Skip to contentSkip to conversation

- IBM TouchPad support added? Which patch is this?

2.6.8.1-mm1 Shawn Starr 4 participants 12 messages Aug 17, 2004 – Sep 17, 2004

lore
Share & tools
lore
#0 lore raw

mice: PS/2 mouse device common for all mice
input: IBM PC110 TouchPad at 0x15e0 irq 10 <----------------------------- This is new
input: AT Translated Set 2 keyboard on isa0060/serio0
Synaptics Touchpad, model: 1
Firmware: 5.9
Sensor: 44
new absolute packet format
Touchpad has extended capability bits
-> multifinger detection
-> palm detection
-> pass-through port
input: SynPS/2 Synaptics TouchPad on isa0060/serio1
serio: Synaptics pass-through port atisa0060/serio1/input0

Which patch is this? its nice but I don't see any ability (yet) to control its sensitivity (especially in KDE!). Upon using 2.6.8-rc4-bk2 there was no such device (you could not touch the pad as a button).

Shawn.

#1 lore raw

Re: [2.6.8.1-mm1][input] - IBM TouchPad support added? Which patch is this? - Found it ignore

Quoted 14 lines · Shawn Starr

mice: PS/2 mouse device common for all mice
input: IBM PC110 TouchPad at 0x15e0 irq 10 <----------------------------- This is new input: AT Translated Set 2 keyboard on isa0060/serio0 Synaptics Touchpad, model: 1
Firmware: 5.9
Sensor: 44
new absolute packet format
Touchpad has extended capability bits
-> multifinger detection
-> palm detection
-> pass-through port
input: SynPS/2 Synaptics TouchPad on isa0060/serio1
serio: Synaptics pass-through port atisa0060/serio1/input0

Quoted 5 lines

Which patch is this? its nice but I don't see any ability (yet) to control its sensitivity (especially in KDE!). Upon using 2.6.8-rc4-bk2 there was no such device (you could not touch the pad as a button).

Shawn.

new device driver to enable the IBM Multiport Serial Adapter

I found it, its a serial device.

Shawn.

#2 lore raw

[2.6.8.1-mm1][input] - IBM TouchPad support added? Which patch is this? - Unsure still

In reply to Shawn Starr

Sorry, I stand corrected. I don't know where this patch is added from which enables the touchpad to act as a 'button press'.

Shawn.

Quoted 19 lines · Shawn Starr

mice: PS/2 mouse device common for all mice
input: IBM PC110 TouchPad at 0x15e0 irq 10 <----------------------------- This is new input: AT Translated Set 2 keyboard on isa0060/serio0 Synaptics Touchpad, model: 1
Firmware: 5.9
Sensor: 44
new absolute packet format
Touchpad has extended capability bits
-> multifinger detection
-> palm detection
-> pass-through port
input: SynPS/2 Synaptics TouchPad on isa0060/serio1
serio: Synaptics pass-through port atisa0060/serio1/input0

Which patch is this? its nice but I don't see any ability (yet) to control its sensitivity (especially in KDE!). Upon using 2.6.8-rc4-bk2 there was no such device (you could not touch the pad as a button).

Shawn.

#3 lore raw

Re: [2.6.8.1-mm1][input] - IBM TouchPad support added? Which patch is this? - Unsure still

Quoted 3 lines · Shawn Starr

Sorry, I stand corrected. I don't know where this patch is added from which enables the touchpad to act as a 'button press'.

mousedev now does tap emulation for touchpads working in absolute mode (Synaptics) so you don't need to use psmouse.proto= parameter to force it in PS/2 compatibility mode. Use mousedev.tap_time= option to control it.

The patch is only in -mm at the moment.

Signature · 1 line
Dmitry
#4 lore raw

Re: [2.6.8.1-mm1][input] - IBM TouchPad support added? Which patch is this? - Unsure still

Great, it works

On top of that the X driver for the Synaptics device along with qsynaptics (a userland GUI tool) all works fine.

Good stuff!

Shawn.

Quoted 10 lines · Dmitry Torokhov
Quoted 2 lines · Shawn Starr

Sorry, I stand corrected. I don't know where this patch is added from which enables the touchpad to act as a 'button press'.

mousedev now does tap emulation for touchpads working in absolute mode (Synaptics) so you don't need to use psmouse.proto= parameter to force it in PS/2 compatibility mode. Use mousedev.tap_time= option to control it.

The patch is only in -mm at the moment.

#5 lore raw

Re: [2.6.8.1-mm1][input] - IBM TouchPad support added? Which patch is this? - Unsure still

In reply to Dmitry Torokhov
Quoted 6 lines · Dmitry Torokhov
Quoted 2 lines · Shawn Starr

Sorry, I stand corrected. I don't know where this patch is added from which enables the touchpad to act as a 'button press'.

Quoted 6 lines

mousedev now does tap emulation for touchpads working in absolute mode (Synaptics) so you don't need to use psmouse.proto= parameter to force it in PS/2 compatibility mode. Use mousedev.tap_time= option to control it.

The patch is only in -mm at the moment.

