AHA1505 and 2.6.9 kernel
I've a very old SCSI controller, ADAPTEC AHA1505, I use it just to control an Epson GT5500 scanner. I know .. very old controller ^_* but sufficient for a scanner. I've selected hardware jumpers of the controller so it has I/O= 0x140 and IRQ=9 (the only one free IRQ using windows .. IRQ=11 it has a conflict with ethernet card). The scanner has ID=2.
* Adding aha152x=0x140,9,2 in grub.conf nothing occurs * Adding aha152x=0x140,9 in grub.conf nothing occurs * Adding options aha152x aha152x=0x140,9,2 in /etc/modprobe.conf
and typing modprobe aha152x nothing occurs
* Adding options aha152x aha152x=0x140,9 in /etc/modprobe.conf
and typing modprobe aha152x nothing occurs
all times it says:
Nov 27 09:22:03 localhost kernel: aha152x: BIOS test: passed, 1 controller(s) configured Nov 27 09:22:05 localhost kernel: aha152x: resetting bus... Nov 27 09:22:05 localhost kernel: aha152x3: vital data: rev=1, io=0x140
(0x140/0x140), irq
=9, scsiid=7, reconnect=enabled, parity=enabled, synchronous=disabled, delay=1000, extende
d translation=disabled
Nov 27 09:22:05 localhost kernel: aha152x3: trying software interrupt, lost. Nov 27 09:22:05 localhost kernel: aha152x3: irq 9 possibly wrong.
Please verify.
Nicola
PS: I was missing a couple of infos: I'm using Fedora Core 2 distro and kernel 2.6.9-1.6_FC2 (but I'm going to recompile the 2.6.9 kernel + patch 2.6.10-rc2).
Signature · 1 line
Nicola Ricciarelli <[email protected]>