Skip to contentSkip to conversation

ERROR: [PATCH] moxa: Update status of Moxa Smartio driver

DISCUSSION Alan Cox 2 participants 4 messages Jan 9, 2005 – Jan 10, 2005 1 message not in the archive

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): [email protected]

Alan Cox

author
#1 lore raw

This changeset is incorrect. The "1.8" version is for the Moxa mxser driver. Moxa haven't released any 2.6 driver for the ancient "smartio" hardware. (Checked this while fixing mxser).

In the mxser case that change and update has now been done.

Please revert this changeset.

Alan (with tty layer hat on)

Quoted 12 lines

ChangeSet 1.2371, 2005/01/08 14:09:24-08:00, [email protected]

(quoted diff) +10 -0
+***NOTE*** - The driver included in the kernel is not maintained by Moxa.  They
+have a version 1.8 driver available from:
+
+http://www.moxa.com
+
+that works with 2.6 kernels.  Currently, Moxa has no plans to have their updated
+driver merged into the kernel.
+
+James Nelson <[email protected]> - 12-12-2004
+
#2 lore raw
Quoted 11 lines · Alan Cox

This changeset is incorrect. The "1.8" version is for the Moxa mxser driver. Moxa haven't released any 2.6 driver for the ancient "smartio" hardware. (Checked this while fixing mxser).

In the mxser case that change and update has now been done.

Please revert this changeset.

Alan (with tty layer hat on)

Actually, per

http://web4.moxa.com/support/download.asp#mxser.tgz

the mxser driver supports the smartio boards - and from the 1.8 mxser package readme.txt:

The Smartio/Industio/UPCI family Linux driver supports following multiport boards.

    - 2 ports multiport board
        CP-102U, CP-102UL
        CP-132U-I, CP-132UL,
        CP-132, CP-132I, CP132S, CP-132IS,
        CI-132, CI-132I, CI-132IS,
        (C102H, C102HI, C102HIS, C102P, CP-102, CP-102S)


    - 4 ports multiport board
        CP-104UL, CP-104JU,
        CP-134U, CP-134U-I
        C104H/PCI, C104HS/PCI,
        CP-114, CP-114I, CP-114S, CP-114IS,
        C104H, C104HS,
        CI-104J, CI-104JS
        CI-134, CI-134I, CI-134IS,
        (C114HI, CT-114I, C104P)


    - 8 ports multiport board
        CP-118U
        CP-168U,
        C168H/PCI,
        C168H, C168HS,
        (C168P)

and Documentation/moxa-smartio says:

The Smartio family Linux driver, Ver. 1.1, supports following multiport boards.

    -C104P/H/HS, C104H/PCI, C104HS/PCI, CI-104J 4 port multiport board.
    -C168P/H/HS, C168H/PCI 8 port multiport board.

Granted, the mxser driver supports many more boards - but it also supports the boards mentioned in the smartio driver.

This just means that the smartio driver needs to be marked "obsolete" if mxser is merged. Not that I'm complaining - it's a bit of a mess.

Jim

Quoted 23 lines
Quoted 4 lines

ChangeSet 1.2371, 2005/01/08 14:09:24-08:00, [email protected]

Review

Quoted 10 lines
(quoted diff) +10 -0
+***NOTE*** - The driver included in the kernel is not maintained by Moxa.  They
+have a version 1.8 driver available from:
+
+http://www.moxa.com
+
+that works with 2.6 kernels.  Currently, Moxa has no plans to have their updated
+driver merged into the kernel.
+
+James Nelson <[email protected]> - 12-12-2004
+

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

author
#3 lore raw
Quoted 2 lines · Jim Nelson

the mxser driver supports the smartio boards - and from the 1.8 mxser package readme.txt:

Read the code 8)

Quoted 3 lines
         (C102H, C102HI, C102HIS, C102P, CP-102, CP-102S)
         (C114HI, CT-114I, C104P)
         (C168P)

Note the brackets - they are not supported. I'm not sure what Moxa were trying to indicate but I have actually pulled all their latest drivers (and merged mxser). Their last moxa driver is for old old kernels.

Alan

#4 lore raw
Quoted 8 lines · Alan Cox
Quoted 1 line · Jim Nelson

the mxser driver supports the smartio boards - and from the 1.8 mxser package readme.txt:

Read the code 8)

</foot-in-mouth> I was going off of what their website said was the proper driver.
Oops.

Please revert the patch, Linus.

Jim