drm/i915/debugfs: Print sink PSR status
Subsystems (2)
PATCH 1/2 drm/i915/debugfs: Print sink PSR status
IGT tests could be improved with sink status, knowing for sure that hardware have activate or exit PSR.
--- drivers/gpu/drm/i915/i915_debugfs.c | 29 +++++++++++++++++++++++++++++ 1 file changed, 29 insertions(+)
drivers/gpu/drm/i915/i915_debugfs.c +29 -0
@@ -2603,6 +2603,26 @@ static const char *psr2_live_status(u32 val)return "unknown" ; } +static const char *psr_sink_status (u8 val) +{ +static const char *const sink_status[] = { +"inactive" , +"transition to active, capture and display" , +"active, display from RFB" , +"active, capture and display on sink device timings" , +"transition to inactive, capture and display, timing re-sync" , +"reserved" , +"reserved" , +"sink internal error" + }; + + val &=DP_PSR_SINK_STATE_MASK ; +if (val <ARRAY_SIZE (sink_status)) +return sink_status[val]; + +return "unknown" ; +} +static int i915_edp_psr_status (struct seq_file *m,void *data) {struct drm_i915_private *dev_priv =node_to_i915 (m->private);
@@ -2684,6 +2704,15 @@ static int i915_edp_psr_status(struct seq_file *m, void *data)seq_printf (m,"EDP_PSR2_STATUS: %x [%s]\n" , psr2,psr2_live_status (psr2)); } + +if (dev_priv->psr.enabled) { +struct drm_dp_aux *aux = &dev_priv->psr.enabled->aux; +u8 val; + +if (drm_dp_dpcd_readb (aux,DP_PSR_STATUS , &val) ==1 ) +seq_printf (m,"Sink PSR status: 0x%x [%s]\n" , val, +psr_sink_status (val)); + }mutex_unlock (&dev_priv->psr.lock);intel_runtime_pm_put (dev_priv);
Signature · 6 lines
2.16.3 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH 2/2 drm/i915/psr/cnl: Set y-coordinate as valid in SDP
This was my bad, spec says that the name of this bit is 'Y-coordinate valid' but the values for it is:
0: Include Y-coordinate valid eDP1.4a
1: Do not include Y-coordinate valid eDP 1.4 So renaming the bit and not setting it.
--- drivers/gpu/drm/i915/i915_reg.h | 2 +- drivers/gpu/drm/i915/intel_psr.c | 5 ++--- 2 files changed, 3 insertions(+), 4 deletions(-)
drivers/gpu/drm/i915/i915_reg.h +1 -1
@@ -4058,7 +4058,7 @@ enum {#define EDP_PSR2_CTL _MMIO(0x6f900)#define EDP_PSR2_ENABLE (1<<31)#define EDP_SU_TRACK_ENABLE (1<<30) -#define EDP_Y_COORDINATE_VALID (1<<26)/* GLK and CNL+ */ +#define EDP_Y_COORDINATE_INVALID (1<<26)/* GLK and CNL+ */ #define EDP_Y_COORDINATE_ENABLE (1<<25)/* GLK and CNL+ */ #define EDP_MAX_SU_DISABLE_TIME (t) ((t)<<20)#define EDP_MAX_SU_DISABLE_TIME_MASK (0x1f<<20)
drivers/gpu/drm/i915/intel_psr.c +2 -3
@@ -400,9 +400,8 @@ static void hsw_activate_psr2(struct intel_dp *intel_dp)* mesh at all with our frontbuffer tracking. And the hw alone isn't * good enough. */ val |=EDP_PSR2_ENABLE |EDP_SU_TRACK_ENABLE ; -if (INTEL_GEN (dev_priv) >=10 ||IS_GEMINILAKE (dev_priv)) { - val |=EDP_Y_COORDINATE_VALID |EDP_Y_COORDINATE_ENABLE ; - } +if (INTEL_GEN (dev_priv) >=10 ||IS_GEMINILAKE (dev_priv)) + val |=EDP_Y_COORDINATE_ENABLE ; val |=EDP_PSR2_FRAME_BEFORE_SU (dev_priv->psr.sink_sync_latency +1 );
Signature · 6 lines
2.16.3 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH 2/2] drm/i915/psr/cnl: Set y-coordinate as valid in SDP
Quoted 18 lines · José Roberto de Souza
This was my bad, spec says that the name of this bit is 'Y-coordinate valid' but the values for it is:
0: Include Y-coordinate valid eDP1.4a
1: Do not include Y-coordinate valid eDP 1.4 So renaming the bit and not setting it.Cc Dhinakaran Pandiyan <[email protected]>Signed-off-by José Roberto de Souza <[email protected]>--- drivers/gpu/drm/i915/i915_reg.h | 2 +- drivers/gpu/drm/i915/intel_psr.c | 5 ++--- 2 files changed, 3 insertions(+), 4 deletions(-)drivers/gpu/drm/i915/i915_reg.h +0
-0
drivers/gpu/drm/i915/i915_reg.h enum { · line 4061
Quoted 5 lines
drivers/gpu/drm/i915/i915_reg.h +1
-1@@ -4058,7 +4058,7 @@ enum {#define EDP_PSR2_CTL _MMIO(0x6f900)#define EDP_PSR2_ENABLE (1<<31)#define EDP_SU_TRACK_ENABLE (1<<30) -#define EDP_Y_COORDINATE_VALID (1<<26)/* GLK and CNL+ */ +#define EDP_Y_COORDINATE_INVALID (1<<26)/* GLK and CNL+ */
INVALID isn't the same as asking the source to not send the y-coordinate valid bit. Sorry to be pedantic, please leave the definition as it is.
remove this hunk.
Quoted 9 lines
drivers/gpu/drm/i915/i915_reg.h +0
-0#define EDP_Y_COORDINATE_ENABLE (1<<25)/* GLK and CNL+ */ #define EDP_MAX_SU_DISABLE_TIME (t) ((t)<<20)#define EDP_MAX_SU_DISABLE_TIME_MASK (0x1f<<20)drivers/gpu/drm/i915/intel_psr.c +0
-0@@ -400,9 +400,8 @@ static void hsw_activate_psr2(struct intel_dp *intel_dp)* mesh at all with our frontbuffer tracking. And the hw alone isn't
drivers/gpu/drm/i915/intel_psr.c static void hsw_activate_psr2(struct intel_dp *intel_dp) · line 407
Quoted 10 lines
drivers/gpu/drm/i915/intel_psr.c +2
-3* good enough. */ val |=EDP_PSR2_ENABLE |EDP_SU_TRACK_ENABLE ; -if (INTEL_GEN (dev_priv) >=10 ||IS_GEMINILAKE (dev_priv)) { - val |=EDP_Y_COORDINATE_VALID |EDP_Y_COORDINATE_ENABLE ; - } +if (INTEL_GEN (dev_priv) >=10 ||IS_GEMINILAKE (dev_priv)) + val |=EDP_Y_COORDINATE_ENABLE ; val |=EDP_PSR2_FRAME_BEFORE_SU (dev_priv->psr.sink_sync_latency +1 );
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH 2/2] drm/i915/psr/cnl: Set y-coordinate as valid in SDP
Quoted 23 lines · Dhinakaran
Quoted 22 lines · José Roberto de Souza
This was my bad, spec says that the name of this bit is 'Y-coordinate valid' but the values for it is:
0: Include Y-coordinate valid eDP1.4a
1: Do not include Y-coordinate valid eDP 1.4 So renaming the bit and not setting it.Cc Dhinakaran Pandiyan <[email protected]>Signed-off-by José Roberto de Souza <[email protected]>--- drivers/gpu/drm/i915/i915_reg.h | 2 +- drivers/gpu/drm/i915/intel_psr.c | 5 ++--- 2 files changed, 3 insertions(+), 4 deletions(-)drivers/gpu/drm/i915/i915_reg.h +0
-0@@ -4058,7 +4058,7 @@ enum {#define EDP_PSR2_CTL _MMIO(0x6f900)#define EDP_PSR2_ENABLE (1<<31)#define EDP_SU_TRACK_ENABLE (1<<30)
Quoted 8 lines
drivers/gpu/drm/i915/i915_reg.h enum { · line 4062
Quoted 3 lines
drivers/gpu/drm/i915/i915_reg.h +1
-1-#define EDP_Y_COORDINATE_VALID (1<<26) /* GLK and CNL+ */ +#define EDP_Y_COORDINATE_INVALID (1<<26)/* GLK and CNL+ */ INVALID isn't the same as asking the source to not send the y- coordinate
valid bit. Sorry to be pedantic, please leave the definition as it is.
