ERROR: [PATCH] moxa: Update status of Moxa Smartio driver
This changeset is incorrect. The "1.8" version is for the Moxa mxser driver. Moxa haven't released any 2.6 driver for the ancient "smartio" hardware. (Checked this while fixing mxser).
In the mxser case that change and update has now been done.
Please revert this changeset.
Alan (with tty layer hat on)
Quoted 12 lines
ChangeSet 1.2371, 2005/01/08 14:09:24-08:00, [email protected]
(quoted diff) +10
-0+***NOTE*** - The driver included in the kernel is not maintained by Moxa. They +have a version 1.8 driver available from: + +http://www.moxa.com + +that works with 2.6 kernels. Currently, Moxa has no plans to have their updated +driver merged into the kernel. + +James Nelson <[email protected]> - 12-12-2004 +
Quoted 11 lines · Alan Cox
This changeset is incorrect. The "1.8" version is for the Moxa mxser driver. Moxa haven't released any 2.6 driver for the ancient "smartio" hardware. (Checked this while fixing mxser).
In the mxser case that change and update has now been done.
Please revert this changeset.
Alan (with tty layer hat on)
Actually, per
http://web4.moxa.com/support/download.asp#mxser.tgz
the mxser driver supports the smartio boards - and from the 1.8 mxser package readme.txt:
The Smartio/Industio/UPCI family Linux driver supports following multiport boards.
- 2 ports multiport board
CP-102U, CP-102UL
CP-132U-I, CP-132UL,
CP-132, CP-132I, CP132S, CP-132IS,
CI-132, CI-132I, CI-132IS,
(C102H, C102HI, C102HIS, C102P, CP-102, CP-102S)
- 4 ports multiport board
CP-104UL, CP-104JU,
CP-134U, CP-134U-I
C104H/PCI, C104HS/PCI,
CP-114, CP-114I, CP-114S, CP-114IS,
C104H, C104HS,
CI-104J, CI-104JS
CI-134, CI-134I, CI-134IS,
(C114HI, CT-114I, C104P)
- 8 ports multiport board
CP-118U
CP-168U,
C168H/PCI,
C168H, C168HS,
(C168P)and Documentation/moxa-smartio says:
The Smartio family Linux driver, Ver. 1.1, supports following multiport boards.
-C104P/H/HS, C104H/PCI, C104HS/PCI, CI-104J 4 port multiport board.
-C168P/H/HS, C168H/PCI 8 port multiport board.Granted, the mxser driver supports many more boards - but it also supports the boards mentioned in the smartio driver.
This just means that the smartio driver needs to be marked "obsolete" if mxser is merged. Not that I'm complaining - it's a bit of a mess.
Jim
Quoted 23 lines
Quoted 4 lines
ChangeSet 1.2371, 2005/01/08 14:09:24-08:00, [email protected]
Review
Quoted 10 lines
(quoted diff) +10
-0+***NOTE*** - The driver included in the kernel is not maintained by Moxa. They +have a version 1.8 driver available from: + +http://www.moxa.com + +that works with 2.6 kernels. Currently, Moxa has no plans to have their updated +driver merged into the kernel. + +James Nelson <[email protected]> - 12-12-2004 +-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Quoted 2 lines · Jim Nelson
the mxser driver supports the smartio boards - and from the 1.8 mxser package readme.txt:
Read the code 8)
Quoted 3 lines
(C102H, C102HI, C102HIS, C102P, CP-102, CP-102S)
(C114HI, CT-114I, C104P)
(C168P)Note the brackets - they are not supported. I'm not sure what Moxa were trying to indicate but I have actually pulled all their latest drivers (and merged mxser). Their last moxa driver is for old old kernels.
Alan
Quoted 8 lines · Alan Cox
Quoted 1 line · Jim Nelson
the mxser driver supports the smartio boards - and from the 1.8 mxser package readme.txt:
Read the code 8)
</foot-in-mouth> I was going off of what their website said was the proper driver.
Oops.
Please revert the patch, Linus.
Jim