Skip to contentSkip to conversation

Billionton CF card (bt950)

Bluez-users Sebastian Henschel 3 participants 4 messages Mar 7, 2005 – Mar 10, 2005 Bluetooth drivers

lore
Share & tools
lore
#0 lore raw

howdy folks...

i have a CF card from Billionton here with the P/N CFBT02-B2. cardctl ident reveals:
product info: "Compact Flash", "Bluetooth Card", "", ""
manfid: 0x0279, 0x950b
function: 2 (serial)

/etc/pcmcia/bluetooth.conf reads:
card "Billionton Bluetooth Card"
version "Compact Flash", "Bluetooth Card"
bind "serial_cs"

having read in the archives, bt950_cs and btuart_cs should not be used nowadays, but serial_cs with the combination of hciattach. you should forget about the other two, right?

first, i tried to get it going in an Apple Powerbook (Alu, 2nd gen) with kernel 2.6.11. but as others with similar cards (i believe the card from Socket mentioned here
http://sourceforge.net/mailarchive/forum.php?thread_id=6735172&forum_id=1883
to be more or less the same), it does not work. it is believed to have something to do with the serial support in 2.6 kernels.

then, i tried with the machine the card shall actually work with:
Zaurus SL-5500 with OpenZaurus 3.5.2, kernel 2.4.18-rmk7-pxa3-embedix. unfortunately, the situation isn't any better. so far, serial_cs recognizes the device:

    ttyS03 at port 0xc48602f8 (irq=35) is a 16C950/954

but using hciattach with type "csr" always fails with
Initialization timed out.

trying with type "ericsson" and all kinds of speeds, it fails when issueing "hciconfig hci0 up" with the message
Can't init device hci0. Connection timet out(110)
and the kernel log is filled to message
nearly identical to these seen on the Powerbook with kernel 2.6:
h4_recv: Unknown HCI packet type 00
h4_recv: Unknown HCI packet type 00
h4_recv: Unknown HCI packet type 80
h4_recv: Unknown HCI packet type f8
h4_recv: Unknown HCI packet type 00
h4_recv: Unknown HCI packet type 78

the other types have not been tried on the Zaurus, but on the Powerbook. bt950_cs and btuart_cs have also been tried on the Zaurus, with different, but somewhat similar error messages (replace h4_recv by btuart_cs for instance).

so, it does not seem to be a problem of 2.6 only. 2.4 does not work, too. well, i fear this will be nothing more than a "metoo". at least, others are warned about this specific card. :)

thanks,
Sebastian

Signature · 4 lines
::: .O.
::: ..O
::: OOO
::: lynx -source http://www.kodeaffe.de/shensche.pub | gpg --import
maintainer
#1 lore raw

Hi Sebastian,

Quoted 45 lines

howdy folks...

i have a CF card from Billionton here with the P/N CFBT02-B2. cardctl ident reveals:
product info: "Compact Flash", "Bluetooth Card", "", ""
manfid: 0x0279, 0x950b
function: 2 (serial)

/etc/pcmcia/bluetooth.conf reads:
card "Billionton Bluetooth Card"
version "Compact Flash", "Bluetooth Card"
bind "serial_cs"

having read in the archives, bt950_cs and btuart_cs should not be used nowadays, but serial_cs with the combination of hciattach. you should forget about the other two, right?

first, i tried to get it going in an Apple Powerbook (Alu, 2nd gen) with kernel 2.6.11. but as others with similar cards (i believe the card from Socket mentioned here
http://sourceforge.net/mailarchive/forum.php?thread_id=6735172&forum_id=1883
to be more or less the same), it does not work. it is believed to have something to do with the serial support in 2.6 kernels.

then, i tried with the machine the card shall actually work with:
Zaurus SL-5500 with OpenZaurus 3.5.2, kernel 2.4.18-rmk7-pxa3-embedix. unfortunately, the situation isn't any better. so far, serial_cs recognizes the device:

    ttyS03 at port 0xc48602f8 (irq=35) is a 16C950/954

but using hciattach with type "csr" always fails with
Initialization timed out.

trying with type "ericsson" and all kinds of speeds, it fails when issueing "hciconfig hci0 up" with the message
Can't init device hci0. Connection timet out(110)
and the kernel log is filled to message
nearly identical to these seen on the Powerbook with kernel 2.6:
h4_recv: Unknown HCI packet type 00
h4_recv: Unknown HCI packet type 00
h4_recv: Unknown HCI packet type 80
h4_recv: Unknown HCI packet type f8
h4_recv: Unknown HCI packet type 00
h4_recv: Unknown HCI packet type 78

Quoted 8 lines

the other types have not been tried on the Zaurus, but on the Powerbook. bt950_cs and btuart_cs have also been tried on the Zaurus, with different, but somewhat similar error messages (replace h4_recv by btuart_cs for instance).

so, it does not seem to be a problem of 2.6 only. 2.4 does not work, too. well, i fear this will be nothing more than a "metoo". at least, others are warned about this specific card. :)

maybe this card is using BCSP or a different initial baudrate.

Regards

Marcel

-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users

#2 lore raw

hi!

thanks for your and Erwin's hint...

Quoted 49 lines · Marcel Holtmann
Quoted 49 lines

i have a CF card from Billionton here with the P/N CFBT02-B2. cardctl ident reveals:
product info: "Compact Flash", "Bluetooth Card", "", ""
manfid: 0x0279, 0x950b
function: 2 (serial)

/etc/pcmcia/bluetooth.conf reads:
card "Billionton Bluetooth Card"
version "Compact Flash", "Bluetooth Card"
bind "serial_cs"

having read in the archives, bt950_cs and btuart_cs should not be used nowadays, but serial_cs with the combination of hciattach. you should forget about the other two, right?

first, i tried to get it going in an Apple Powerbook (Alu, 2nd gen) with kernel 2.6.11. but as others with similar cards (i believe the card from Socket mentioned here
http://sourceforge.net/mailarchive/forum.php?thread_id=6735172&forum_id=1883
to be more or less the same), it does not work. it is believed to have something to do with the serial support in 2.6 kernels.

then, i tried with the machine the card shall actually work with:
Zaurus SL-5500 with OpenZaurus 3.5.2, kernel 2.4.18-rmk7-pxa3-embedix. unfortunately, the situation isn't any better. so far, serial_cs recognizes the device:

    ttyS03 at port 0xc48602f8 (irq=35) is a 16C950/954

but using hciattach with type "csr" always fails with
Initialization timed out.

trying with type "ericsson" and all kinds of speeds, it fails when issueing "hciconfig hci0 up" with the message
Can't init device hci0. Connection timet out(110)
and the kernel log is filled to message
nearly identical to these seen on the Powerbook with kernel 2.6:
h4_recv: Unknown HCI packet type 00
h4_recv: Unknown HCI packet type 00
h4_recv: Unknown HCI packet type 80
h4_recv: Unknown HCI packet type f8
h4_recv: Unknown HCI packet type 00
h4_recv: Unknown HCI packet type 78

the other types have not been tried on the Zaurus, but on the Powerbook. bt950_cs and btuart_cs have also been tried on the Zaurus, with different, but somewhat similar error messages (replace h4_recv by btuart_cs for instance).

Quoted 5 lines
Quoted 3 lines

so, it does not seem to be a problem of 2.6 only. 2.4 does not work, too. well, i fear this will be nothing more than a "metoo". at least, others are warned about this specific card. :)

maybe this card is using BCSP or a different initial baudrate.

sorry to say that, but this works neither on the Powerbook, nor on the Zaurus.
hciattach fails with
BCSP initialization timed out
for every baudrate.

cheers,
Sebastian

Signature · 4 lines
::: .O.
::: ..O
::: OOO
::: lynx -source http://www.kodeaffe.de/shensche.pub | gpg --import
#3 lore raw
In reply to Sebastian Henschel

Am Mon, den 07.03.2005 schrieb Sebastian Henschel um 16:34:

Quoted 8 lines

howdy folks...

i have a CF card from Billionton here with the P/N CFBT02-B2. cardctl ident reveals:
product info: "Compact Flash", "Bluetooth Card", "", ""
manfid: 0x0279, 0x950b
function: 2 (serial)

Quoted 8 lines

/etc/pcmcia/bluetooth.conf reads:
card "Billionton Bluetooth Card"
version "Compact Flash", "Bluetooth Card"
bind "serial_cs"

having read in the archives, bt950_cs and btuart_cs should not be used nowadays, but serial_cs with the combination of hciattach. you should forget about the other two, right?

Hi,
your card has the same manufacturer/device id as the Conceptronic CBT100C. Try serial_cs and "hciattach ttyS.. bcsp"

Regards,
Erwin

-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users