I agree with you, if it don't need to send the y-coordinate is better just not set EDP_Y_COORDINATE_ENABLE but leave the bit definition name as it is, is prone to others do the same error as I did.
Quoted 31 lines
Reviewed-by Dhinakaran Pandiyan <[email protected]> ifyou
remove this hunk.Quoted 26 lines
drivers/gpu/drm/i915/i915_reg.h +0
-0#define EDP_Y_COORDINATE_ENABLE (1<<25)/* GLK and CNL+ */ #define
EDP_MAX_SU_DISABLE_TIME(t)((t)<<20)
#defineEDP_MAX_SU_DISABLE_TIME_MASK(0x1f<<20)drivers/gpu/drm/i915/intel_psr.c +0
-0@@ -400,9 +400,8 @@ static void hsw_activate_psr2(struct intel_dp *intel_dp) * mesh at all with our frontbuffer tracking. And the hwalone isn't
drivers/gpu/drm/i915/intel_psr.c +0
-1* good enough. */ val |=EDP_PSR2_ENABLE |EDP_SU_TRACK_ENABLE ; -if (INTEL_GEN (dev_priv) >=10 ||IS_GEMINILAKE (dev_priv)){
drivers/gpu/drm/i915/intel_psr.c +0
-1- val |= EDP_Y_COORDINATE_VALID |
EDP_Y_COORDINATE_ENABLE;drivers/gpu/drm/i915/intel_psr.c +2
-1- } +if (INTEL_GEN (dev_priv) >=10 ||IS_GEMINILAKE (dev_priv)) + val |=EDP_Y_COORDINATE_ENABLE ; val |= EDP_PSR2_FRAME_BEFORE_SU(dev_priv-Quoted 1 line
psr.sink_sync_latency + 1);
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH 2/2] drm/i915/psr/cnl: Set y-coordinate as valid in SDP
Quoted 33 lines · Jose
Quoted 23 lines · Dhinakaran
Quoted 22 lines · José Roberto de Souza
This was my bad, spec says that the name of this bit is 'Y-coordinate valid' but the values for it is:
0: Include Y-coordinate valid eDP1.4a
1: Do not include Y-coordinate valid eDP 1.4 So renaming the bit and not setting it.Cc Dhinakaran Pandiyan <[email protected]>Signed-off-by José Roberto de Souza <[email protected]>--- drivers/gpu/drm/i915/i915_reg.h | 2 +- drivers/gpu/drm/i915/intel_psr.c | 5 ++--- 2 files changed, 3 insertions(+), 4 deletions(-)drivers/gpu/drm/i915/i915_reg.h +0
-0@@ -4058,7 +4058,7 @@ enum {#define EDP_PSR2_CTL _MMIO(0x6f900)#define EDP_PSR2_ENABLE (1<<31)#define EDP_SU_TRACK_ENABLE (1<<30)Quoted 8 lines
drivers/gpu/drm/i915/i915_reg.h enum { · line 4062
Quoted 3 lines
drivers/gpu/drm/i915/i915_reg.h +1
-1-#define EDP_Y_COORDINATE_VALID (1<<26) /* GLK and CNL+ */ +#define EDP_Y_COORDINATE_INVALID (1<<26)/* GLK and CNL+ */ INVALID isn't the same as asking the source to not send the y- coordinate
valid bit. Sorry to be pedantic, please leave the definition as it is.
Quoted 5 lines
I agree with you, if it don't need to send the y-coordinate is better just not set
EDP_Y_COORDINATE_ENABLEbut leave the bit definition name as it is, is prone to others do the same error as I did.
I'll let Rodrigo take a call on this one.
-DK
Quoted 28 lines
Quoted 28 lines
Reviewed-by Dhinakaran Pandiyan <[email protected]> ifyou
remove this hunk.Quoted 23 lines
drivers/gpu/drm/i915/i915_reg.h +0
-0#define EDP_Y_COORDINATE_ENABLE (1<<25)/* GLK and CNL+ */ #define
EDP_MAX_SU_DISABLE_TIME(t)((t)<<20)
#defineEDP_MAX_SU_DISABLE_TIME_MASK(0x1f<<20)drivers/gpu/drm/i915/intel_psr.c +0
-0@@ -400,9 +400,8 @@ static void hsw_activate_psr2(struct intel_dp *intel_dp) * mesh at all with our frontbuffer tracking. And the hwalone isn't
drivers/gpu/drm/i915/intel_psr.c +0
-1* good enough. */ val |=EDP_PSR2_ENABLE |EDP_SU_TRACK_ENABLE ; -if (INTEL_GEN (dev_priv) >=10 ||IS_GEMINILAKE (dev_priv)){
drivers/gpu/drm/i915/intel_psr.c +0
-1- val |= EDP_Y_COORDINATE_VALID |
EDP_Y_COORDINATE_ENABLE;drivers/gpu/drm/i915/intel_psr.c +2
-1- } +if (INTEL_GEN (dev_priv) >=10 ||IS_GEMINILAKE (dev_priv)) + val |=EDP_Y_COORDINATE_ENABLE ;
Quoted 7 lines
Quoted 3 lines
Quoted 3 lines
val |= EDP_PSR2_FRAME_BEFORE_SU(dev_priv-
Quoted 1 line
psr.sink_sync_latency + 1);
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Rodrigo Vivi
maintainerRe: [PATCH 2/2] drm/i915/psr/cnl: Set y-coordinate as valid in SDP
Quoted 37 lines · Dhinakaran
Quoted 33 lines · Jose
Quoted 31 lines · Dhinakaran
Quoted 19 lines · José Roberto de Souza
This was my bad, spec says that the name of this bit is 'Y-coordinate valid' but the values for it is:
0: Include Y-coordinate valid eDP1.4a
1: Do not include Y-coordinate valid eDP 1.4 So renaming the bit and not setting it.Cc Dhinakaran Pandiyan <[email protected]>Signed-off-by José Roberto de Souza <[email protected]>--- drivers/gpu/drm/i915/i915_reg.h | 2 +- drivers/gpu/drm/i915/intel_psr.c | 5 ++--- 2 files changed, 3 insertions(+), 4 deletions(-)drivers/gpu/drm/i915/i915_reg.h +0
-0drivers/gpu/drm/i915/i915_reg.h enum { · line 4062
Quoted 6 lines
drivers/gpu/drm/i915/i915_reg.h +1
-1@@ -4058,7 +4058,7 @@ enum {#define EDP_PSR2_CTL _MMIO(0x6f900)#define EDP_PSR2_ENABLE (1<<31)#define EDP_SU_TRACK_ENABLE (1<<30) -#define EDP_Y_COORDINATE_VALID (1<<26) /* GLK and CNL+ */ +#define EDP_Y_COORDINATE_INVALID (1<<26)/* GLK and CNL+ */ INVALID isn't the same as asking the source to not send the y- coordinate
valid bit. Sorry to be pedantic, please leave the definition as it is.
Quoted 7 lines
Quoted 5 lines
I agree with you, if it don't need to send the y-coordinate is better just not set
EDP_Y_COORDINATE_ENABLEbut leave the bit definition name as it is, is prone to others do the same error as I did.I'll let Rodrigo take a call on this one.
I agree with DK.
Please use the spec name, i.e. "BitField: Y-coordinate valid"
"invalid" will actually bring even more confusion.
