Skip to contentSkip to conversation

drm/i915/debugfs: Print sink PSR status

PATCH Superseded José Roberto de Souza 4 participants 9 messages Mar 30, 2018 – Apr 2, 2018

Subsystems (2)

v1 of 2 Superseded Latest is v2 →

lore
Share & tools
lore
#0 lore raw

PATCH 1/2 drm/i915/debugfs: Print sink PSR status

IGT tests could be improved with sink status, knowing for sure that hardware have activate or exit PSR.

---
 drivers/gpu/drm/i915/i915_debugfs.c | 29 +++++++++++++++++++++++++++++
 1 file changed, 29 insertions(+)
drivers/gpu/drm/i915/i915_debugfs.c +29 -0
index 1dba2c451255..c9ac946b62c9 100644
@@ -2603,6 +2603,26 @@ static const char *psr2_live_status(u32 val)
 	return "unknown";
 }
 
+static const char *psr_sink_status(u8 val)
+{
+	static const char * const sink_status[] = {
+		"inactive",
+		"transition to active, capture and display",
+		"active, display from RFB",
+		"active, capture and display on sink device timings",
+		"transition to inactive, capture and display, timing re-sync",
+		"reserved",
+		"reserved",
+		"sink internal error"
+	};
+
+	val &= DP_PSR_SINK_STATE_MASK;
+	if (val < ARRAY_SIZE(sink_status))
+		return sink_status[val];
+
+	return "unknown";
+}
+
 static int i915_edp_psr_status(struct seq_file *m, void *data)
 {
 	struct drm_i915_private *dev_priv = node_to_i915(m->private);
@@ -2684,6 +2704,15 @@ static int i915_edp_psr_status(struct seq_file *m, void *data)
 		seq_printf(m, "EDP_PSR2_STATUS: %x [%s]\n",
 			   psr2, psr2_live_status(psr2));
 	}
+
+	if (dev_priv->psr.enabled) {
+		struct drm_dp_aux *aux = &dev_priv->psr.enabled->aux;
+		u8 val;
+
+		if (drm_dp_dpcd_readb(aux, DP_PSR_STATUS, &val) == 1)
+			seq_printf(m, "Sink PSR status: 0x%x [%s]\n", val,
+				   psr_sink_status(val));
+	}
 	mutex_unlock(&dev_priv->psr.lock);
 
 	intel_runtime_pm_put(dev_priv);
Signature · 6 lines
2.16.3

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#1 lore raw

PATCH 2/2 drm/i915/psr/cnl: Set y-coordinate as valid in SDP

This was my bad, spec says that the name of this bit is 'Y-coordinate valid' but the values for it is:
0: Include Y-coordinate valid eDP1.4a
1: Do not include Y-coordinate valid eDP 1.4 So renaming the bit and not setting it.

---
 drivers/gpu/drm/i915/i915_reg.h  | 2 +-
 drivers/gpu/drm/i915/intel_psr.c | 5 ++---
 2 files changed, 3 insertions(+), 4 deletions(-)
drivers/gpu/drm/i915/i915_reg.h +1 -1
index 176dca6554f4..19429cb1f3a7 100644
@@ -4058,7 +4058,7 @@ enum {
 #define EDP_PSR2_CTL			_MMIO(0x6f900)
 #define   EDP_PSR2_ENABLE		(1<<31)
 #define   EDP_SU_TRACK_ENABLE		(1<<30)
-#define   EDP_Y_COORDINATE_VALID	(1<<26) /* GLK and CNL+ */
+#define   EDP_Y_COORDINATE_INVALID	(1<<26) /* GLK and CNL+ */
 #define   EDP_Y_COORDINATE_ENABLE	(1<<25) /* GLK and CNL+ */
 #define   EDP_MAX_SU_DISABLE_TIME(t)	((t)<<20)
 #define   EDP_MAX_SU_DISABLE_TIME_MASK	(0x1f<<20)
drivers/gpu/drm/i915/intel_psr.c +2 -3
index 2d53f7398a6d..f12111438bcf 100644
@@ -400,9 +400,8 @@ static void hsw_activate_psr2(struct intel_dp *intel_dp)
 	 * mesh at all with our frontbuffer tracking. And the hw alone isn't
 	 * good enough. */
 	val |= EDP_PSR2_ENABLE | EDP_SU_TRACK_ENABLE;
-	if (INTEL_GEN(dev_priv) >= 10 || IS_GEMINILAKE(dev_priv)) {
-		val |= EDP_Y_COORDINATE_VALID | EDP_Y_COORDINATE_ENABLE;
-	}
+	if (INTEL_GEN(dev_priv) >= 10 || IS_GEMINILAKE(dev_priv))
+		val |= EDP_Y_COORDINATE_ENABLE;
 
 	val |= EDP_PSR2_FRAME_BEFORE_SU(dev_priv->psr.sink_sync_latency + 1);
 
Signature · 6 lines
2.16.3

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Reviewed-by on v1 2/2
#2 lore raw

Re: [PATCH 2/2] drm/i915/psr/cnl: Set y-coordinate as valid in SDP

Quoted 18 lines · José Roberto de Souza

This was my bad, spec says that the name of this bit is 'Y-coordinate valid' but the values for it is:
0: Include Y-coordinate valid eDP1.4a
1: Do not include Y-coordinate valid eDP 1.4 So renaming the bit and not setting it.

---
 drivers/gpu/drm/i915/i915_reg.h  | 2 +-
 drivers/gpu/drm/i915/intel_psr.c | 5 ++---
 2 files changed, 3 insertions(+), 4 deletions(-)
drivers/gpu/drm/i915/i915_reg.h +0 -0
index 176dca6554f4..19429cb1f3a7 100644

drivers/gpu/drm/i915/i915_reg.h enum { · line 4061

Quoted 5 lines
drivers/gpu/drm/i915/i915_reg.h +1 -1
@@ -4058,7 +4058,7 @@ enum {
 #define EDP_PSR2_CTL			_MMIO(0x6f900)
 #define   EDP_PSR2_ENABLE		(1<<31)
 #define   EDP_SU_TRACK_ENABLE		(1<<30)
-#define   EDP_Y_COORDINATE_VALID	(1<<26) /* GLK and CNL+ */
+#define   EDP_Y_COORDINATE_INVALID	(1<<26) /* GLK and CNL+ */

INVALID isn't the same as asking the source to not send the y-coordinate valid bit. Sorry to be pedantic, please leave the definition as it is.

remove this hunk.

Quoted 9 lines
drivers/gpu/drm/i915/i915_reg.h +0 -0
 #define   EDP_Y_COORDINATE_ENABLE	(1<<25) /* GLK and CNL+ */
 #define   EDP_MAX_SU_DISABLE_TIME(t)	((t)<<20)
 #define   EDP_MAX_SU_DISABLE_TIME_MASK	(0x1f<<20)
drivers/gpu/drm/i915/intel_psr.c +0 -0
index 2d53f7398a6d..f12111438bcf 100644
@@ -400,9 +400,8 @@ static void hsw_activate_psr2(struct intel_dp *intel_dp)
 	 * mesh at all with our frontbuffer tracking. And the hw alone isn't

drivers/gpu/drm/i915/intel_psr.c static void hsw_activate_psr2(struct intel_dp *intel_dp) · line 407

Quoted 10 lines
drivers/gpu/drm/i915/intel_psr.c +2 -3
 	 * good enough. */
 	val |= EDP_PSR2_ENABLE | EDP_SU_TRACK_ENABLE;
-	if (INTEL_GEN(dev_priv) >= 10 || IS_GEMINILAKE(dev_priv)) {
-		val |= EDP_Y_COORDINATE_VALID | EDP_Y_COORDINATE_ENABLE;
-	}
+	if (INTEL_GEN(dev_priv) >= 10 || IS_GEMINILAKE(dev_priv))
+		val |= EDP_Y_COORDINATE_ENABLE;
 
 	val |= EDP_PSR2_FRAME_BEFORE_SU(dev_priv->psr.sink_sync_latency + 1);
 

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#3 lore raw

Re: [PATCH 2/2] drm/i915/psr/cnl: Set y-coordinate as valid in SDP

Quoted 23 lines · Dhinakaran
Quoted 22 lines · José Roberto de Souza

This was my bad, spec says that the name of this bit is 'Y-coordinate valid' but the values for it is:
0: Include Y-coordinate valid eDP1.4a
1: Do not include Y-coordinate valid eDP 1.4 So renaming the bit and not setting it.

---
 drivers/gpu/drm/i915/i915_reg.h  | 2 +-
 drivers/gpu/drm/i915/intel_psr.c | 5 ++---
 2 files changed, 3 insertions(+), 4 deletions(-)
drivers/gpu/drm/i915/i915_reg.h +0 -0
index 176dca6554f4..19429cb1f3a7 100644
@@ -4058,7 +4058,7 @@ enum {
 #define EDP_PSR2_CTL			_MMIO(0x6f900)
 #define   EDP_PSR2_ENABLE		(1<<31)
 #define   EDP_SU_TRACK_ENABLE		(1<<30)
Quoted 8 lines

drivers/gpu/drm/i915/i915_reg.h enum { · line 4062

Quoted 3 lines
drivers/gpu/drm/i915/i915_reg.h +1 -1
-#define   EDP_Y_COORDINATE_VALID	(1<<26) /* GLK and CNL+ */
+#define   EDP_Y_COORDINATE_INVALID	(1<<26) /* GLK and CNL+
 */

INVALID isn't the same as asking the source to not send the y- coordinate
valid bit. Sorry to be pedantic, please leave the definition as it is.

I agree with you, if it don't need to send the y-coordinate is better just not set EDP_Y_COORDINATE_ENABLE but leave the bit definition name as it is, is prone to others do the same error as I did.

Quoted 31 lines

you
remove this hunk.

Quoted 26 lines
drivers/gpu/drm/i915/i915_reg.h +0 -0
 #define   EDP_Y_COORDINATE_ENABLE	(1<<25) /* GLK and CNL+
 */

#define EDP_MAX_SU_DISABLE_TIME(t) ((t)<<20)
#define EDP_MAX_SU_DISABLE_TIME_MASK (0x1f<<20)

drivers/gpu/drm/i915/intel_psr.c +0 -0
index 2d53f7398a6d..f12111438bcf 100644
@@ -400,9 +400,8 @@ static void hsw_activate_psr2(struct intel_dp
 *intel_dp)
 	 * mesh at all with our frontbuffer tracking. And the hw

alone isn't

drivers/gpu/drm/i915/intel_psr.c +0 -1
 	 * good enough. */
 	val |= EDP_PSR2_ENABLE | EDP_SU_TRACK_ENABLE;
-	if (INTEL_GEN(dev_priv) >= 10 || IS_GEMINILAKE(dev_priv))

{

drivers/gpu/drm/i915/intel_psr.c +0 -1
-		val |= EDP_Y_COORDINATE_VALID |

EDP_Y_COORDINATE_ENABLE;

drivers/gpu/drm/i915/intel_psr.c +2 -1
-	}
+	if (INTEL_GEN(dev_priv) >= 10 || IS_GEMINILAKE(dev_priv))
+		val |= EDP_Y_COORDINATE_ENABLE;
 
 	val |= EDP_PSR2_FRAME_BEFORE_SU(dev_priv-
Quoted 1 line

psr.sink_sync_latency + 1);

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#4 lore raw

Re: [PATCH 2/2] drm/i915/psr/cnl: Set y-coordinate as valid in SDP

Quoted 33 lines · Jose
Quoted 23 lines · Dhinakaran
Quoted 22 lines · José Roberto de Souza

This was my bad, spec says that the name of this bit is 'Y-coordinate valid' but the values for it is:
0: Include Y-coordinate valid eDP1.4a
1: Do not include Y-coordinate valid eDP 1.4 So renaming the bit and not setting it.

---
 drivers/gpu/drm/i915/i915_reg.h  | 2 +-
 drivers/gpu/drm/i915/intel_psr.c | 5 ++---
 2 files changed, 3 insertions(+), 4 deletions(-)
drivers/gpu/drm/i915/i915_reg.h +0 -0
index 176dca6554f4..19429cb1f3a7 100644
@@ -4058,7 +4058,7 @@ enum {
 #define EDP_PSR2_CTL			_MMIO(0x6f900)
 #define   EDP_PSR2_ENABLE		(1<<31)
 #define   EDP_SU_TRACK_ENABLE		(1<<30)
Quoted 8 lines

drivers/gpu/drm/i915/i915_reg.h enum { · line 4062

Quoted 3 lines
drivers/gpu/drm/i915/i915_reg.h +1 -1
-#define   EDP_Y_COORDINATE_VALID	(1<<26) /* GLK and CNL+ */
+#define   EDP_Y_COORDINATE_INVALID	(1<<26) /* GLK and CNL+
 */

INVALID isn't the same as asking the source to not send the y- coordinate
valid bit. Sorry to be pedantic, please leave the definition as it is.

Quoted 5 lines

I agree with you, if it don't need to send the y-coordinate is better just not set EDP_Y_COORDINATE_ENABLE but leave the bit definition name as it is, is prone to others do the same error as I did.

I'll let Rodrigo take a call on this one.

-DK

Quoted 28 lines
Quoted 28 lines

you
remove this hunk.

Quoted 23 lines
drivers/gpu/drm/i915/i915_reg.h +0 -0
 #define   EDP_Y_COORDINATE_ENABLE	(1<<25) /* GLK and CNL+
 */

#define EDP_MAX_SU_DISABLE_TIME(t) ((t)<<20)
#define EDP_MAX_SU_DISABLE_TIME_MASK (0x1f<<20)

drivers/gpu/drm/i915/intel_psr.c +0 -0
index 2d53f7398a6d..f12111438bcf 100644
@@ -400,9 +400,8 @@ static void hsw_activate_psr2(struct intel_dp
 *intel_dp)
 	 * mesh at all with our frontbuffer tracking. And the hw

alone isn't

drivers/gpu/drm/i915/intel_psr.c +0 -1
 	 * good enough. */
 	val |= EDP_PSR2_ENABLE | EDP_SU_TRACK_ENABLE;
-	if (INTEL_GEN(dev_priv) >= 10 || IS_GEMINILAKE(dev_priv))

{

drivers/gpu/drm/i915/intel_psr.c +0 -1
-		val |= EDP_Y_COORDINATE_VALID |

EDP_Y_COORDINATE_ENABLE;

drivers/gpu/drm/i915/intel_psr.c +2 -1
-	}
+	if (INTEL_GEN(dev_priv) >= 10 || IS_GEMINILAKE(dev_priv))
+		val |= EDP_Y_COORDINATE_ENABLE;
Quoted 7 lines
Quoted 3 lines
Quoted 3 lines

val |= EDP_PSR2_FRAME_BEFORE_SU(dev_priv-

Quoted 1 line

psr.sink_sync_latency + 1);

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

maintainer
#5 lore raw

Re: [PATCH 2/2] drm/i915/psr/cnl: Set y-coordinate as valid in SDP

Quoted 37 lines · Dhinakaran
Quoted 33 lines · Jose
Quoted 31 lines · Dhinakaran
Quoted 19 lines · José Roberto de Souza

This was my bad, spec says that the name of this bit is 'Y-coordinate valid' but the values for it is:
0: Include Y-coordinate valid eDP1.4a
1: Do not include Y-coordinate valid eDP 1.4 So renaming the bit and not setting it.

