Trouble managing Trust WebCam
Hi,
While plugging a "Trust 150 Spacecam portable" into a usb2.0 port, this is the
"tail -f /var/log/messages":
Nov 18 17:10:26 toth kernel: ohci_hcd 0000:02:00.1: wakeup Nov 18 17:10:26 toth kernel: usb 5-1: new full speed USB device using address 3 Nov 18 17:10:26 toth kernel: usb 5-1: SN9C10[12] PC Camera Controller detected (vid/pid 0x0C45/0x6029) Nov 18 17:10:26 toth kernel: usb 5-1: PAS106B image sensor detected Nov 18 17:10:27 toth kernel: usb 5-1: Initialization succeeded Nov 18 17:10:27 toth kernel: usb 5-1: V4L2 device registered as /dev/video0 Nov 18 17:10:32 toth wait_for_sysfs[7308]: either wait_for_sysfs (udev
044) needs an update to handle the device '/class/video4linux/video0' properly (no device symlink) or the sysfs-support of your device's driver needs to be fixed, please report to <[email protected]>
My system:
kernel 2.6.8.1-20mdk
fs: reiserFS
cpu: PIII 1GHz 512Mb ram
Output for hdparm:
[root@toth dev]# hdparm /dev/hda
/dev/hda:
multcount = 16 (on) IO_support = 0 (default 16-bit) unmaskirq = 0 (off) using_dma = 1 (on) keepsettings = 0 (off) readonly = 0 (off) readahead = 256 (on) geometry = 38760/16/63, sectors = 20003880960, start = 0
Presence of dev:
lrwxrwxrwx 1 root root 6 Nov 18 17:10 video -> video0
crw-rw---- 1 davide video 81, 0 Nov 18 17:10 video0
Output of lsmod:
Module Size Used by i830 74516 2 nfsd 189408 8 exportfs 4736 1 nfsd lockd 58344 2 nfsd sunrpc 127652 2 nfsd,lockd md5 3584 1 ipv6 230916 14 nls_cp437 5312 3 snd-seq-oss 31232 0 snd-seq-midi-event 6080 1 snd-seq-oss snd-seq 47440 4 snd-seq-oss,snd-seq-midi-event snd-pcm-oss 49480 0 snd-mixer-oss 17376 1 snd-pcm-oss snd-intel8x0 30124 0 snd-ac97-codec 69392 1 snd-intel8x0 snd-pcm 81800 2 snd-pcm-oss,snd-intel8x0 snd-timer 20356 2 snd-seq,snd-pcm snd-page-alloc 7400 2 snd-intel8x0,snd-pcm gameport 3328 1 snd-intel8x0 snd-mpu401-uart 5856 1 snd-intel8x0 snd-rawmidi 19300 1 snd-mpu401-uart snd-seq-device 6344 3 snd-seq-oss,snd-seq,snd-rawmidi snd 45988 11 snd-seq-oss,snd-seq,snd-pcm-oss,snd-mixer-oss,snd-intel8x0,snd-ac97-codec,snd-pcm,snd-timer,snd-mpu401-uart,snd-rawmidi,snd-seq-device soundcore 7008 1 snd sn9c102 54280 0 videodev 7168 1 sn9c102 usb-storage 65504 3 af_packet 16072 2 ehci-hcd 26244 0 ohci-hcd 18468 0 ds 17572 4 yenta_socket 18624 2 pcmcia_core 59972 2 ds,yenta_socket thermal 9928 0 tc1100-wmi 5028 0 processor 13736 1 thermal fan 2756 0 button 4624 0 battery 7044 0 ac 3204 0 eth1394 17000 0 e100 28160 0 mii 4224 1 e100 ide-cd 37280 0 cdrom 37724 1 ide-cd ohci1394 30788 0 ieee1394 292056 2 eth1394,ohci1394 loop 12520 0 nls_iso8859-1 3680 4 ntfs 147964 1 sd_mod 19232 4 vfat 11008 3 fat 39776 1 vfat intel-agp 19584 1 agpgart 27752 4 intel-agp nvram 6856 0 sg 33788 0 scsi_mod 104044 3 usb-storage,sd_mod,sg joydev 8032 0 evdev 7648 1 tsdev 5824 0 usbmouse 4256 0 usbhid 41088 0 uhci-hcd 28752 0 usbcore 103172 9
sn9c102,usb-storage,ehci-hcd,ohci-hcd,usbmouse,usbhid,uhci-hcd
genrtc 7444 0
reiserfs 258324 1
Relevant output in dmesg:
........ohci_hcd 0000:02:00.1: wakeup
usb 5-1: new full speed USB device using address 3 usb 5-1: SN9C10[12] PC Camera Controller detected (vid/pid 0x0C45/0x6029)
usb 5-1: PAS106B image sensor detected
usb 5-1: Initialization succeeded
usb 5-1: V4L2 device registered as /dev/video0
Launching Gnomemeeting, all fails in core dumping.
Any idea?
Thanx!
Dav
Signature · 4 lines
Davide Monge cell: 349 6205515 --------------------- Key fingerprint = 6AB9 E2B9 C54E 8579 B4AE AD4C 3BA5
Quoted 7 lines · Davide Monge
While plugging a "Trust 150 Spacecam portable" into a usb2.0 port, this
Nov 18 17:10:32 toth wait_for_sysfs[7308]: either wait_for_sysfs (udev044) needs an update to handle the device '/class/video4linux/video0' properly (no device symlink) or the sysfs-support of your device's driver needs to be fixed, please report to <[email protected]>
The video driver should create a symlink to the physical device, but that's not the reason your camera is not working.
Quoted 3 lines
Launching Gnomemeeting, all fails in core dumping.
Any idea?
It does not seems like a hotplug problem. You may ask the author of the driver. If you do that, it would be nice to ask him to link the class_device to a physical device too.
Thanks,
Kay
-------------------------------------------------------
This SF.Net email is sponsored by: InterSystems CACHE
FREE OODBMS DOWNLOAD - A multidimensional database that combines robust object and relational technologies, making it a perfect match for Java, C++,COM, XML, ODBC and JDBC. www.intersystems.com/match8
_______________________________________________
Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net
[email protected]
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel