Skip to contentSkip to conversation

Sound with noise since 2.6.5

DISCUSSION Adrian Almenar 3 participants 3 messages May 11, 2004 – May 12, 2004

lore
Share & tools
lore
#0 lore raw

Hi,

Since i installed 2.6.5 i cant get sound to work ok, i always have noise like a tv without a signal but the sound its there but with that noise. I tried with 2.6.6 but its the same, 2.6.4 doesnt have this problem.

Module: intel8x0

lspci -v reports:
0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801BA/BAM AC'97 Audio (rev 12)
Subsystem: GVC/BCM Advanced Research: Unknown device 2147
Flags: bus master, medium devsel, latency 0, IRQ 17
I/O ports at ec00
I/O ports at e800 [size=64]

dmesg says:

May 11 12:37:52 er-murazor kernel: intel8x0_measure_ac97_clock: measured 49263 usecs
May 11 12:37:52 er-murazor kernel: intel8x0: clocking to 48000

Im attaching my .config

Also i have alsa-lib 1.0.4.

Anything else you need please ask me i will gladly help on this issue.

Signature · 2 lines
Adrian Almenar
Conectium Limited
#1 lore raw

At Tue, 11 May 2004 14:45:40 -0400,

Quoted 22 lines · Adrian Almenar

[1 <text/plain; US-ASCII (7bit)>]
Hi,

Since i installed 2.6.5 i cant get sound to work ok, i always have noise like a tv without a signal but the sound its there but with that noise. I tried with 2.6.6 but its the same, 2.6.4 doesnt have this problem.

Module: intel8x0

lspci -v reports:
0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801BA/BAM AC'97 Audio (rev 12)
Subsystem: GVC/BCM Advanced Research: Unknown device 2147
Flags: bus master, medium devsel, latency 0, IRQ 17
I/O ports at ec00
I/O ports at e800 [size=64]

dmesg says:

May 11 12:37:52 er-murazor kernel: intel8x0_measure_ac97_clock: measured 49263 usecs
May 11 12:37:52 er-murazor kernel: intel8x0: clocking to 48000
Quoted 5 lines

Im attaching my .config

Also i have alsa-lib 1.0.4.

Anything else you need please ask me i will gladly help on this issue.

which ac97 codec chip?

a typical problem is 'IEC958 Input Monitor' is turned on. if you have such one, turn it off.

Takashi

#2 lore raw
Quoted 26 lines · Takashi Iwai

At Tue, 11 May 2004 14:45:40 -0400,

Quoted 24 lines · Adrian Almenar

[1 <text/plain; US-ASCII (7bit)>]
Hi,

Since i installed 2.6.5 i cant get sound to work ok, i always have noise like a tv without a signal but the sound its there but with that noise. I tried with 2.6.6 but its the same, 2.6.4 doesnt have this problem.

Module: intel8x0

lspci -v reports:
0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801BA/BAM AC'97 Audio (rev 12)
Subsystem: GVC/BCM Advanced Research: Unknown device 2147
Flags: bus master, medium devsel, latency 0, IRQ 17
I/O ports at ec00
I/O ports at e800 [size=64]

dmesg says:

May 11 12:37:52 er-murazor kernel: intel8x0_measure_ac97_clock: measured 49263 usecs
May 11 12:37:52 er-murazor kernel: intel8x0: clocking to 48000

Im attaching my .config

Quoted 10 lines
Quoted 3 lines

Also i have alsa-lib 1.0.4.

Anything else you need please ask me i will gladly help on this issue.

which ac97 codec chip?

a typical problem is 'IEC958 Input Monitor' is turned on. if you have such one, turn it off.

Hi

Pretty much the same issue. I have much the same setup software side, but its a Asus P4C800-E with a SoundMax AD1985 chip. If more is needed, let me know.

Thanks,

Signature · 1 line
Martin Schlemmer