Skip to contentSkip to conversation

XFree86 seems to be being wrongly accused of doing the wrong thing

DISCUSSION Christian Guggenberger 4 participants 7 messages Mar 18, 2004 – Mar 19, 2004 2 messages not in the archive

lore
Share & tools
lore
#0 lore raw
Quoted 10 lines

With 2.6.4 I'm getting the following messages very early in the boot long before XFree86 is started:

Mar 18 16:05:31 mudlark kernel: atkbd.c: Unknown key released 
(translated set 2, code 0x7a on isa0060/serio0).
Mar 18 16:05:31 mudlark kernel: atkbd.c: This is an XFree86 bug. It 

shouldn't access hardware directly.

They are repeated 6 times and are NOT the result of any keys being pressed or released.

this has been fixed in XFree86 HEAD (4.4.99.1)
see changelog entry nr. 6 - the changes can easily be backported to 4.3.0, and work as expected on my box. (no noise anymore)

Christian

#1 lore raw
Quoted 11 lines · Christian Guggenberger
Quoted 6 lines

With 2.6.4 I'm getting the following messages very early in the boot long before XFree86 is started:

Mar 18 16:05:31 mudlark kernel: atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0).
Mar 18 16:05:31 mudlark kernel: atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly.

They are repeated 6 times and are NOT the result of any keys being pressed or released.

this has been fixed in XFree86 HEAD (4.4.99.1)
see changelog entry nr. 6 - the changes can easily be backported to 4.3.0, and work as expected on my box. (no noise anymore)

I repeat. These messages are appearing when XFree86 is NOT running so there is no way that it can be the cause of them.

Peter

Signature · 4 lines
Dr Peter Williams, Chief Scientist                [email protected]
Aurema Pty Limited                                Tel:+61 2 9698 2322
PO Box 305, Strawberry Hills NSW 2012, Australia  Fax:+61 2 9699 9174
79 Myrtle Street, Chippendale NSW 2008, Australia http://www.aurema.com

A message that is not in the archive (sent off-list or not yet received): 1079594175.1830.22.camel@bonnie79

A message that is not in the archive (sent off-list or not yet received): [email protected]

#4 lore raw
Quoted 20 lines · On 18.03.2004 08:57 Peter Williams wrote:
Quoted 19 lines · Christian Guggenberger
Quoted 15 lines · Peter Williams
Quoted 11 lines · Christian Guggenberger
Quoted 6 lines

With 2.6.4 I'm getting the following messages very early in the boot long before XFree86 is started:

Mar 18 16:05:31 mudlark kernel: atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0).
Mar 18 16:05:31 mudlark kernel: atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly.

They are repeated 6 times and are NOT the result of any keys being pressed or released.

this has been fixed in XFree86 HEAD (4.4.99.1)
see changelog entry nr. 6 - the changes can easily be backported to 4.3.0, and work as expected on my box. (no noise anymore)

I repeat. These messages are appearing when XFree86 is NOT running so there is no way that it can be the cause of them.

Quoted 7 lines
Quoted 4 lines

yeah, sorry. After reading your previous mail I realized it, too. If you have some spare time, you could boot with init=/bin/bash and then start every boot script step by step to see which one is causing these kernel messages.

OK. As requested, I just did a boot with init=/bin/bash and the bad news is that the messages appeared before bash started. So I think that confirms my suspicion that they occur before any of the start scripts are invoked?

[cc'ed linux-kernel again]

Yeah, I do think so.

#5 lore raw
Quoted 8 lines · Christian Guggenberger
Quoted 7 lines
Quoted 7 lines
Quoted 2 lines

I repeat. These messages are appearing when XFree86 is NOT running so there is no way that it can be the cause of them.

yeah, sorry. After reading your previous mail I realized it, too. If you have some spare time, you could boot with init=/bin/bash and then start every boot script step by step to see which one is causing these kernel messages.

Quoted 7 lines
Quoted 4 lines

OK. As requested, I just did a boot with init=/bin/bash and the bad news is that the messages appeared before bash started. So I think that confirms my suspicion that they occur before any of the start scripts are invoked?

[cc'ed linux-kernel again]
Yeah, I do think so.

Ok. If it appeats with init=/bin/bash and you're not running kbdrate in your bashrc or profile, then this is likely a kernel or hardware problem.

Can you please #define DEBUG in drivers/input/serio/i8042.c, recompile, boot with init=/bin/bash, and then send me the resulting 'dmesg'? Thanks.

Signature · 2 lines
Vojtech Pavlik
SuSE Labs, SuSE CR
#6 lore raw
Quoted 15 lines · Vojtech Pavlik
Quoted 10 lines · Christian Guggenberger
Quoted 10 lines
Quoted 7 lines
Quoted 1 line

I repeat. These messages are appearing when XFree86 is NOT running so there is no way that it can be the cause of them.

yeah, sorry. After reading your previous mail I realized it, too. If you have some spare time, you could boot with init=/bin/bash and then start every boot script step by step to see which one is causing these kernel messages.

OK. As requested, I just did a boot with init=/bin/bash and the bad news is that the messages appeared before bash started. So I think that confirms my suspicion that they occur before any of the start scripts are invoked?

Quoted 6 lines
Quoted 2 lines

[cc'ed linux-kernel again]
Yeah, I do think so.

Ok. If it appeats with init=/bin/bash and you're not running kbdrate in your bashrc or profile,

As far as I can see kbdrate is NOT being run from /etc/bashrc, /etc/profile or any script in /etc/profile.d

Quoted 2 lines

then this is likely a kernel or hardware
problem.

It may be of interest that I've had to use psmouse.proto=imps in order to stop problems I was experiencing whereby back scroll on the mouse wheel was being interpreted as a right click. Both the mouse and the keyboard are cordless (Logitech Navigator Duo) and are being used via a KVM switch (1TEN CS-14).

Quoted 5 lines

Can you please #define DEBUG in drivers/input/serio/i8042.c, recompile, boot with init=/bin/bash, and then send me the resulting 'dmesg'? Thanks.

dmesg output is attached as requested. Unfortunately, there's a bit missing from the start. I think this is because the typing I have to do to get a writable file system to save dmesg to causes lots of output from your debug code. If the missing output is a problem I can try harder to get a complete version.

Peter

Signature · 4 lines
Dr Peter Williams, Chief Scientist                [email protected]
Aurema Pty Limited                                Tel:+61 2 9698 2322
PO Box 305, Strawberry Hills NSW 2012, Australia  Fax:+61 2 9699 9174
79 Myrtle Street, Chippendale NSW 2008, Australia http://www.aurema.com

