Firmware loader gone bogus?
Yeah I noticed my ipw2200 firmware broke in 2.6.10-rc1-bk5
Does 2.6.10-rc1 non-bk snapshots work for you?
Shawn.
Quoted 27 lines
List: linux-kernel Subject: [2.6.10-rc1-mm2] Firmware loader gone bogus? From: Christian Axelsson <smiler () lanil ! mine ! nu> Date: 2004-10-31 19:51:28 Message-ID: <41854240.3050909 () lanil ! mine ! nu>[Download message RAW]
Ive upgraded from 2.6.9-rc4-mm1 to 2.6.10-rc1-mm2 and now the firmware loader seems broken. I have an internal wlan-adapter that runs the ipw2200-driver and I get errors when trying to load the firmware. Then I tried my prism54-based card and got the following errors in dmesg:
Loaded prism54 driver, version 1.2
PCI: Enabling device 0000:03:00.0 (0000 -> 0002)
ACPI: PCI interrupt 0000:03:00.0[A] -> GSI 6 (level, low) -> IRQ 6
eth1: resetting device...
eth1: uploading firmware...
prism54:request_firmware()failed for 'isl3890'
eth1: could not upload firmware ('isl3890')
eth1:islpci_reset: failureThe firmware files are in place and both these cards with drivers have worked fine before. Config attached
Signature · 2 lines
Regards, Christian
Am Sonntag, 31. Oktober 2004 22:27 schrieb Shawn Starr:
Quoted 3 lines
Yeah I noticed my ipw2200 firmware broke in 2.6.10-rc1-bk5
Does 2.6.10-rc1 non-bk snapshots work for you?
Which script do you use to load the firmware?
Regards
Oliver
Hi Oliver,
Quoted 5 lines
Quoted 3 lines
Yeah I noticed my ipw2200 firmware broke in 2.6.10-rc1-bk5
Does 2.6.10-rc1 non-bk snapshots work for you?
Which script do you use to load the firmware?
it is not a script problem. Look at the LKML from Saturday.
Regards
Marcel
0.0.20040329-1 Linux Hotplug Scripts
hotplug_20040329 from Debian unstable/testing.
Using 2.6.9-rc4-xx I had no problems with loading the firmware. As in my previous emails on the subject, I posted some debug that from the firmware module and kobject_hotplug, and from there I couldn't see why it was failing.
I know lots of changes have been made to hotplug in the kernel recently.
Shawn.
Quoted 9 lines · Oliver Neukum
Am Sonntag, 31. Oktober 2004 22:27 schrieb Shawn Starr:
Quoted 3 lines
Yeah I noticed my ipw2200 firmware broke in 2.6.10-rc1-bk5
Does 2.6.10-rc1 non-bk snapshots work for you?
Which script do you use to load the firmware?
Regards
Oliver
See: http://marc.theaimsgroup.com/?l=linux-kernel&m=109919609211671&w=2
This will appear in the next -bk automated snapshot soon.
That should fix everyone's firmware load failures.
Shawn.
Quoted 33 lines · Shawn Starr
0.0.20040329-1 Linux Hotplug Scripts
hotplug_20040329from Debian unstable/testing.Using 2.6.9-rc4-xx I had no problems with loading the firmware. As in my previous emails on the subject, I posted some debug that from the firmware module and
kobject_hotplug, and from there I couldn't see why it was failing.I know lots of changes have been made to hotplug in the kernel recently.
Shawn.
Quoted 9 lines · Oliver Neukum
Am Sonntag, 31. Oktober 2004 22:27 schrieb Shawn Starr:
Quoted 3 lines
Yeah I noticed my ipw2200 firmware broke in 2.6.10-rc1-bk5
Does 2.6.10-rc1 non-bk snapshots work for you?
Which script do you use to load the firmware?
Regards
Oliver-------------------------------------------------------
This SF.Net email is sponsored by:
Sybase ASE Linux Express Edition - download now for FREE LinuxWorld Reader's Choice Award Winner for best database on Linux.
http://ads.osdn.com/?ad_id=5588&alloc_id=12065&op=click
_______________________________________________
ipw2100-devel mailing list [email protected]
https://lists.sourceforge.net/lists/listinfo/ipw2100-devel
Yep, this fixes it
Quoted 51 lines · Shawn Starr
See: http://marc.theaimsgroup.com/?l=linux-kernel&m=109919609211671&w=2
This will appear in the next -bk automated snapshot soon.
That should fix everyone's firmware load failures.
Shawn.
Quoted 26 lines · Shawn Starr
0.0.20040329-1 Linux Hotplug Scripts
hotplug_20040329from Debian unstable/testing.Using 2.6.9-rc4-xx I had no problems with loading the firmware. As in my previous emails on the subject, I posted some debug that from the firmware module and
kobject_hotplug, and from there I couldn't see why it was failing.I know lots of changes have been made to hotplug in the kernel recently.
Shawn.
Quoted 10 lines · Oliver Neukum
Am Sonntag, 31. Oktober 2004 22:27 schrieb Shawn Starr:
Quoted 3 lines
Yeah I noticed my ipw2200 firmware broke in 2.6.10-rc1-bk5
Does 2.6.10-rc1 non-bk snapshots work for you?
Which script do you use to load the firmware?
Regards
OliverQuoted 9 lines
-------------------------------------------------------
This SF.Net email is sponsored by:
Sybase ASE Linux Express Edition - download now for FREE LinuxWorld Reader's Choice Award Winner for best database on Linux.
http://ads.osdn.com/?ad_id=5588&alloc_id=12065&op=click
_______________________________________________
ipw2100-devel mailing list [email protected]
https://lists.sourceforge.net/lists/listinfo/ipw2100-devel-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Signature · 2 lines
Regards, Christian