add dwc2 support for px30
Subsystems (3)
Heiko Stuebner
maintainercover add dwc2 support for px30
This is split out from the series adding the px30 support, due to the dwc2 binding change not having landed yet in a maintainer tree.
The Acked binding change should go through some usb tree, while I'll pick up the dts changes once that has happened.
The binding itself is unchanged.
Heiko Stuebner (2):
arm64: dts: rockchip: add dwc2 otg controller on px30
arm64: dts: rockchip: enable dwc2-based otg controller on px30-evb
Liang Chen (1):
dt-bindings: usb: dwc2: add description for px30
Documentation/devicetree/bindings/usb/dwc2.txt | 1 + arch/arm64/boot/dts/rockchip/px30-evb.dts | 4 ++++ arch/arm64/boot/dts/rockchip/px30.dtsi | 16 ++++++++++++++++ 3 files changed, 21 insertions(+)
Signature · 1 line
2.17.0
Heiko Stuebner
maintainerPATCH 1/3 dt-bindings: usb: dwc2: add description for px30
From: Liang Chen <[email protected]>
This patch adds the compatible of dwc2 for PX30 SoCs.
---
unchanged from it being part of the general px30 series
Documentation/devicetree/bindings/usb/dwc2.txt | 1 + 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/usb/dwc2.txt +1 -0
@@ -6,6 +6,7 @@ Required properties: - brcm,bcm2835-usb: The DWC2 USB controller instance in the BCM2835 SoC. - hisilicon,hi6220-usb: The DWC2 USB controller instance in the hi6220 SoC. - rockchip,rk3066-usb: The DWC2 USB controller instance in the rk3066 Soc; + - "rockchip,px30-usb", "rockchip,rk3066-usb", "snps,dwc2": for px30 Soc; - "rockchip,rk3188-usb", "rockchip,rk3066-usb", "snps,dwc2": for rk3188 Soc; - "rockchip,rk3288-usb", "rockchip,rk3066-usb", "snps,dwc2": for rk3288 Soc; - "lantiq,arx100-usb": The DWC2 USB controller instance in Lantiq ARX SoCs;
Signature · 1 line
2.17.0
Heiko Stuebner
maintainerPATCH 1/3 dt-bindings: usb: dwc2: add description for px30
Hi Greg, Felipe,
Am Donnerstag, 2. August 2018, 15:01:31 CEST schrieb Heiko Stuebner:
Quoted 7 lines
From: Liang Chen <[email protected]>
This patch adds the compatible of dwc2 for PX30 SoCs.
Signed-off-by Liang Chen <[email protected]>Acked-by Rob Herring <[email protected]>Signed-off-by Heiko Stuebner <[email protected]>
Do you want to pick that patch through one of the usb trees, or should I just apply it with the arm64 devicetree-patches?
Thanks
Heiko
Quoted 18 lines
unchanged from it being part of the general px30 series
Documentation/devicetree/bindings/usb/dwc2.txt | 1 + 1 file changed, 1 insertion(+)Documentation/devicetree/bindings/usb/dwc2.txt +1
-0@@ -6,6 +6,7 @@ Required properties: - brcm,bcm2835-usb: The DWC2 USB controller instance in the BCM2835 SoC. - hisilicon,hi6220-usb: The DWC2 USB controller instance in the hi6220 SoC. - rockchip,rk3066-usb: The DWC2 USB controller instance in the rk3066 Soc; + - "rockchip,px30-usb", "rockchip,rk3066-usb", "snps,dwc2": for px30 Soc; - "rockchip,rk3188-usb", "rockchip,rk3066-usb", "snps,dwc2": for rk3188 Soc; - "rockchip,rk3288-usb", "rockchip,rk3066-usb", "snps,dwc2": for rk3288 Soc; - "lantiq,arx100-usb": The DWC2 USB controller instance in Lantiq ARX SoCs;
Heiko Stuebner
maintainerPATCH 2/3 arm64: dts: rockchip: add dwc2 otg controller on px30
In reply to Heiko StuebnerAdd the node for the dwc2-based otg controller on the px30 soc.
--- arch/arm64/boot/dts/rockchip/px30.dtsi | 16 ++++++++++++++++ 1 file changed, 16 insertions(+)
arch/arm64/boot/dts/rockchip/px30.dtsi +16 -0
@@ -702,6 +702,22 @@ <100000000>, <200000000>; }; + usb20_otg: usb at ff300000 { + compatible = "rockchip,px30-usb", "rockchip,rk3066-usb", + "snps,dwc2"; + reg = <0x0 0xff300000 0x0 0x40000>; + interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_OTG>; + clock-names = "otg"; + dr_mode = "otg"; + g-np-tx-fifo-size = <16>; + g-rx-fifo-size = <280>; + g-tx-fifo-size = <256 128 128 64 32 16>; + g-use-dma; + power-domains = <&power PX30_PD_USB>; + status = "disabled"; + }; + usb_host0_ehci: usb at ff340000 { compatible = "generic-ehci"; reg = <0x0 0xff340000 0x0 0x10000>;
Signature · 1 line
2.17.0
Heiko Stuebner
maintainerPATCH 3/3 arm64: dts: rockchip: enable dwc2-based otg controller on px30-evb
In reply to Heiko StuebnerEnable the newly added controller on the px30 evaluation board.
--- arch/arm64/boot/dts/rockchip/px30-evb.dts | 4 ++++ 1 file changed, 4 insertions(+)
arch/arm64/boot/dts/rockchip/px30-evb.dts +4 -0
@@ -206,6 +206,10 @@ status = "okay"; }; +&usb20_otg { + status = "okay"; +}; + &usb_host0_ehci { status = "okay"; };
Signature · 1 line
2.17.0
Heiko Stuebner
maintainercover add dwc2 support for px30
In reply to Heiko StuebnerAm Donnerstag, 2. August 2018, 15:01:30 CEST schrieb Heiko Stuebner:
Quoted 9 lines
This is split out from the series adding the px30 support, due to the dwc2 binding change not having landed yet in a maintainer tree.
The Acked binding change should go through some usb tree, while I'll pick up the dts changes once that has happened.
The binding itself is unchanged.
Quoted 6 lines
Heiko Stuebner (2):
arm64: dts: rockchip: add dwc2 otg controller on px30
arm64: dts: rockchip: enable dwc2-based otg controller on px30-evbLiang Chen (1):
dt-bindings: usb: dwc2: add description for px30
applied all 3 patches for 4.20 now.