Sound with noise since 2.6.5
Hi,
Since i installed 2.6.5 i cant get sound to work ok, i always have noise like a tv without a signal but the sound its there but with that noise. I tried with 2.6.6 but its the same, 2.6.4 doesnt have this problem.
Module: intel8x0
lspci -v reports:
0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801BA/BAM AC'97 Audio (rev 12)
Subsystem: GVC/BCM Advanced Research: Unknown device 2147
Flags: bus master, medium devsel, latency 0, IRQ 17
I/O ports at ec00
I/O ports at e800 [size=64]
dmesg says:
May 11 12:37:52 er-murazor kernel: intel8x0_measure_ac97_clock: measured 49263 usecs May 11 12:37:52 er-murazor kernel: intel8x0: clocking to 48000
Im attaching my .config
Also i have alsa-lib 1.0.4.
Anything else you need please ask me i will gladly help on this issue.
Signature · 2 lines
Adrian Almenar Conectium Limited
At Tue, 11 May 2004 14:45:40 -0400,
Quoted 22 lines · Adrian Almenar
[1 <text/plain; US-ASCII (7bit)>]
Hi,Since i installed 2.6.5 i cant get sound to work ok, i always have noise like a tv without a signal but the sound its there but with that noise. I tried with 2.6.6 but its the same, 2.6.4 doesnt have this problem.
Module: intel8x0
lspci -v reports:
0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801BA/BAM AC'97 Audio (rev 12)
Subsystem: GVC/BCM Advanced Research: Unknown device 2147
Flags: bus master, medium devsel, latency 0, IRQ 17
I/O ports at ec00
I/O ports at e800 [size=64]dmesg says:
May 11 12:37:52 er-murazor kernel: intel8x0_measure_ac97_clock: measured 49263 usecs May 11 12:37:52 er-murazor kernel: intel8x0: clocking to 48000
Quoted 5 lines
Im attaching my .config
Also i have alsa-lib 1.0.4.
Anything else you need please ask me i will gladly help on this issue.
which ac97 codec chip?
a typical problem is 'IEC958 Input Monitor' is turned on. if you have such one, turn it off.
Takashi
Quoted 26 lines · Takashi Iwai
At Tue, 11 May 2004 14:45:40 -0400,
Quoted 24 lines · Adrian Almenar
[1 <text/plain; US-ASCII (7bit)>]
Hi,Since i installed 2.6.5 i cant get sound to work ok, i always have noise like a tv without a signal but the sound its there but with that noise. I tried with 2.6.6 but its the same, 2.6.4 doesnt have this problem.
Module: intel8x0
lspci -v reports:
0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801BA/BAM AC'97 Audio (rev 12)
Subsystem: GVC/BCM Advanced Research: Unknown device 2147
Flags: bus master, medium devsel, latency 0, IRQ 17
I/O ports at ec00
I/O ports at e800 [size=64]dmesg says:
May 11 12:37:52 er-murazor kernel: intel8x0_measure_ac97_clock: measured 49263 usecs May 11 12:37:52 er-murazor kernel: intel8x0: clocking to 48000Im attaching my .config
Quoted 10 lines
Quoted 3 lines
Also i have alsa-lib 1.0.4.
Anything else you need please ask me i will gladly help on this issue.
which ac97 codec chip?
a typical problem is 'IEC958 Input Monitor' is turned on. if you have such one, turn it off.
Hi
Pretty much the same issue. I have much the same setup software side, but its a Asus P4C800-E with a SoundMax AD1985 chip. If more is needed, let me know.
Thanks,
Signature · 1 line
Martin Schlemmer