- IBM TouchPad support added? Which patch is this?
mice: PS/2 mouse device common for all mice
input: IBM PC110 TouchPad at 0x15e0 irq 10 <----------------------------- This is new
input: AT Translated Set 2 keyboard on isa0060/serio0
Synaptics Touchpad, model: 1
Firmware: 5.9
Sensor: 44
new absolute packet format
Touchpad has extended capability bits
-> multifinger detection
-> palm detection
-> pass-through port
input: SynPS/2 Synaptics TouchPad on isa0060/serio1
serio: Synaptics pass-through port atisa0060/serio1/input0
Which patch is this? its nice but I don't see any ability (yet) to control its sensitivity (especially in KDE!). Upon using 2.6.8-rc4-bk2 there was no such device (you could not touch the pad as a button).
Shawn.
Re: [2.6.8.1-mm1][input] - IBM TouchPad support added? Which patch is this? - Found it ignore
Quoted 14 lines · Shawn Starr
mice: PS/2 mouse device common for all mice
input: IBM PC110 TouchPad at0x15e0irq 10 <----------------------------- This is new input: AT Translated Set 2 keyboard on isa0060/serio0 Synaptics Touchpad, model: 1
Firmware: 5.9
Sensor: 44
new absolute packet format
Touchpad has extended capability bits
-> multifinger detection
-> palm detection
-> pass-through port
input: SynPS/2 Synaptics TouchPad on isa0060/serio1
serio: Synaptics pass-through port atisa0060/serio1/input0
Quoted 5 lines
Which patch is this? its nice but I don't see any ability (yet) to control its sensitivity (especially in KDE!). Upon using 2.6.8-rc4-bk2 there was no such device (you could not touch the pad as a button).
Shawn.
new device driver to enable the IBM Multiport Serial Adapter
I found it, its a serial device.
Shawn.
[2.6.8.1-mm1][input] - IBM TouchPad support added? Which patch is this? - Unsure still
In reply to Shawn StarrSorry, I stand corrected. I don't know where this patch is added from which enables the touchpad to act as a 'button press'.
Shawn.
Quoted 19 lines · Shawn Starr
mice: PS/2 mouse device common for all mice
input: IBM PC110 TouchPad at0x15e0irq 10 <----------------------------- This is new input: AT Translated Set 2 keyboard on isa0060/serio0 Synaptics Touchpad, model: 1
Firmware: 5.9
Sensor: 44
new absolute packet format
Touchpad has extended capability bits
-> multifinger detection
-> palm detection
-> pass-through port
input: SynPS/2 Synaptics TouchPad on isa0060/serio1
serio: Synaptics pass-through port atisa0060/serio1/input0Which patch is this? its nice but I don't see any ability (yet) to control its sensitivity (especially in KDE!). Upon using 2.6.8-rc4-bk2 there was no such device (you could not touch the pad as a button).
Shawn.
Re: [2.6.8.1-mm1][input] - IBM TouchPad support added? Which patch is this? - Unsure still
Quoted 3 lines · Shawn Starr
Sorry, I stand corrected. I don't know where this patch is added from which enables the touchpad to act as a 'button press'.
mousedev now does tap emulation for touchpads working in absolute mode (Synaptics) so you don't need to use psmouse.proto= parameter to force it in PS/2 compatibility mode. Use mousedev.tap_time= option to control it.
The patch is only in -mm at the moment.
Signature · 1 line
Dmitry
Re: [2.6.8.1-mm1][input] - IBM TouchPad support added? Which patch is this? - Unsure still
Great, it works
On top of that the X driver for the Synaptics device along with qsynaptics (a userland GUI tool) all works fine.
Good stuff!
Shawn.
Quoted 10 lines · Dmitry Torokhov
Quoted 2 lines · Shawn Starr
Sorry, I stand corrected. I don't know where this patch is added from which enables the touchpad to act as a 'button press'.
mousedev now does tap emulation for touchpads working in absolute mode (Synaptics) so you don't need to use psmouse.proto= parameter to force it in PS/2 compatibility mode. Use mousedev.tap_time= option to control it.
The patch is only in -mm at the moment.
Re: [2.6.8.1-mm1][input] - IBM TouchPad support added? Which patch is this? - Unsure still
In reply to Dmitry TorokhovQuoted 6 lines · Dmitry Torokhov
Quoted 2 lines · Shawn Starr
Sorry, I stand corrected. I don't know where this patch is added from which enables the touchpad to act as a 'button press'.
Quoted 6 lines
mousedev now does tap emulation for touchpads working in absolute mode (Synaptics) so you don't need to use psmouse.proto= parameter to force it in PS/2 compatibility mode. Use mousedev.tap_time= option to control it.
The patch is only in -mm at the moment.
Can that patch be downloaded somewhere to patch against 2.6.8.1? I don't have any tapping support for my synaptic touchpad on my compaq laptop after switching from 2.4 to 2.6.
It seems that most of the patches at http://www.geocities.com/dt_or/input/2_6_7/
are already in 2.6.8.1: Just the tapping stuff seems to be missing. And I can't extract your patch from the 2.6.9-rc1-mm2 stuff, because it seems to be mixed with some other patches there.
Is there a sole version of this patch fir 2.6.8.1 somewhere?
cu,
Frank
Signature · 4 lines
Dipl.-Inform. Frank Steiner Web: http://www.bio.ifi.lmu.de/~steiner/ Lehrstuhl f. Bioinformatik Mail: http://www.bio.ifi.lmu.de/~steiner/m/ LMU, Amalienstr. 17 Phone: +49 89 2180-4049 80333 Muenchen, Germany Fax: +49 89 2180-99-4049
Re: [2.6.8.1-mm1][input] - IBM TouchPad support added? Which patch is this? - Unsure still
Quoted 15 lines · Frank Steiner
Quoted 7 lines · Dmitry Torokhov
Quoted 3 lines · Shawn Starr
Sorry, I stand corrected. I don't know where this patch is added from which enables the touchpad to act as a 'button press'.
Quoted 6 lines
mousedev now does tap emulation for touchpads working in absolute mode (Synaptics) so you don't need to use psmouse.proto= parameter to force it in PS/2 compatibility mode. Use mousedev.tap_time= option to control it.
The patch is only in -mm at the moment.
Quoted 9 lines
Can that patch be downloaded somewhere to patch against 2.6.8.1? I don't have any tapping support for my synaptic touchpad on my compaq laptop after switching from 2.4 to 2.6.
It seems that most of the patches at http://www.geocities.com/dt_or/input/2_6_7/
are already in 2.6.8.1: Just the tapping stuff seems to be missing. And I can't extract your patch from the 2.6.9-rc1-mm2 stuff, because it seems to be mixed with some other patches there.
Is there a sole version of this patch fir 2.6.8.1 somewhere?
No, I don't think I have one... If you are using BitKeeper, yo could just do:
bk pull bk://dtor.bkbits.net/input
But have you tried installing XFree86/XOrg Synaptics driver
(http://w1.894.telia.com/~u89404340/touchpad/index.html)?
It does support tapping just fine...
Signature · 1 line
Dmitry
Re: [2.6.8.1-mm1][input] - IBM TouchPad support added? Which patch is this? - Unsure still
Quoted 3 lines · Dmitry Torokhov
No, I don't think I have one... If you are using BitKeeper, yo could just do:
bk pull bk://dtor.bkbits.net/input
I will try that (not having bitkeeper yet, but I planned to do install for some time... You always need a reason to be pushed :-))
Quoted 4 lines
But have you tried installing XFree86/XOrg Synaptics driver
(http://w1.894.telia.com/~u89404340/touchpad/index.html)?
It does support tapping just fine...
I will try. I had already looked at the page, but it says "If you use a 2.6 linux kernel, you might want to try Dmitry Torokhov's kernel patches." so that's looked at your patches first :-)
I will try both your proposals and report sucess.
Thanks!
cu,
Frank
Signature · 4 lines
Dipl.-Inform. Frank Steiner Web: http://www.bio.ifi.lmu.de/~steiner/ Lehrstuhl f. Bioinformatik Mail: http://www.bio.ifi.lmu.de/~steiner/m/ LMU, Amalienstr. 17 Phone: +49 89 2180-4049 80333 Muenchen, Germany Fax: +49 89 2180-99-4049
Re: [2.6.8.1-mm1][input] - IBM TouchPad support added? Which patch is this? - Unsure still
Quoted 3 lines · Frank Steiner
Quoted 3 lines
But have you tried installing XFree86/XOrg Synaptics driver
(http://w1.894.telia.com/~u89404340/touchpad/index.html)?
It does support tapping just fine...
Yes, that works, as well as the gpm version I have (I just had to detect the evdev option :-)).
And I also had success with the psmouse.proto=bare option which I just checked to see if it works...
cu,
Frank
Signature · 5 lines
Dipl.-Inform. Frank Steiner Web: http://www.bio.ifi.lmu.de/~steiner/ Lehrstuhl f. Bioinformatik Mail: http://www.bio.ifi.lmu.de/~steiner/m/ LMU, Amalienstr. 17 Phone: +49 89 2180-4049 80333 Muenchen, Germany Fax: +49 89 2180-99-4049 * Rekursion kann man erst verstehen, wenn man Rekursion verstanden hat. *
[INPUT] mousedev touchpad functionality additions for inclusion into 2.6.9?
In reply to Dmitry TorokhovAny change of this going into mainline? I'm using this with 2.6.9-rc2-bk2 with no issues.
Shawn.
Quoted 10 lines · Dmitry Torokhov
Quoted 2 lines · Shawn Starr
Sorry, I stand corrected. I don't know where this patch is added from which enables the touchpad to act as a 'button press'.
mousedev now does tap emulation for touchpads working in absolute mode (Synaptics) so you don't need to use psmouse.proto= parameter to force it in PS/2 compatibility mode. Use mousedev.tap_time= option to control it.
The patch is only in -mm at the moment.
Re: [INPUT] mousedev touchpad functionality additions for inclusion into 2.6.9?
Quoted 3 lines · Shawn Starr
Any change of this going into mainline? I'm using this with 2.6.9-rc2-bk2 with no issues.
It has just been merged.
Signature · 1 line
Dmitry
Re: [2.6.8.1-mm1][input] - IBM TouchPad support added? Which patch is this? - Unsure still
In reply to Shawn StarrQuoted 3 lines · Shawn Starr
Quoted 3 lines
mice: PS/2 mouse device common for all mice
input: IBM PC110 TouchPad at0x15e0irq 10 <----------------------------- This is new input: AT Translated Set 2 keyboard on isa0060/serio0
You enabled the IBM PC110 driver. Thats a driver for a specifc touchpad device on IBM PC110 palmtop pcs - nothing to do with it 8)