i8042 (interrupt, aux, 12) [610]
drivers/input/serio/i8042.c: d4 -> i8042 (command) [610] drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [610] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux, 12) [618] drivers/input/serio/i8042.c: d4 -> i8042 (command) [618] drivers/input/serio/i8042.c: e8 -> i8042 (parameter) [618] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux, 12) [626] drivers/input/serio/i8042.c: d4 -> i8042 (command) [626] drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [626] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux, 12) [638] drivers/input/serio/i8042.c: d4 -> i8042 (command) [638] drivers/input/serio/i8042.c: e8 -> i8042 (parameter) [638] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux, 12) [646] drivers/input/serio/i8042.c: d4 -> i8042 (command) [646] drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [646] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux, 12) [654] drivers/input/serio/i8042.c: d4 -> i8042 (command) [654] drivers/input/serio/i8042.c: e8 -> i8042 (parameter) [654] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux, 12) [666] drivers/input/serio/i8042.c: d4 -> i8042 (command) [666] drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [666] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux, 12) [674] drivers/input/serio/i8042.c: d4 -> i8042 (command) [674] drivers/input/serio/i8042.c: e9 -> i8042 (parameter) [674] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux, 12) [683] drivers/input/serio/i8042.c: 00 <- i8042 (interrupt, aux, 12) [686] drivers/input/serio/i8042.c: 00 <- i8042 (interrupt, aux, 12) [690] drivers/input/serio/i8042.c: 64 <- i8042 (interrupt, aux, 12) [694] drivers/input/serio/i8042.c: d4 -> i8042 (command) [694] drivers/input/serio/i8042.c: f3 -> i8042 (parameter) [694] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux, 12) [702] drivers/input/serio/i8042.c: d4 -> i8042 (command) [702] drivers/input/serio/i8042.c: c8 -> i8042 (parameter) [702] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux, 12) [710] drivers/input/serio/i8042.c: d4 -> i8042 (command) [710] drivers/input/serio/i8042.c: f3 -> i8042 (parameter) [710] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux, 12) [718] drivers/input/serio/i8042.c: d4 -> i8042 (command) [718] drivers/input/serio/i8042.c: 64 -> i8042 (parameter) [718] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux, 12) [726] drivers/input/serio/i8042.c: d4 -> i8042 (command) [726] drivers/input/serio/i8042.c: f3 -> i8042 (parameter) [726] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux, 12) [738] drivers/input/serio/i8042.c: d4 -> i8042 (command) [738] drivers/input/serio/i8042.c: 50 -> i8042 (parameter) [738] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux, 12) [746] drivers/input/serio/i8042.c: d4 -> i8042 (command) [746] drivers/input/serio/i8042.c: f2 -> i8042 (parameter) [746] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux, 12) [754] drivers/input/serio/i8042.c: 03 <- i8042 (interrupt, aux, 12) [758]
input: ImPS/2 Generic Wheel Mouse on isa0060/serio1
drivers/input/serio/i8042.c: d4 -> i8042 (command) [758] drivers/input/serio/i8042.c: f3 -> i8042 (parameter) [758] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux, 12) [766] drivers/input/serio/i8042.c: d4 -> i8042 (command) [766] drivers/input/serio/i8042.c: 64 -> i8042 (parameter) [766] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux, 12) [778] drivers/input/serio/i8042.c: d4 -> i8042 (command) [778] drivers/input/serio/i8042.c: e8 -> i8042 (parameter) [778] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux, 12) [786] drivers/input/serio/i8042.c: d4 -> i8042 (command) [786] drivers/input/serio/i8042.c: 03 -> i8042 (parameter) [786] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux, 12) [794] drivers/input/serio/i8042.c: d4 -> i8042 (command) [794] drivers/input/serio/i8042.c: e6 -> i8042 (parameter) [794] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux, 12) [806] drivers/input/serio/i8042.c: d4 -> i8042 (command) [806] drivers/input/serio/i8042.c: ea -> i8042 (parameter) [806] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux, 12) [814] drivers/input/serio/i8042.c: d4 -> i8042 (command) [814] drivers/input/serio/i8042.c: f4 -> i8042 (parameter) [814] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux, 12) [818] drivers/input/serio/i8042.c: 60 -> i8042 (command) [818] drivers/input/serio/i8042.c: 46 -> i8042 (parameter) [818]
serio: i8042 KBD port at 0x60,0x64 irq 1
drivers/input/serio/i8042.c: 60 -> i8042 (command) [819] drivers/input/serio/i8042.c: 47 -> i8042 (parameter) [819] drivers/input/serio/i8042.c: f2 -> i8042 (kbd-data) [820] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, kbd, 1) [822] drivers/input/serio/i8042.c: ab <- i8042 (interrupt, kbd, 1) [826] drivers/input/serio/i8042.c: 41 <- i8042 (interrupt, kbd, 1) [830] drivers/input/serio/i8042.c: ed -> i8042 (kbd-data) [830] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, kbd, 1) [837] drivers/input/serio/i8042.c: 00 -> i8042 (kbd-data) [837] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, kbd, 1) [844] drivers/input/serio/i8042.c: f3 -> i8042 (kbd-data) [844] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, kbd, 1) [850] drivers/input/serio/i8042.c: 00 -> i8042 (kbd-data) [850] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, kbd, 1) [857] drivers/input/serio/i8042.c: f4 -> i8042 (kbd-data) [857] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, kbd, 1) [863]
input: AT Translated Set 2 keyboard on isa0060/serio0
Advanced Linux Sound Architecture Driver Version 1.0.2c (Thu Feb 05 15:41:49 2004 UTC). ALSA device list:
No soundcards found.
oprofile: using timer interrupt.
NET: Registered protocol family 2
drivers/input/serio/i8042.c: fa <- i8042 (interrupt, kbd, 1) [866]
atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0). atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly. drivers/input/serio/i8042.c: fa <- i8042 (interrupt, kbd, 1) [870]
atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0). atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly. drivers/input/serio/i8042.c: fa <- i8042 (interrupt, kbd, 1) [874]
atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0). atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly. drivers/input/serio/i8042.c: fa <- i8042 (interrupt, kbd, 1) [878]
atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0). atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly.
IP: routing cache hash table of 8192 buckets, 64Kbytes drivers/input/serio/i8042.c: fa <- i8042 (interrupt, kbd, 1) [882]
atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0). atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly.
TCP: Hash tables configured (established 262144 bind 65536)
ip_conntrack version 2.1 (8191 buckets, 65528 max) - 296 bytes per conntrack drivers/input/serio/i8042.c: fa <- i8042 (interrupt, kbd, 1) [886]
atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0). atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly.
ip_tables: (C) 2000-2002 Netfilter core team
ipt_recent v0.3.1: Stephen Frost <[email protected]>. http://snowman.net/projects/ipt_recent/
arp_tables: (C) 2002 David S. Miller
NET: Registered protocol family 1
NET: Registered protocol family 17
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 144k freed
drivers/input/serio/i8042.c: 32 <- i8042 (interrupt, kbd, 1) [3394] drivers/input/serio/i8042.c: b2 <- i8042 (interrupt, kbd, 1) [3500] drivers/input/serio/i8042.c: 18 <- i8042 (interrupt, kbd, 1) [3713] drivers/input/serio/i8042.c: 98 <- i8042 (interrupt, kbd, 1) [3805] drivers/input/serio/i8042.c: 16 <- i8042 (interrupt, kbd, 1) [3993] drivers/input/serio/i8042.c: 96 <- i8042 (interrupt, kbd, 1) [4093] drivers/input/serio/i8042.c: 31 <- i8042 (interrupt, kbd, 1) [4260] drivers/input/serio/i8042.c: b1 <- i8042 (interrupt, kbd, 1) [4371] drivers/input/serio/i8042.c: 14 <- i8042 (interrupt, kbd, 1) [4707] drivers/input/serio/i8042.c: 94 <- i8042 (interrupt, kbd, 1) [4854] drivers/input/serio/i8042.c: 39 <- i8042 (interrupt, kbd, 1) [5170] drivers/input/serio/i8042.c: b9 <- i8042 (interrupt, kbd, 1) [5291] drivers/input/serio/i8042.c: 35 <- i8042 (interrupt, kbd, 1) [6902] drivers/input/serio/i8042.c: b5 <- i8042 (interrupt, kbd, 1) [7044] drivers/input/serio/i8042.c: 32 <- i8042 (interrupt, kbd, 1) [8740] drivers/input/serio/i8042.c: b2 <- i8042 (interrupt, kbd, 1) [8846] drivers/input/serio/i8042.c: 31 <- i8042 (interrupt, kbd, 1) [8996] drivers/input/serio/i8042.c: b1 <- i8042 (interrupt, kbd, 1) [9103] drivers/input/serio/i8042.c: 14 <- i8042 (interrupt, kbd, 1) [9474] drivers/input/serio/i8042.c: 94 <- i8042 (interrupt, kbd, 1) [9572] drivers/input/serio/i8042.c: 35 <- i8042 (interrupt, kbd, 1) [10453] drivers/input/serio/i8042.c: b5 <- i8042 (interrupt, kbd, 1) [10551] drivers/input/serio/i8042.c: 2c <- i8042 (interrupt, kbd, 1) [11048] drivers/input/serio/i8042.c: ac <- i8042 (interrupt, kbd, 1) [11227] drivers/input/serio/i8042.c: 17 <- i8042 (interrupt, kbd, 1) [11359] drivers/input/serio/i8042.c: 97 <- i8042 (interrupt, kbd, 1) [11443] drivers/input/serio/i8042.c: 19 <- i8042 (interrupt, kbd, 1) [11926] drivers/input/serio/i8042.c: 99 <- i8042 (interrupt, kbd, 1) [12044] drivers/input/serio/i8042.c: 1c <- i8042 (interrupt, kbd, 1) [13278] drivers/input/serio/i8042.c: 9c <- i8042 (interrupt, kbd, 1) [13428] drivers/input/serio/i8042.c: 20 <- i8042 (interrupt, kbd, 1) [17283] drivers/input/serio/i8042.c: a0 <- i8042 (interrupt, kbd, 1) [17398] drivers/input/serio/i8042.c: 32 <- i8042 (interrupt, kbd, 1) [17539] drivers/input/serio/i8042.c: b2 <- i8042 (interrupt, kbd, 1) [17653] drivers/input/serio/i8042.c: 12 <- i8042 (interrupt, kbd, 1) [17730] drivers/input/serio/i8042.c: 92 <- i8042 (interrupt, kbd, 1) [17837] drivers/input/serio/i8042.c: 1f <- i8042 (interrupt, kbd, 1) [18098] drivers/input/serio/i8042.c: 9f <- i8042 (interrupt, kbd, 1) [18273] drivers/input/serio/i8042.c: 22 <- i8042 (interrupt, kbd, 1) [18560] drivers/input/serio/i8042.c: a2 <- i8042 (interrupt, kbd, 1) [18693] drivers/input/serio/i8042.c: 39 <- i8042 (interrupt, kbd, 1) [19279] drivers/input/serio/i8042.c: b9 <- i8042 (interrupt, kbd, 1) [19387] drivers/input/serio/i8042.c: 2a <- i8042 (interrupt, kbd, 1) [19810] drivers/input/serio/i8042.c: 2a <- i8042 (interrupt, kbd, 1) [20063] drivers/input/serio/i8042.c: 2a <- i8042 (interrupt, kbd, 1) [20095] drivers/input/serio/i8042.c: 2a <- i8042 (interrupt, kbd, 1) [20128] drivers/input/serio/i8042.c: 2a <- i8042 (interrupt, kbd, 1) [20160] drivers/input/serio/i8042.c: 2a <- i8042 (interrupt, kbd, 1) [20193] drivers/input/serio/i8042.c: 2a <- i8042 (interrupt, kbd, 1) [20225] drivers/input/serio/i8042.c: 2a <- i8042 (interrupt, kbd, 1) [20257] drivers/input/serio/i8042.c: 2a <- i8042 (interrupt, kbd, 1) [20289] drivers/input/serio/i8042.c: 2a <- i8042 (interrupt, kbd, 1) [20322] drivers/input/serio/i8042.c: 2a <- i8042 (interrupt, kbd, 1) [20354] drivers/input/serio/i8042.c: 2a <- i8042 (interrupt, kbd, 1) [20386] drivers/input/serio/i8042.c: 2a <- i8042 (interrupt, kbd, 1) [20419] drivers/input/serio/i8042.c: 2a <- i8042 (interrupt, kbd, 1) [20451] drivers/input/serio/i8042.c: 2a <- i8042 (interrupt, kbd, 1) [20483] drivers/input/serio/i8042.c: 2a <- i8042 (interrupt, kbd, 1) [20515] drivers/input/serio/i8042.c: 2a <- i8042 (interrupt, kbd, 1) [20548] drivers/input/serio/i8042.c: 2a <- i8042 (interrupt, kbd, 1) [20580] drivers/input/serio/i8042.c: 2a <- i8042 (interrupt, kbd, 1) [20612] drivers/input/serio/i8042.c: 34 <- i8042 (interrupt, kbd, 1) [20634] drivers/input/serio/i8042.c: b4 <- i8042 (interrupt, kbd, 1) [20726] drivers/input/serio/i8042.c: aa <- i8042 (interrupt, kbd, 1) [20893] drivers/input/serio/i8042.c: 39 <- i8042 (interrupt, kbd, 1) [22266] drivers/input/serio/i8042.c: b9 <- i8042 (interrupt, kbd, 1) [22410] drivers/input/serio/i8042.c: 35 <- i8042 (interrupt, kbd, 1) [23358] drivers/input/serio/i8042.c: b5 <- i8042 (interrupt, kbd, 1) [23469] drivers/input/serio/i8042.c: 32 <- i8042 (interrupt, kbd, 1) [23835] drivers/input/serio/i8042.c: b2 <- i8042 (interrupt, kbd, 1) [23935] drivers/input/serio/i8042.c: 31 <- i8042 (interrupt, kbd, 1) [24063] drivers/input/serio/i8042.c: b1 <- i8042 (interrupt, kbd, 1) [24169] drivers/input/serio/i8042.c: 14 <- i8042 (interrupt, kbd, 1) [24483] drivers/input/serio/i8042.c: 94 <- i8042 (interrupt, kbd, 1) [24579] drivers/input/serio/i8042.c: 35 <- i8042 (interrupt, kbd, 1) [25509] drivers/input/serio/i8042.c: b5 <- i8042 (interrupt, kbd, 1) [25618] drivers/input/serio/i8042.c: 2c <- i8042 (interrupt, kbd, 1) [26047] drivers/input/serio/i8042.c: ac <- i8042 (interrupt, kbd, 1) [26221] drivers/input/serio/i8042.c: 17 <- i8042 (interrupt, kbd, 1) [26388] drivers/input/serio/i8042.c: 97 <- i8042 (interrupt, kbd, 1) [26483] drivers/input/serio/i8042.c: 19 <- i8042 (interrupt, kbd, 1) [26884] drivers/input/serio/i8042.c: 99 <- i8042 (interrupt, kbd, 1) [27011] drivers/input/serio/i8042.c: 35 <- i8042 (interrupt, kbd, 1) [27885] drivers/input/serio/i8042.c: b5 <- i8042 (interrupt, kbd, 1) [27988] drivers/input/serio/i8042.c: 20 <- i8042 (interrupt, kbd, 1) [28525] drivers/input/serio/i8042.c: a0 <- i8042 (interrupt, kbd, 1) [28648] drivers/input/serio/i8042.c: 32 <- i8042 (interrupt, kbd, 1) [28842] drivers/input/serio/i8042.c: b2 <- i8042 (interrupt, kbd, 1) [28941] drivers/input/serio/i8042.c: 12 <- i8042 (interrupt, kbd, 1) [29003] drivers/input/serio/i8042.c: 92 <- i8042 (interrupt, kbd, 1) [29094] drivers/input/serio/i8042.c: 1f <- i8042 (interrupt, kbd, 1) [29258] drivers/input/serio/i8042.c: 9f <- i8042 (interrupt, kbd, 1) [29449] drivers/input/serio/i8042.c: 22 <- i8042 (interrupt, kbd, 1) [29582] drivers/input/serio/i8042.c: a2 <- i8042 (interrupt, kbd, 1) [29670] drivers/input/serio/i8042.c: 34 <- i8042 (interrupt, kbd, 1) [30268] drivers/input/serio/i8042.c: b4 <- i8042 (interrupt, kbd, 1) [30371] drivers/input/serio/i8042.c: 14 <- i8042 (interrupt, kbd, 1) [30900] drivers/input/serio/i8042.c: 94 <- i8042 (interrupt, kbd, 1) [30995] drivers/input/serio/i8042.c: 12 <- i8042 (interrupt, kbd, 1) [31167] drivers/input/serio/i8042.c: 92 <- i8042 (interrupt, kbd, 1) [31291] drivers/input/serio/i8042.c: 2d <- i8042 (interrupt, kbd, 1) [31510] drivers/input/serio/i8042.c: ad <- i8042 (interrupt, kbd, 1) [31719] drivers/input/serio/i8042.c: 14 <- i8042 (interrupt, kbd, 1) [31760] drivers/input/serio/i8042.c: 94 <- i8042 (interrupt, kbd, 1) [31823] drivers/input/serio/i8042.c: 0e <- i8042 (interrupt, kbd, 1) [33690] drivers/input/serio/i8042.c: 8e <- i8042 (interrupt, kbd, 1) [33795] drivers/input/serio/i8042.c: 0e <- i8042 (interrupt, kbd, 1) [33887] drivers/input/serio/i8042.c: 8e <- i8042 (interrupt, kbd, 1) [33952] drivers/input/serio/i8042.c: 0e <- i8042 (interrupt, kbd, 1) [34042] drivers/input/serio/i8042.c: 8e <- i8042 (interrupt, kbd, 1) [34086] drivers/input/serio/i8042.c: 2d <- i8042 (interrupt, kbd, 1) [35022] drivers/input/serio/i8042.c: ad <- i8042 (interrupt, kbd, 1) [35246] drivers/input/serio/i8042.c: 14 <- i8042 (interrupt, kbd, 1) [35286] drivers/input/serio/i8042.c: 94 <- i8042 (interrupt, kbd, 1) [35351] drivers/input/serio/i8042.c: 1c <- i8042 (interrupt, kbd, 1) [35995]

#7 lore raw
In reply to Peter Williams
Quoted 13 lines · Peter Williams
Quoted 12 lines · Christian Guggenberger
Quoted 10 lines

With 2.6.4 I'm getting the following messages very early in the boot long before XFree86 is started:

Mar 18 16:05:31 mudlark kernel: atkbd.c: Unknown key released 
(translated set 2, code 0x7a on isa0060/serio0).
Mar 18 16:05:31 mudlark kernel: atkbd.c: This is an XFree86 bug. It 

shouldn't access hardware directly.

They are repeated 6 times and are NOT the result of any keys being pressed or released.

Quoted 6 lines
Quoted 3 lines

this has been fixed in XFree86 HEAD (4.4.99.1)
see changelog entry nr. 6 - the changes can easily be backported to 4.3.0, and work as expected on my box. (no noise anymore)

I repeat. These messages are appearing when XFree86 is NOT running so there is no way that it can be the cause of them.

I have the exact same behaviour on my machine.

(my 2 cents)

Regards

Signature · 6 lines
Emmanuel Fleury

Computer Science Department, |  Office: B1-201
Aalborg University,          |  Phone:  +45 96 35 72 23
Fredriks Bajersvej 7E,       |  Fax:    +45 98 15 98 89
9220 Aalborg East, Denmark   |  Email:  [email protected]
#8 lore raw
In reply to Christian Guggenberger
Quoted 3 lines · Christian Guggenberger
Quoted 3 lines

With 2.6.4 I'm getting the following messages very early in the boot long before XFree86 is started:

oops, must have overlook this sentence before - should get a coffee first. Well in that case, XFree86 should not have been blamed. sorry for the noise.

Quoted 12 lines
Quoted 7 lines
Mar 18 16:05:31 mudlark kernel: atkbd.c: Unknown key released 
(translated set 2, code 0x7a on isa0060/serio0).
Mar 18 16:05:31 mudlark kernel: atkbd.c: This is an XFree86 bug. It 

shouldn't access hardware directly.

They are repeated 6 times and are NOT the result of any keys being pressed or released.

this has been fixed in XFree86 HEAD (4.4.99.1)
see changelog entry nr. 6 - the changes can easily be backported to 4.3.0, and work as expected on my box. (no noise anymore)