---
 drivers/gpu/drm/i915/i915_reg.h  | 2 +-
 drivers/gpu/drm/i915/intel_psr.c | 5 ++---
 2 files changed, 3 insertions(+), 4 deletions(-)
drivers/gpu/drm/i915/i915_reg.h +0 -0
index 176dca6554f4..19429cb1f3a7 100644

drivers/gpu/drm/i915/i915_reg.h enum { · line 4062

Quoted 6 lines
drivers/gpu/drm/i915/i915_reg.h +1 -1
@@ -4058,7 +4058,7 @@ enum {
 #define EDP_PSR2_CTL			_MMIO(0x6f900)
 #define   EDP_PSR2_ENABLE		(1<<31)
 #define   EDP_SU_TRACK_ENABLE		(1<<30)
-#define   EDP_Y_COORDINATE_VALID	(1<<26) /* GLK and CNL+ */
+#define   EDP_Y_COORDINATE_INVALID	(1<<26) /* GLK and CNL+
 */

INVALID isn't the same as asking the source to not send the y- coordinate
valid bit. Sorry to be pedantic, please leave the definition as it is.

Quoted 7 lines
Quoted 5 lines

I agree with you, if it don't need to send the y-coordinate is better just not set EDP_Y_COORDINATE_ENABLE but leave the bit definition name as it is, is prone to others do the same error as I did.

I'll let Rodrigo take a call on this one.

I agree with DK.

Please use the spec name, i.e. "BitField: Y-coordinate valid"

"invalid" will actually bring even more confusion.

Quoted 38 lines

-DK

Quoted 35 lines
Quoted 31 lines

you
remove this hunk.

Quoted 26 lines
drivers/gpu/drm/i915/i915_reg.h +0 -0
 #define   EDP_Y_COORDINATE_ENABLE	(1<<25) /* GLK and CNL+
 */

#define EDP_MAX_SU_DISABLE_TIME(t) ((t)<<20)
#define EDP_MAX_SU_DISABLE_TIME_MASK (0x1f<<20)

drivers/gpu/drm/i915/intel_psr.c +0 -0
index 2d53f7398a6d..f12111438bcf 100644
@@ -400,9 +400,8 @@ static void hsw_activate_psr2(struct intel_dp
 *intel_dp)
 	 * mesh at all with our frontbuffer tracking. And the hw

alone isn't

drivers/gpu/drm/i915/intel_psr.c +0 -1
 	 * good enough. */
 	val |= EDP_PSR2_ENABLE | EDP_SU_TRACK_ENABLE;
-	if (INTEL_GEN(dev_priv) >= 10 || IS_GEMINILAKE(dev_priv))

{

drivers/gpu/drm/i915/intel_psr.c +0 -1
-		val |= EDP_Y_COORDINATE_VALID |

EDP_Y_COORDINATE_ENABLE;

drivers/gpu/drm/i915/intel_psr.c +2 -1
-	}
+	if (INTEL_GEN(dev_priv) >= 10 || IS_GEMINILAKE(dev_priv))
+		val |= EDP_Y_COORDINATE_ENABLE;
 
 	val |= EDP_PSR2_FRAME_BEFORE_SU(dev_priv-
Quoted 1 line

psr.sink_sync_latency + 1);

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#6 lore raw

✗ Fi.CI.CHECKPATCH: warning for series starting with [1/2] drm/i915/debugfs: Print sink PSR status

In reply to José Roberto de Souza
== Series Details ==

== Series Details ==

Series: series starting with [1/2] drm/i915/debugfs: Print sink PSR status
URL : https://patchwork.freedesktop.org/series/40977/
State : warning

== Summary ==

$ dim checkpatch origin/drm-tip
9444b2175c0a drm/i915/debugfs: Print sink PSR status
6d65247b0089 drm/i915/psr/cnl: Set y-coordinate as valid in SDP
-:27: CHECK:SPACING: spaces preferred around that '<<' (ctx:VxV)
#27: FILE: drivers/gpu/drm/i915/i915_reg.h:4061:
+#define   EDP_Y_COORDINATE_INVALID	(1<<26) /* GLK and CNL+ */
                                   	  ^

total: 0 errors, 0 warnings, 1 checks, 19 lines checked

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#7 lore raw

✓ Fi.CI.BAT: success for series starting with [1/2] drm/i915/debugfs: Print sink PSR status

In reply to José Roberto de Souza
== Series Details ==

== Series Details ==

Series: series starting with [1/2] drm/i915/debugfs: Print sink PSR status
URL : https://patchwork.freedesktop.org/series/40977/
State : success

== Summary ==

Series 40977v1 series starting with [1/2] drm/i915/debugfs: Print sink PSR status
https://patchwork.freedesktop.org/api/1.0/series/40977/revisions/1/mbox/

fi-bdw-5557u     total:285  pass:264  dwarn:0   dfail:0   fail:0   skip:21  time:431s
fi-bdw-gvtdvm    total:285  pass:261  dwarn:0   dfail:0   fail:0   skip:24  time:440s
fi-blb-e6850     total:285  pass:220  dwarn:1   dfail:0   fail:0   skip:64  time:379s
fi-bsw-n3050     total:285  pass:239  dwarn:0   dfail:0   fail:0   skip:46  time:541s
fi-bwr-2160      total:285  pass:180  dwarn:0   dfail:0   fail:0   skip:105 time:297s
fi-bxt-dsi       total:285  pass:255  dwarn:0   dfail:0   fail:0   skip:30  time:511s
fi-bxt-j4205     total:285  pass:256  dwarn:0   dfail:0   fail:0   skip:29  time:511s
fi-byt-j1900     total:285  pass:250  dwarn:0   dfail:0   fail:0   skip:35  time:517s
fi-byt-n2820     total:285  pass:246  dwarn:0   dfail:0   fail:0   skip:39  time:508s
fi-cfl-8700k     total:285  pass:257  dwarn:0   dfail:0   fail:0   skip:28  time:411s
fi-cfl-s3        total:285  pass:259  dwarn:0   dfail:0   fail:0   skip:26  time:558s
fi-cfl-u         total:285  pass:259  dwarn:0   dfail:0   fail:0   skip:26  time:515s
fi-cnl-y3        total:285  pass:259  dwarn:0   dfail:0   fail:0   skip:26  time:582s
fi-elk-e7500     total:285  pass:225  dwarn:1   dfail:0   fail:0   skip:59  time:424s
fi-gdg-551       total:285  pass:176  dwarn:0   dfail:0   fail:1   skip:108 time:319s
fi-glk-1         total:285  pass:257  dwarn:0   dfail:0   fail:0   skip:28  time:542s
fi-hsw-4770      total:285  pass:258  dwarn:0   dfail:0   fail:0   skip:27  time:404s
fi-ilk-650       total:285  pass:225  dwarn:0   dfail:0   fail:0   skip:60  time:420s
fi-ivb-3520m     total:285  pass:256  dwarn:0   dfail:0   fail:0   skip:29  time:471s
fi-ivb-3770      total:285  pass:252  dwarn:0   dfail:0   fail:0   skip:33  time:432s
fi-kbl-7500u     total:285  pass:260  dwarn:1   dfail:0   fail:0   skip:24  time:471s
fi-kbl-7567u     total:285  pass:265  dwarn:0   dfail:0   fail:0   skip:20  time:465s
fi-kbl-r         total:285  pass:258  dwarn:0   dfail:0   fail:0   skip:27  time:509s
fi-pnv-d510      total:285  pass:219  dwarn:1   dfail:0   fail:0   skip:65  time:665s
fi-skl-6260u     total:285  pass:265  dwarn:0   dfail:0   fail:0   skip:20  time:436s
fi-skl-6600u     total:285  pass:258  dwarn:0   dfail:0   fail:0   skip:27  time:541s
fi-skl-6700k2    total:285  pass:261  dwarn:0   dfail:0   fail:0   skip:24  time:506s
fi-skl-6770hq    total:285  pass:265  dwarn:0   dfail:0   fail:0   skip:20  time:490s
fi-skl-guc       total:285  pass:257  dwarn:0   dfail:0   fail:0   skip:28  time:430s
fi-skl-gvtdvm    total:285  pass:262  dwarn:0   dfail:0   fail:0   skip:23  time:444s
fi-snb-2520m     total:285  pass:245  dwarn:0   dfail:0   fail:0   skip:40  time:583s
fi-snb-2600      total:285  pass:245  dwarn:0   dfail:0   fail:0   skip:40  time:400s
Blacklisted hosts:
fi-cnl-psr       total:285  pass:256  dwarn:3   dfail:0   fail:0   skip:26  time:530s
fi-glk-j4005     total:285  pass:256  dwarn:0   dfail:0   fail:0   skip:29  time:483s

c46052cde6a50c5459e00791ffc4d5aa1ec58a9e drm-tip: 2018y-03m-30d-18h-56m-26s UTC integration manifest 6d65247b0089 drm/i915/psr/cnl: Set y-coordinate as valid in SDP
9444b2175c0a drm/i915/debugfs: Print sink PSR status

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_8553/issues.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#8 lore raw

✗ Fi.CI.IGT: failure for series starting with [1/2] drm/i915/debugfs: Print sink PSR status

In reply to José Roberto de Souza
== Series Details ==

== Series Details ==

Series: series starting with [1/2] drm/i915/debugfs: Print sink PSR status
URL : https://patchwork.freedesktop.org/series/40977/
State : failure

== Summary ==

---- Possible new issues:

Test kms_cursor_crc:

        Subgroup cursor-64x64-suspend:
                dmesg-warn -> PASS       (shard-snb)
Test kms_frontbuffer_tracking:
        Subgroup fbc-1p-primscrn-shrfb-plflip-blt:
                pass       -> DMESG-FAIL (shard-apl)
        Subgroup fbc-rgb565-draw-mmap-gtt:
                pass       -> FAIL       (shard-apl)

---- Known issues:

Test gem_softpin:

        Subgroup noreloc-s3:
                incomplete -> PASS       (shard-hsw) fdo#103540
Test kms_flip:
        Subgroup flip-vs-expired-vblank:
                pass       -> FAIL       (shard-hsw) fdo#102887
Test kms_frontbuffer_tracking:
        Subgroup fbc-1p-primscrn-shrfb-msflip-blt:
                dmesg-fail -> PASS       (shard-apl) fdo#104727

fdo#103540 https://bugs.freedesktop.org/show_bug.cgi?id=103540
fdo#102887 https://bugs.freedesktop.org/show_bug.cgi?id=102887
fdo#104727 https://bugs.freedesktop.org/show_bug.cgi?id=104727

shard-apl        total:3495 pass:1829 dwarn:1   dfail:1   fail:8   skip:1655 time:12846s
shard-hsw        total:3495 pass:1782 dwarn:1   dfail:0   fail:2   skip:1709 time:11486s
shard-snb        total:3495 pass:1374 dwarn:1   dfail:0   fail:3   skip:2117 time:7021s

Blacklisted hosts:
shard-kbl total:3495 pass:1959 dwarn:1 dfail:0 fail:7 skip:1528 time:9234s

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_8553/shards.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx