/input/serio/i8042.c: d4 -> i8042 (command) [806] drivers/input/serio/i8042.c: ea -> i8042 (parameter) [806] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux, 12) [814] drivers/input/serio/i8042.c: d4 -> i8042 (command) [814] drivers/input/serio/i8042.c: f4 -> i8042 (parameter) [814] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux, 12) [818] drivers/input/serio/i8042.c: 60 -> i8042 (command) [818] drivers/input/serio/i8042.c: 46 -> i8042 (parameter) [818]
serio: i8042 KBD port at 0x60,0x64 irq 1drivers/input/serio/i8042.c: 60 -> i8042 (command) [819] drivers/input/serio/i8042.c: 47 -> i8042 (parameter) [819] drivers/input/serio/i8042.c: f2 -> i8042 (kbd-data) [820] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, kbd, 1) [822] drivers/input/serio/i8042.c: ab <- i8042 (interrupt, kbd, 1) [826] drivers/input/serio/i8042.c: 41 <- i8042 (interrupt, kbd, 1) [830] drivers/input/serio/i8042.c: ed -> i8042 (kbd-data) [830] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, kbd, 1) [837] drivers/input/serio/i8042.c: 00 -> i8042 (kbd-data) [837] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, kbd, 1) [844] drivers/input/serio/i8042.c: f3 -> i8042 (kbd-data) [844] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, kbd, 1) [850] drivers/input/serio/i8042.c: 00 -> i8042 (kbd-data) [850] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, kbd, 1) [857] drivers/input/serio/i8042.c: f4 -> i8042 (kbd-data) [857] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, kbd, 1) [863]
input: AT Translated Set 2 keyboard on isa0060/serio0
Advanced Linux Sound Architecture Driver Version 1.0.2c (Thu Feb 05 15:41:49 2004 UTC). ALSA device list:
No soundcards found.
oprofile: using timer interrupt.
NET: Registered protocol family 2drivers/input/serio/i8042.c: fa <- i8042 (interrupt, kbd, 1) [866]atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0). atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly. drivers/input/serio/i8042.c: fa <- i8042 (interrupt, kbd, 1) [870]atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0). atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly. drivers/input/serio/i8042.c: fa <- i8042 (interrupt, kbd, 1) [874]atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0). atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly. drivers/input/serio/i8042.c: fa <- i8042 (interrupt, kbd, 1) [878]atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0). atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly.
IP: routing cache hash table of 8192 buckets, 64Kbytes drivers/input/serio/i8042.c: fa <- i8042 (interrupt, kbd, 1) [882]atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0). atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly.
TCP: Hash tables configured (established 262144 bind 65536)ip_conntrack version 2.1 (8191 buckets, 65528 max) - 296 bytes per conntrack drivers/input/serio/i8042.c: fa <- i8042 (interrupt, kbd, 1) [886]atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0). atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly.ip_tables: (C) 2000-2002 Netfilter core teamipt_recent v0.3.1: Stephen Frost <[email protected]>. http://snowman.net/projects/ipt_recent/arp_tables: (C) 2002 David S. Miller
NET: Registered protocol family 1
NET: Registered protocol family 17
