Skip to contentSkip to conversation

AHA1505 and 2.6.9 kernel

DISCUSSION Nicola Ricciarelli 1 participant 1 message Nov 27, 2004 SCSI

lore
Share & tools
lore
#0 lore raw

I've a very old SCSI controller, ADAPTEC AHA1505, I use it just to control an Epson GT5500 scanner. I know .. very old controller ^_* but sufficient for a scanner. I've selected hardware jumpers of the controller so it has I/O= 0x140 and IRQ=9 (the only one free IRQ using windows .. IRQ=11 it has a conflict with ethernet card). The scanner has ID=2.

* Adding    aha152x=0x140,9,2  in grub.conf nothing occurs
* Adding    aha152x=0x140,9    in grub.conf nothing occurs
* Adding    options aha152x aha152x=0x140,9,2  in /etc/modprobe.conf

and typing modprobe aha152x nothing occurs
* Adding options aha152x aha152x=0x140,9 in /etc/modprobe.conf
and typing modprobe aha152x nothing occurs

all times it says:

Nov 27 09:22:03 localhost kernel: aha152x: BIOS test: passed, 1
controller(s) configured
Nov 27 09:22:05 localhost kernel: aha152x: resetting bus...
Nov 27 09:22:05 localhost kernel: aha152x3: vital data: rev=1, io=0x140

(0x140/0x140), irq
=9, scsiid=7, reconnect=enabled, parity=enabled, synchronous=disabled, delay=1000, extende
d translation=disabled

Nov 27 09:22:05 localhost kernel: aha152x3: trying software interrupt,
lost.
Nov 27 09:22:05 localhost kernel: aha152x3: irq 9 possibly wrong.

Please verify.

Nicola

PS: I was missing a couple of infos: I'm using Fedora Core 2 distro and kernel 2.6.9-1.6_FC2 (but I'm going to recompile the 2.6.9 kernel + patch 2.6.10-rc2).

Signature · 1 line
Nicola Ricciarelli <[email protected]>