Skip to contentSkip to conversation

Trouble managing Trust WebCam

DISCUSSION Davide Monge 2 participants 2 messages Nov 18, 2004

lore
Share & tools
lore
#0 lore raw

Hi,

While plugging a "Trust 150 Spacecam portable" into a usb2.0 port, this is the
"tail -f /var/log/messages":

Nov 18 17:10:26 toth kernel: ohci_hcd 0000:02:00.1: wakeup
Nov 18 17:10:26 toth kernel: usb 5-1: new full speed USB device using
address 3
Nov 18 17:10:26 toth kernel: usb 5-1: SN9C10[12] PC Camera Controller
detected (vid/pid 0x0C45/0x6029)
Nov 18 17:10:26 toth kernel: usb 5-1: PAS106B image sensor detected
Nov 18 17:10:27 toth kernel: usb 5-1: Initialization succeeded
Nov 18 17:10:27 toth kernel: usb 5-1: V4L2 device registered
as /dev/video0
Nov 18 17:10:32 toth wait_for_sysfs[7308]: either wait_for_sysfs (udev

044) needs an update to handle the device '/class/video4linux/video0' properly (no device symlink) or the sysfs-support of your device's driver needs to be fixed, please report to <[email protected]>

My system:

kernel 2.6.8.1-20mdk
fs: reiserFS
cpu: PIII 1GHz 512Mb ram

Output for hdparm:

[root@toth dev]# hdparm /dev/hda

/dev/hda:

 multcount    = 16 (on)
 IO_support   =  0 (default 16-bit)
 unmaskirq    =  0 (off)
 using_dma    =  1 (on)
 keepsettings =  0 (off)
 readonly     =  0 (off)
 readahead    = 256 (on)
 geometry     = 38760/16/63, sectors = 20003880960, start = 0

Presence of dev:

lrwxrwxrwx 1 root root 6 Nov 18 17:10 video -> video0
crw-rw---- 1 davide video 81, 0 Nov 18 17:10 video0

Output of lsmod:

Module                  Size  Used by
i830                   74516  2
nfsd                  189408  8
exportfs                4736  1 nfsd
lockd                  58344  2 nfsd
sunrpc                127652  2 nfsd,lockd
md5                     3584  1
ipv6                  230916  14
nls_cp437               5312  3
snd-seq-oss            31232  0
snd-seq-midi-event      6080  1 snd-seq-oss
snd-seq                47440  4 snd-seq-oss,snd-seq-midi-event
snd-pcm-oss            49480  0
snd-mixer-oss          17376  1 snd-pcm-oss
snd-intel8x0           30124  0
snd-ac97-codec         69392  1 snd-intel8x0
snd-pcm                81800  2 snd-pcm-oss,snd-intel8x0
snd-timer              20356  2 snd-seq,snd-pcm
snd-page-alloc          7400  2 snd-intel8x0,snd-pcm
gameport                3328  1 snd-intel8x0
snd-mpu401-uart         5856  1 snd-intel8x0
snd-rawmidi            19300  1 snd-mpu401-uart
snd-seq-device          6344  3 snd-seq-oss,snd-seq,snd-rawmidi
snd                    45988  11
snd-seq-oss,snd-seq,snd-pcm-oss,snd-mixer-oss,snd-intel8x0,snd-ac97-codec,snd-pcm,snd-timer,snd-mpu401-uart,snd-rawmidi,snd-seq-device
soundcore               7008  1 snd
sn9c102                54280  0
videodev                7168  1 sn9c102
usb-storage            65504  3
af_packet              16072  2
ehci-hcd               26244  0
ohci-hcd               18468  0
ds                     17572  4
yenta_socket           18624  2
pcmcia_core            59972  2 ds,yenta_socket
thermal                 9928  0
tc1100-wmi              5028  0
processor              13736  1 thermal
fan                     2756  0
button                  4624  0
battery                 7044  0
ac                      3204  0
eth1394                17000  0
e100                   28160  0
mii                     4224  1 e100
ide-cd                 37280  0
cdrom                  37724  1 ide-cd
ohci1394               30788  0
ieee1394              292056  2 eth1394,ohci1394
loop                   12520  0
nls_iso8859-1           3680  4
ntfs                  147964  1
sd_mod                 19232  4
vfat                   11008  3
fat                    39776  1 vfat
intel-agp              19584  1
agpgart                27752  4 intel-agp
nvram                   6856  0
sg                     33788  0
scsi_mod              104044  3 usb-storage,sd_mod,sg
joydev                  8032  0
evdev                   7648  1
tsdev                   5824  0
usbmouse                4256  0
usbhid                 41088  0
uhci-hcd               28752  0
usbcore               103172  9

sn9c102,usb-storage,ehci-hcd,ohci-hcd,usbmouse,usbhid,uhci-hcd
genrtc 7444 0
reiserfs 258324 1

Relevant output in dmesg:

........
ohci_hcd 0000:02:00.1: wakeup
usb 5-1: new full speed USB device using address 3 usb 5-1: SN9C10[12] PC Camera Controller detected (vid/pid 0x0C45/0x6029)
usb 5-1: PAS106B image sensor detected
usb 5-1: Initialization succeeded
usb 5-1: V4L2 device registered as /dev/video0

Launching Gnomemeeting, all fails in core dumping.

Any idea?

Thanx!

Dav

Signature · 4 lines
Davide Monge
cell: 349 6205515
---------------------
Key fingerprint = 6AB9 E2B9 C54E 8579 B4AE  AD4C 3BA5
#1 lore raw
Quoted 7 lines · Davide Monge

While plugging a "Trust 150 Spacecam portable" into a usb2.0 port, this

Nov 18 17:10:32 toth wait_for_sysfs[7308]: either wait_for_sysfs (udev

044) needs an update to handle the device '/class/video4linux/video0' properly (no device symlink) or the sysfs-support of your device's driver needs to be fixed, please report to <[email protected]>

The video driver should create a symlink to the physical device, but that's not the reason your camera is not working.

Quoted 3 lines

Launching Gnomemeeting, all fails in core dumping.

Any idea?

It does not seems like a hotplug problem. You may ask the author of the driver. If you do that, it would be nice to ask him to link the class_device to a physical device too.

Thanks,
Kay

-------------------------------------------------------
This SF.Net email is sponsored by: InterSystems CACHE
FREE OODBMS DOWNLOAD - A multidimensional database that combines robust object and relational technologies, making it a perfect match for Java, C++,COM, XML, ODBC and JDBC. www.intersystems.com/match8
_______________________________________________
Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net
[email protected]
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel