Skip to contentSkip to conversation

Firmware loader gone bogus?

2.6.10-rc1-mm2 Shawn Starr 4 participants 6 messages Oct 31, 2004 – Nov 1, 2004

lore
Share & tools
lore
#0 lore raw

Yeah I noticed my ipw2200 firmware broke in 2.6.10-rc1-bk5

Does 2.6.10-rc1 non-bk snapshots work for you?

Shawn.

Quoted 27 lines
List:       linux-kernel
Subject:    [2.6.10-rc1-mm2] Firmware loader gone bogus?
From:       Christian Axelsson <smiler () lanil ! mine ! nu>
Date:       2004-10-31 19:51:28
Message-ID: <41854240.3050909 () lanil ! mine ! nu>

[Download message RAW]

Ive upgraded from 2.6.9-rc4-mm1 to 2.6.10-rc1-mm2 and now the firmware loader seems broken. I have an internal wlan-adapter that runs the ipw2200-driver and I get errors when trying to load the firmware. Then I tried my prism54-based card and got the following errors in dmesg:

Loaded prism54 driver, version 1.2
PCI: Enabling device 0000:03:00.0 (0000 -> 0002)
ACPI: PCI interrupt 0000:03:00.0[A] -> GSI 6 (level, low) -> IRQ 6
eth1: resetting device...
eth1: uploading firmware...
prism54: request_firmware() failed for 'isl3890'
eth1: could not upload firmware ('isl3890')
eth1: islpci_reset: failure

The firmware files are in place and both these cards with drivers have worked fine before. Config attached

Signature · 2 lines
Regards,
Christian
#1 lore raw

Am Sonntag, 31. Oktober 2004 22:27 schrieb Shawn Starr:

Quoted 3 lines

Yeah I noticed my ipw2200 firmware broke in 2.6.10-rc1-bk5

Does 2.6.10-rc1 non-bk snapshots work for you?

Which script do you use to load the firmware?

Regards
Oliver

#2 lore raw

Hi Oliver,

Quoted 5 lines
Quoted 3 lines

Yeah I noticed my ipw2200 firmware broke in 2.6.10-rc1-bk5

Does 2.6.10-rc1 non-bk snapshots work for you?

Which script do you use to load the firmware?

it is not a script problem. Look at the LKML from Saturday.

Regards

Marcel

#3 lore raw
In reply to Oliver Neukum

0.0.20040329-1 Linux Hotplug Scripts

hotplug_20040329 from Debian unstable/testing.

Using 2.6.9-rc4-xx I had no problems with loading the firmware. As in my previous emails on the subject, I posted some debug that from the firmware module and kobject_hotplug, and from there I couldn't see why it was failing.

I know lots of changes have been made to hotplug in the kernel recently.

Shawn.

Quoted 9 lines · Oliver Neukum

Am Sonntag, 31. Oktober 2004 22:27 schrieb Shawn Starr:

Quoted 3 lines

Yeah I noticed my ipw2200 firmware broke in 2.6.10-rc1-bk5

Does 2.6.10-rc1 non-bk snapshots work for you?

Which script do you use to load the firmware?

Regards
Oliver

#4 lore raw

See: http://marc.theaimsgroup.com/?l=linux-kernel&m=109919609211671&w=2

This will appear in the next -bk automated snapshot soon.

That should fix everyone's firmware load failures.

Shawn.

Quoted 33 lines · Shawn Starr

0.0.20040329-1 Linux Hotplug Scripts

hotplug_20040329 from Debian unstable/testing.

Using 2.6.9-rc4-xx I had no problems with loading the firmware. As in my previous emails on the subject, I posted some debug that from the firmware module and kobject_hotplug, and from there I couldn't see why it was failing.

I know lots of changes have been made to hotplug in the kernel recently.

Shawn.

Quoted 9 lines · Oliver Neukum

Am Sonntag, 31. Oktober 2004 22:27 schrieb Shawn Starr:

Quoted 3 lines

Yeah I noticed my ipw2200 firmware broke in 2.6.10-rc1-bk5

Does 2.6.10-rc1 non-bk snapshots work for you?

Which script do you use to load the firmware?

Regards
Oliver

-------------------------------------------------------
This SF.Net email is sponsored by:
Sybase ASE Linux Express Edition - download now for FREE LinuxWorld Reader's Choice Award Winner for best database on Linux.
http://ads.osdn.com/?ad_id=5588&alloc_id=12065&op=click
_______________________________________________
ipw2100-devel mailing list [email protected]
https://lists.sourceforge.net/lists/listinfo/ipw2100-devel

#5 lore raw

Yep, this fixes it

Quoted 51 lines · Shawn Starr

See: http://marc.theaimsgroup.com/?l=linux-kernel&m=109919609211671&w=2

This will appear in the next -bk automated snapshot soon.

That should fix everyone's firmware load failures.

Shawn.

Quoted 26 lines · Shawn Starr

0.0.20040329-1 Linux Hotplug Scripts

hotplug_20040329 from Debian unstable/testing.

Using 2.6.9-rc4-xx I had no problems with loading the firmware. As in my previous emails on the subject, I posted some debug that from the firmware module and kobject_hotplug, and from there I couldn't see why it was failing.

I know lots of changes have been made to hotplug in the kernel recently.

Shawn.

Quoted 10 lines · Oliver Neukum

Am Sonntag, 31. Oktober 2004 22:27 schrieb Shawn Starr:

Quoted 3 lines

Yeah I noticed my ipw2200 firmware broke in 2.6.10-rc1-bk5

Does 2.6.10-rc1 non-bk snapshots work for you?

Which script do you use to load the firmware?

Regards
Oliver

Quoted 9 lines

-------------------------------------------------------
This SF.Net email is sponsored by:
Sybase ASE Linux Express Edition - download now for FREE LinuxWorld Reader's Choice Award Winner for best database on Linux.
http://ads.osdn.com/?ad_id=5588&alloc_id=12065&op=click
_______________________________________________
ipw2100-devel mailing list [email protected]
https://lists.sourceforge.net/lists/listinfo/ipw2100-devel

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Signature · 2 lines
Regards,
Christian