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 144k freeddrivers/input/serio/i8042.c: 32 <- i8042 (interrupt, kbd, 1) [3394] drivers/input/serio/i8042.c: b2 <- i8042 (interrupt, kbd, 1) [3500] drivers/input/serio/i8042.c: 18 <- i8042 (interrupt, kbd, 1) [3713] drivers/input/serio/i8042.c: 98 <- i8042 (interrupt, kbd, 1) [3805] drivers/input/serio/i8042.c: 16 <- i8042 (interrupt, kbd, 1) [3993] drivers/input/serio/i8042.c: 96 <- i8042 (interrupt, kbd, 1) [4093] drivers/input/serio/i8042.c: 31 <- i8042 (interrupt, kbd, 1) [4260] drivers/input/serio/i8042.c: b1 <- i8042 (interrupt, kbd, 1) [4371] drivers/input/serio/i8042.c: 14 <- i8042 (interrupt, kbd, 1) [4707] drivers/input/serio/i8042.c: 94 <- i8042 (interrupt, kbd, 1) [4854] drivers/input/serio/i8042.c: 39 <- i8042 (interrupt, kbd, 1) [5170] drivers/input/serio/i8042.c: b9 <- i8042 (interrupt, kbd, 1) [5291] drivers/input/serio/i8042.c: 35 <- i8042 (interrupt, kbd, 1) [6902] drivers/input/serio/i8042.c: b5 <- i8042 (interrupt, kbd, 1) [7044] drivers/input/serio/i8042.c: 32 <- i8042 (interrupt, kbd, 1) [8740] drivers/input/serio/i8042.c: b2 <- i8042 (interrupt, kbd, 1) [8846] drivers/input/serio/i8042.c: 31 <- i8042 (interrupt, kbd, 1) [8996] drivers/input/serio/i8042.c: b1 <- i8042 (interrupt, kbd, 1) [9103] drivers/input/serio/i8042.c: 14 <- i8042 (interrupt, kbd, 1) [9474] drivers/input/serio/i8042.c: 94 <- i8042 (interrupt, kbd, 1) [9572] drivers/input/serio/i8042.c: 35 <- i8042 (interrupt, kbd, 1) [10453] drivers/input/serio/i8042.c: b5 <- i8042 (interrupt, kbd, 1) [10551] drivers/input/serio/i8042.c: 2c <- i8042 (interrupt, kbd, 1) [11048] drivers/input/serio/i8042.c: ac <- i8042 (interrupt, kbd, 1) [11227] drivers/input/serio/i8042.c: 17 <- i8042 (interrupt, kbd, 1) [11359] drivers/input/serio/i8042.c: 97 <- i8042 (interrupt, kbd, 1) [11443] drivers/input/serio/i8042.c: 19 <- i8042 (interrupt, kbd, 1) [11926] drivers/input/serio/i8042.c: 99 <- i8042 (interrupt, kbd, 1) [12044] drivers/input/serio/i8042.c: 1c <- i8042 (interrupt, kbd, 1) [13278] drivers/input/serio/i8042.c: 9c <- i8042 (interrupt, kbd, 1) [13428] drivers/input/serio/i8042.c: 20 <- i8042 (interrupt, kbd, 1) [17283] drivers/input/serio/i8042.c: a0 <- i8042 (interrupt, kbd, 1) [17398] drivers/input/serio/i8042.c: 32 <- i8042 (interrupt, kbd, 1) [17539] drivers/input/serio/i8042.c: b2 <- i8042 (interrupt, kbd, 1) [17653] drivers/input/serio/i8042.c: 12 <- i8042 (interrupt, kbd, 1) [17730] drivers/input/serio/i8042.c: 92 <- i8042 (interrupt, kbd, 1) [17837] drivers/input/serio/i8042.c: 1f <- i8042 (interrupt, kbd, 1) [18098] drivers/input/serio/i8042.c: 9f <- i8042 (interrupt, kbd, 1) [18273] drivers/input/serio/i8042.c: 22 <- i8042 (interrupt, kbd, 1) [18560] drivers/input/serio/i8042.c: a2 <- i8042 (interrupt, kbd, 1) [18693] drivers/input/serio/i8042.c: 39 <- i8042 (interrupt, kbd, 1) [19279] drivers/input/serio/i8042.c: b9 <- i8042 (interrupt, kbd, 1) [19387] drivers/input/serio/i8042.c: 2a <- i8042 (interrupt, kbd, 1) [19810] drivers/input/serio/i8042.c: 2a <- i8042 (interrupt, kbd, 1) [20063] drivers/input/serio/i8042.c: 2a <- i8042 (interrupt, kbd, 1) [20095] drivers/input/serio/i8042.c: 2a <- i8042 (interrupt, kbd, 1) [20128] drivers/input/serio/i8042.c: 2a <- i8042 (interrupt, kbd, 1) [20160] drivers/input/serio/i8042.c: 2a <- i8042 (interrupt, kbd, 1) [20193] drivers/input/serio/i8042.c: 2a <- i8042 (interrupt, kbd, 1) [20225] drivers/input/serio/i8042.c: 2a <- i8042 (interrupt, kbd, 1) [20257] drivers/input/serio/i8042.c: 2a <- i8042 (interrupt, kbd, 1) [20289] drivers/input/serio/i8042.c: 2a <- i8042 (interrupt, kbd, 1) [20322] drivers/input/serio/i8042.c: 2a <- i8042 (interrupt, kbd, 1) [20354] drivers/input/serio/i8042.c: 2a <- i8042 (interrupt, kbd, 1) [20386] drivers/input/serio/i8042.c: 2a <- i8042 (interrupt, kbd, 1) [20419] drivers/input/serio/i8042.c: 2a <- i8042 (interrupt, kbd, 1) [20451] drivers/input/serio/i8042.c: 2a <- i8042 (interrupt, kbd, 1) [20483] drivers/input/serio/i8042.c: 2a <- i8042 (interrupt, kbd, 1) [20515] drivers/input/serio/i8042.c: 2a <- i8042 (interrupt, kbd, 1) [20548] drivers/input/serio/i8042.c: 2a <- i8042 (interrupt, kbd, 1) [20580] drivers/input/serio/i8042.c: 2a <- i8042 (interrupt, kbd, 1) [20612] drivers/input/serio/i8042.c: 34 <- i8042 (interrupt, kbd, 1) [20634] drivers/input/serio/i8042.c: b4 <- i8042 (interrupt, kbd, 1) [20726] drivers/input/serio/i8042.c: aa <- i8042 (interrupt, kbd, 1) [20893] drivers/input/serio/i8042.c: 39 <- i8042 (interrupt, kbd, 1) [22266] drivers/input/serio/i8042.c: b9 <- i8042 (interrupt, kbd, 1) [22410] drivers/input/serio/i8042.c: 35 <- i8042 (interrupt, kbd, 1) [23358] drivers/input/serio/i8042.c: b5 <- i8042 (interrupt, kbd, 1) [23469] drivers/input/serio/i8042.c: 32 <- i8042 (interrupt, kbd, 1) [23835] drivers/input/serio/i8042.c: b2 <- i8042 (interrupt, kbd, 1) [23935] drivers/input/serio/i8042.c: 31 <- i8042 (interrupt, kbd, 1) [24063] drivers/input/serio/i8042.c: b1 <- i8042 (interrupt, kbd, 1) [24169] drivers/input/serio/i8042.c: 14 <- i8042 (interrupt, kbd, 1) [24483] drivers/input/serio/i8042.c: 94 <- i8042 (interrupt, kbd, 1) [24579] drivers/input/serio/i8042.c: 35 <- i8042 (interrupt, kbd, 1) [25509] drivers/input/serio/i8042.c: b5 <- i8042 (interrupt, kbd, 1) [25618] drivers/input/serio/i8042.c: 2c <- i8042 (interrupt, kbd, 1) [26047] drivers/input/serio/i8042.c: ac <- i8042 (interrupt, kbd, 1) [26221] drivers/input/serio/i8042.c: 17 <- i8042 (interrupt, kbd, 1) [26388] drivers/input/serio/i8042.c: 97 <- i8042 (interrupt, kbd, 1) [26483] drivers/input/serio/i8042.c: 19 <- i8042 (interrupt, kbd, 1) [26884] drivers/input/serio/i8042.c: 99 <- i8042 (interrupt, kbd, 1) [27011] drivers/input/serio/i8042.c: 35 <- i8042 (interrupt, kbd, 1) [27885] drivers/input/serio/i8042.c: b5 <- i8042 (interrupt, kbd, 1) [27988] drivers/input/serio/i8042.c: 20 <- i8042 (interrupt, kbd, 1) [28525] drivers/input/serio/i8042.c: a0 <- i8042 (interrupt, kbd, 1) [28648] drivers/input/serio/i8042.c: 32 <- i8042 (interrupt, kbd, 1) [28842] drivers/input/serio/i8042.c: b2 <- i8042 (interrupt, kbd, 1) [28941] drivers/input/serio/i8042.c: 12 <- i8042 (interrupt, kbd, 1) [29003] drivers/input/serio/i8042.c: 92 <- i8042 (interrupt, kbd, 1) [29094] drivers/input/serio/i8042.c: 1f <- i8042 (interrupt, kbd, 1) [29258] drivers/input/serio/i8042.c: 9f <- i8042 (interrupt, kbd, 1) [29449] drivers/input/serio/i8042.c: 22 <- i8042 (interrupt, kbd, 1) [29582] drivers/input/serio/i8042.c: a2 <- i8042 (interrupt, kbd, 1) [29670] drivers/input/serio/i8042.c: 34 <- i8042 (interrupt, kbd, 1) [30268] drivers/input/serio/i8042.c: b4 <- i8042 (interrupt, kbd, 1) [30371] drivers/input/serio/i8042.c: 14 <- i8042 (interrupt, kbd, 1) [30900] drivers/input/serio/i8042.c: 94 <- i8042 (interrupt, kbd, 1) [30995] drivers/input/serio/i8042.c: 12 <- i8042 (interrupt, kbd, 1) [31167] drivers/input/serio/i8042.c: 92 <- i8042 (interrupt, kbd, 1) [31291] drivers/input/serio/i8042.c: 2d <- i8042 (interrupt, kbd, 1) [31510] drivers/input/serio/i8042.c: ad <- i8042 (interrupt, kbd, 1) [31719] drivers/input/serio/i8042.c: 14 <- i8042 (interrupt, kbd, 1) [31760] drivers/input/serio/i8042.c: 94 <- i8042 (interrupt, kbd, 1) [31823] drivers/input/serio/i8042.c: 0e <- i8042 (interrupt, kbd, 1) [33690] drivers/input/serio/i8042.c: 8e <- i8042 (interrupt, kbd, 1) [33795] drivers/input/serio/i8042.c: 0e <- i8042 (interrupt, kbd, 1) [33887] drivers/input/serio/i8042.c: 8e <- i8042 (interrupt, kbd, 1) [33952] drivers/input/serio/i8042.c: 0e <- i8042 (interrupt, kbd, 1) [34042] drivers/input/serio/i8042.c: 8e <- i8042 (interrupt, kbd, 1) [34086] drivers/input/serio/i8042.c: 2d <- i8042 (interrupt, kbd, 1) [35022] drivers/input/serio/i8042.c: ad <- i8042 (interrupt, kbd, 1) [35246] drivers/input/serio/i8042.c: 14 <- i8042 (interrupt, kbd, 1) [35286] drivers/input/serio/i8042.c: 94 <- i8042 (interrupt, kbd, 1) [35351] drivers/input/serio/i8042.c: 1c <- i8042 (interrupt, kbd, 1) [35995]
Quoted 13 lines · Peter Williams
Quoted 12 lines · Christian Guggenberger
Quoted 10 lines
With 2.6.4 I'm getting the following messages very early in the boot long before XFree86 is started:
Mar 18 16:05:31 mudlark kernel: atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0). Mar 18 16:05:31 mudlark kernel: atkbd.c: This is an XFree86 bug. Itshouldn't access hardware directly.
They are repeated 6 times and are NOT the result of any keys being pressed or released.
Quoted 6 lines
Quoted 3 lines
this has been fixed in XFree86 HEAD (4.4.99.1)
see changelog entry nr. 6 - the changes can easily be backported to 4.3.0, and work as expected on my box. (no noise anymore)I repeat. These messages are appearing when XFree86 is NOT running so there is no way that it can be the cause of them.
I have the exact same behaviour on my machine.
(my 2 cents)
Regards
Signature · 6 lines
Emmanuel Fleury Computer Science Department, | Office: B1-201 Aalborg University, | Phone: +45 96 35 72 23 Fredriks Bajersvej 7E, | Fax: +45 98 15 98 89 9220 Aalborg East, Denmark | Email: [email protected]
Quoted 3 lines · Christian Guggenberger
Quoted 3 lines
With 2.6.4 I'm getting the following messages very early in the boot long before XFree86 is started:
oops, must have overlook this sentence before - should get a coffee first. Well in that case, XFree86 should not have been blamed. sorry for the noise.
Quoted 12 lines
Quoted 7 lines
Mar 18 16:05:31 mudlark kernel: atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0). Mar 18 16:05:31 mudlark kernel: atkbd.c: This is an XFree86 bug. Itshouldn't access hardware directly.
They are repeated 6 times and are NOT the result of any keys being pressed or released.
this has been fixed in XFree86 HEAD (4.4.99.1)
see changelog entry nr. 6 - the changes can easily be backported to 4.3.0, and work as expected on my box. (no noise anymore)