Can that patch be downloaded somewhere to patch against 2.6.8.1? I don't have any tapping support for my synaptic touchpad on my compaq laptop after switching from 2.4 to 2.6.
It seems that most of the patches at http://www.geocities.com/dt_or/input/2_6_7/
are already in 2.6.8.1: Just the tapping stuff seems to be missing. And I can't extract your patch from the 2.6.9-rc1-mm2 stuff, because it seems to be mixed with some other patches there.
Is there a sole version of this patch fir 2.6.8.1 somewhere?

cu,
Frank

Signature · 4 lines
Dipl.-Inform. Frank Steiner   Web:  http://www.bio.ifi.lmu.de/~steiner/
Lehrstuhl f. Bioinformatik    Mail: http://www.bio.ifi.lmu.de/~steiner/m/
LMU, Amalienstr. 17           Phone: +49 89 2180-4049
80333 Muenchen, Germany       Fax:   +49 89 2180-99-4049
#6 lore raw

Re: [2.6.8.1-mm1][input] - IBM TouchPad support added? Which patch is this? - Unsure still

Quoted 15 lines · Frank Steiner
Quoted 7 lines · Dmitry Torokhov
Quoted 3 lines · Shawn Starr

Sorry, I stand corrected. I don't know where this patch is added from which enables the touchpad to act as a 'button press'.

Quoted 6 lines

mousedev now does tap emulation for touchpads working in absolute mode (Synaptics) so you don't need to use psmouse.proto= parameter to force it in PS/2 compatibility mode. Use mousedev.tap_time= option to control it.

The patch is only in -mm at the moment.

Quoted 9 lines

Can that patch be downloaded somewhere to patch against 2.6.8.1? I don't have any tapping support for my synaptic touchpad on my compaq laptop after switching from 2.4 to 2.6.
It seems that most of the patches at http://www.geocities.com/dt_or/input/2_6_7/
are already in 2.6.8.1: Just the tapping stuff seems to be missing. And I can't extract your patch from the 2.6.9-rc1-mm2 stuff, because it seems to be mixed with some other patches there.
Is there a sole version of this patch fir 2.6.8.1 somewhere?

No, I don't think I have one... If you are using BitKeeper, yo could just do:

bk pull bk://dtor.bkbits.net/input

But have you tried installing XFree86/XOrg Synaptics driver
(http://w1.894.telia.com/~u89404340/touchpad/index.html)?
It does support tapping just fine...

Signature · 1 line
Dmitry
#7 lore raw

Re: [2.6.8.1-mm1][input] - IBM TouchPad support added? Which patch is this? - Unsure still

Quoted 3 lines · Dmitry Torokhov

No, I don't think I have one... If you are using BitKeeper, yo could just do:

bk pull bk://dtor.bkbits.net/input

I will try that (not having bitkeeper yet, but I planned to do install for some time... You always need a reason to be pushed :-))

Quoted 4 lines

But have you tried installing XFree86/XOrg Synaptics driver
(http://w1.894.telia.com/~u89404340/touchpad/index.html)?
It does support tapping just fine...

I will try. I had already looked at the page, but it says "If you use a 2.6 linux kernel, you might want to try Dmitry Torokhov's kernel patches." so that's looked at your patches first :-)

I will try both your proposals and report sucess.
Thanks!

cu,
Frank

Signature · 4 lines
Dipl.-Inform. Frank Steiner   Web:  http://www.bio.ifi.lmu.de/~steiner/
Lehrstuhl f. Bioinformatik    Mail: http://www.bio.ifi.lmu.de/~steiner/m/
LMU, Amalienstr. 17           Phone: +49 89 2180-4049
80333 Muenchen, Germany       Fax:   +49 89 2180-99-4049
#8 lore raw

Re: [2.6.8.1-mm1][input] - IBM TouchPad support added? Which patch is this? - Unsure still

Quoted 3 lines · Frank Steiner
Quoted 3 lines

But have you tried installing XFree86/XOrg Synaptics driver
(http://w1.894.telia.com/~u89404340/touchpad/index.html)?
It does support tapping just fine...

Yes, that works, as well as the gpm version I have (I just had to detect the evdev option :-)).

And I also had success with the psmouse.proto=bare option which I just checked to see if it works...

cu,
Frank

Signature · 5 lines
Dipl.-Inform. Frank Steiner   Web:  http://www.bio.ifi.lmu.de/~steiner/
Lehrstuhl f. Bioinformatik    Mail: http://www.bio.ifi.lmu.de/~steiner/m/
LMU, Amalienstr. 17           Phone: +49 89 2180-4049
80333 Muenchen, Germany       Fax:   +49 89 2180-99-4049
* Rekursion kann man erst verstehen, wenn man Rekursion verstanden hat. *
#9 lore raw

[INPUT] mousedev touchpad functionality additions for inclusion into 2.6.9?

In reply to Dmitry Torokhov

Any change of this going into mainline? I'm using this with 2.6.9-rc2-bk2 with no issues.

Shawn.

Quoted 10 lines · Dmitry Torokhov
Quoted 2 lines · Shawn Starr

Sorry, I stand corrected. I don't know where this patch is added from which enables the touchpad to act as a 'button press'.

mousedev now does tap emulation for touchpads working in absolute mode (Synaptics) so you don't need to use psmouse.proto= parameter to force it in PS/2 compatibility mode. Use mousedev.tap_time= option to control it.

The patch is only in -mm at the moment.

#10 lore raw

Re: [INPUT] mousedev touchpad functionality additions for inclusion into 2.6.9?

Quoted 3 lines · Shawn Starr

Any change of this going into mainline? I'm using this with 2.6.9-rc2-bk2 with no issues.

It has just been merged.

Signature · 1 line
Dmitry
#11 lore raw

Re: [2.6.8.1-mm1][input] - IBM TouchPad support added? Which patch is this? - Unsure still

In reply to Shawn Starr
Quoted 3 lines · Shawn Starr
Quoted 3 lines

mice: PS/2 mouse device common for all mice
input: IBM PC110 TouchPad at 0x15e0 irq 10 <----------------------------- This is new input: AT Translated Set 2 keyboard on isa0060/serio0

You enabled the IBM PC110 driver. Thats a driver for a specifc touchpad device on IBM PC110 palmtop pcs - nothing to do with it 8)