Quoted 38 lines
-DK
Quoted 35 lines
Quoted 31 lines
Reviewed-by Dhinakaran Pandiyan <[email protected]> ifyou
remove this hunk.Quoted 26 lines
drivers/gpu/drm/i915/i915_reg.h +0
-0#define EDP_Y_COORDINATE_ENABLE (1<<25)/* GLK and CNL+ */ #define
EDP_MAX_SU_DISABLE_TIME(t)((t)<<20)
#defineEDP_MAX_SU_DISABLE_TIME_MASK(0x1f<<20)drivers/gpu/drm/i915/intel_psr.c +0
-0@@ -400,9 +400,8 @@ static void hsw_activate_psr2(struct intel_dp *intel_dp) * mesh at all with our frontbuffer tracking. And the hwalone isn't
drivers/gpu/drm/i915/intel_psr.c +0
-1* good enough. */ val |=EDP_PSR2_ENABLE |EDP_SU_TRACK_ENABLE ; -if (INTEL_GEN (dev_priv) >=10 ||IS_GEMINILAKE (dev_priv)){
drivers/gpu/drm/i915/intel_psr.c +0
-1- val |= EDP_Y_COORDINATE_VALID |
EDP_Y_COORDINATE_ENABLE;drivers/gpu/drm/i915/intel_psr.c +2
-1- } +if (INTEL_GEN (dev_priv) >=10 ||IS_GEMINILAKE (dev_priv)) + val |=EDP_Y_COORDINATE_ENABLE ; val |= EDP_PSR2_FRAME_BEFORE_SU(dev_priv-Quoted 1 line
psr.sink_sync_latency + 1);
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✗ Fi.CI.CHECKPATCH: warning for series starting with [1/2] drm/i915/debugfs: Print sink PSR status
In reply to José Roberto de Souza== Series Details ==
== Series Details ==
Series: series starting with [1/2] drm/i915/debugfs: Print sink PSR status
URL : https://patchwork.freedesktop.org/series/40977/
State : warning
== Summary ==
$ dim checkpatch origin/drm-tip
9444b2175c0a drm/i915/debugfs: Print sink PSR status
6d65247b0089 drm/i915/psr/cnl: Set y-coordinate as valid in SDP
-:27: CHECK:SPACING: spaces preferred around that '<<' (ctx:VxV)
#27: FILE: drivers/gpu/drm/i915/i915_reg.h:4061:
+#define EDP_Y_COORDINATE_INVALID (1<<26) /* GLK and CNL+ */
^total: 0 errors, 0 warnings, 1 checks, 19 lines checked
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✓ Fi.CI.BAT: success for series starting with [1/2] drm/i915/debugfs: Print sink PSR status
In reply to José Roberto de Souza== Series Details ==
== Series Details ==
Series: series starting with [1/2] drm/i915/debugfs: Print sink PSR status
URL : https://patchwork.freedesktop.org/series/40977/
State : success
== Summary ==
Series 40977v1 series starting with [1/2] drm/i915/debugfs: Print sink PSR status
https://patchwork.freedesktop.org/api/1.0/series/40977/revisions/1/mbox/
fi-bdw-5557u total:285 pass:264 dwarn:0 dfail:0 fail:0 skip:21 time:431s fi-bdw-gvtdvm total:285 pass:261 dwarn:0 dfail:0 fail:0 skip:24 time:440s fi-blb-e6850 total:285 pass:220 dwarn:1 dfail:0 fail:0 skip:64 time:379s fi-bsw-n3050 total:285 pass:239 dwarn:0 dfail:0 fail:0 skip:46 time:541s fi-bwr-2160 total:285 pass:180 dwarn:0 dfail:0 fail:0 skip:105 time:297s fi-bxt-dsi total:285 pass:255 dwarn:0 dfail:0 fail:0 skip:30 time:511s fi-bxt-j4205 total:285 pass:256 dwarn:0 dfail:0 fail:0 skip:29 time:511s fi-byt-j1900 total:285 pass:250 dwarn:0 dfail:0 fail:0 skip:35 time:517s fi-byt-n2820 total:285 pass:246 dwarn:0 dfail:0 fail:0 skip:39 time:508s fi-cfl-8700k total:285 pass:257 dwarn:0 dfail:0 fail:0 skip:28 time:411s fi-cfl-s3 total:285 pass:259 dwarn:0 dfail:0 fail:0 skip:26 time:558s fi-cfl-u total:285 pass:259 dwarn:0 dfail:0 fail:0 skip:26 time:515s fi-cnl-y3 total:285 pass:259 dwarn:0 dfail:0 fail:0 skip:26 time:582s fi-elk-e7500 total:285 pass:225 dwarn:1 dfail:0 fail:0 skip:59 time:424s fi-gdg-551 total:285 pass:176 dwarn:0 dfail:0 fail:1 skip:108 time:319s fi-glk-1 total:285 pass:257 dwarn:0 dfail:0 fail:0 skip:28 time:542s fi-hsw-4770 total:285 pass:258 dwarn:0 dfail:0 fail:0 skip:27 time:404s fi-ilk-650 total:285 pass:225 dwarn:0 dfail:0 fail:0 skip:60 time:420s fi-ivb-3520m total:285 pass:256 dwarn:0 dfail:0 fail:0 skip:29 time:471s fi-ivb-3770 total:285 pass:252 dwarn:0 dfail:0 fail:0 skip:33 time:432s fi-kbl-7500u total:285 pass:260 dwarn:1 dfail:0 fail:0 skip:24 time:471s fi-kbl-7567u total:285 pass:265 dwarn:0 dfail:0 fail:0 skip:20 time:465s fi-kbl-r total:285 pass:258 dwarn:0 dfail:0 fail:0 skip:27 time:509s fi-pnv-d510 total:285 pass:219 dwarn:1 dfail:0 fail:0 skip:65 time:665s fi-skl-6260u total:285 pass:265 dwarn:0 dfail:0 fail:0 skip:20 time:436s fi-skl-6600u total:285 pass:258 dwarn:0 dfail:0 fail:0 skip:27 time:541s fi-skl-6700k2 total:285 pass:261 dwarn:0 dfail:0 fail:0 skip:24 time:506s fi-skl-6770hq total:285 pass:265 dwarn:0 dfail:0 fail:0 skip:20 time:490s fi-skl-guc total:285 pass:257 dwarn:0 dfail:0 fail:0 skip:28 time:430s fi-skl-gvtdvm total:285 pass:262 dwarn:0 dfail:0 fail:0 skip:23 time:444s fi-snb-2520m total:285 pass:245 dwarn:0 dfail:0 fail:0 skip:40 time:583s fi-snb-2600 total:285 pass:245 dwarn:0 dfail:0 fail:0 skip:40 time:400s Blacklisted hosts: fi-cnl-psr total:285 pass:256 dwarn:3 dfail:0 fail:0 skip:26 time:530s fi-glk-j4005 total:285 pass:256 dwarn:0 dfail:0 fail:0 skip:29 time:483s
c46052cde6a50c5459e00791ffc4d5aa1ec58a9e drm-tip: 2018y-03m-30d-18h-56m-26s UTC integration manifest 6d65247b0089 drm/i915/psr/cnl: Set y-coordinate as valid in SDP9444b2175c0a drm/i915/debugfs: Print sink PSR status
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_8553/issues.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✗ Fi.CI.IGT: failure for series starting with [1/2] drm/i915/debugfs: Print sink PSR status
In reply to José Roberto de Souza== Series Details ==
== Series Details ==
Series: series starting with [1/2] drm/i915/debugfs: Print sink PSR status
URL : https://patchwork.freedesktop.org/series/40977/
State : failure
== Summary ==
---- Possible new issues:
Test kms_cursor_crc:
Subgroup cursor-64x64-suspend:
dmesg-warn -> PASS (shard-snb)
Test kms_frontbuffer_tracking:
Subgroup fbc-1p-primscrn-shrfb-plflip-blt:
pass -> DMESG-FAIL (shard-apl)
Subgroup fbc-rgb565-draw-mmap-gtt:
pass -> FAIL (shard-apl)---- Known issues:
Test gem_softpin:
Subgroup noreloc-s3:
incomplete -> PASS (shard-hsw) fdo#103540
Test kms_flip:
Subgroup flip-vs-expired-vblank:
pass -> FAIL (shard-hsw) fdo#102887
Test kms_frontbuffer_tracking:
Subgroup fbc-1p-primscrn-shrfb-msflip-blt:
dmesg-fail -> PASS (shard-apl) fdo#104727fdo#103540 https://bugs.freedesktop.org/show_bug.cgi?id=103540
fdo#102887 https://bugs.freedesktop.org/show_bug.cgi?id=102887
fdo#104727 https://bugs.freedesktop.org/show_bug.cgi?id=104727
shard-apl total:3495 pass:1829 dwarn:1 dfail:1 fail:8 skip:1655 time:12846s shard-hsw total:3495 pass:1782 dwarn:1 dfail:0 fail:2 skip:1709 time:11486s shard-snb total:3495 pass:1374 dwarn:1 dfail:0 fail:3 skip:2117 time:7021s
Blacklisted hosts:
shard-kbl total:3495 pass:1959 dwarn:1 dfail:0 fail:7 skip:1528 time:9234s
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_8553/shards.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx