Billionton CF card (bt950)
howdy folks...
i have a CF card from Billionton here with the P/N CFBT02-B2. cardctl ident reveals:
product info: "Compact Flash", "Bluetooth Card", "", ""
manfid: 0x0279, 0x950b
function: 2 (serial)
/etc/pcmcia/bluetooth.conf reads:
card "Billionton Bluetooth Card"
version "Compact Flash", "Bluetooth Card"
bind "serial_cs"
having read in the archives, bt950_cs and btuart_cs should not be used nowadays, but serial_cs with the combination of hciattach. you should forget about the other two, right?
first, i tried to get it going in an Apple Powerbook (Alu, 2nd gen) with kernel 2.6.11. but as others with similar cards (i believe the card from Socket mentioned here
http://sourceforge.net/mailarchive/forum.php?thread_id=6735172&forum_id=1883
to be more or less the same), it does not work. it is believed to have something to do with the serial support in 2.6 kernels.
then, i tried with the machine the card shall actually work with:
Zaurus SL-5500 with OpenZaurus 3.5.2, kernel 2.4.18-rmk7-pxa3-embedix. unfortunately, the situation isn't any better. so far, serial_cs recognizes the device:
ttyS03 at port 0xc48602f8 (irq=35) is a 16C950/954
but using hciattach with type "csr" always fails with
Initialization timed out.
trying with type "ericsson" and all kinds of speeds, it fails when issueing "hciconfig hci0 up" with the message
Can't init device hci0. Connection timet out(110)
and the kernel log is filled to message
nearly identical to these seen on the Powerbook with kernel 2.6:
h4_recv: Unknown HCI packet type 00
h4_recv: Unknown HCI packet type 00
h4_recv: Unknown HCI packet type 80
h4_recv: Unknown HCI packet type f8
h4_recv: Unknown HCI packet type 00
h4_recv: Unknown HCI packet type 78
the other types have not been tried on the Zaurus, but on the Powerbook. bt950_cs and btuart_cs have also been tried on the Zaurus, with different, but somewhat similar error messages (replace h4_recv by btuart_cs for instance).
so, it does not seem to be a problem of 2.6 only. 2.4 does not work, too. well, i fear this will be nothing more than a "metoo". at least, others are warned about this specific card. :)
thanks,
Sebastian
Signature · 4 lines
::: .O. ::: ..O ::: OOO ::: lynx -source http://www.kodeaffe.de/shensche.pub | gpg --import
Marcel Holtmann
maintainerHi Sebastian,
Quoted 45 lines
howdy folks...
i have a CF card from Billionton here with the P/N CFBT02-B2. cardctl ident reveals:
product info: "Compact Flash", "Bluetooth Card", "", ""
manfid:0x0279,0x950b
function: 2 (serial)
/etc/pcmcia/bluetooth.confreads:
card "Billionton Bluetooth Card"
version "Compact Flash", "Bluetooth Card"
bind "serial_cs"having read in the archives,
bt950_csandbtuart_csshould not be used nowadays, butserial_cswith the combination of hciattach. you should forget about the other two, right?first, i tried to get it going in an Apple Powerbook (Alu, 2nd gen) with kernel 2.6.11. but as others with similar cards (i believe the card from Socket mentioned here
http://sourceforge.net/mailarchive/forum.php?thread_id=6735172&forum_id=1883
to be more or less the same), it does not work. it is believed to have something to do with the serial support in 2.6 kernels.then, i tried with the machine the card shall actually work with:
Zaurus SL-5500 with OpenZaurus 3.5.2, kernel 2.4.18-rmk7-pxa3-embedix. unfortunately, the situation isn't any better. so far,serial_csrecognizes the device:ttyS03 at port 0xc48602f8 (irq=35) is a 16C950/954but using hciattach with type "csr" always fails with
Initialization timed out.trying with type "ericsson" and all kinds of speeds, it fails when issueing "hciconfig hci0 up" with the message
Can't init device hci0. Connection timet out(110)
and the kernel log is filled to message
nearly identical to these seen on the Powerbook with kernel 2.6:
h4_recv: Unknown HCI packet type 00
h4_recv: Unknown HCI packet type 00
h4_recv: Unknown HCI packet type 80
h4_recv: Unknown HCI packet type f8
h4_recv: Unknown HCI packet type 00
h4_recv: Unknown HCI packet type 78
Quoted 8 lines
the other types have not been tried on the Zaurus, but on the Powerbook.
bt950_csandbtuart_cshave also been tried on the Zaurus, with different, but somewhat similar error messages (replaceh4_recvbybtuart_csfor instance).so, it does not seem to be a problem of 2.6 only. 2.4 does not work, too. well, i fear this will be nothing more than a "metoo". at least, others are warned about this specific card. :)
maybe this card is using BCSP or a different initial baudrate.
Regards
Marcel
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
Am Mon, den 07.03.2005 schrieb Sebastian Henschel um 16:34:
Quoted 8 lines
howdy folks...
i have a CF card from Billionton here with the P/N CFBT02-B2. cardctl ident reveals:
product info: "Compact Flash", "Bluetooth Card", "", ""
manfid:0x0279,0x950b
function: 2 (serial)
Quoted 8 lines
/etc/pcmcia/bluetooth.confreads:
card "Billionton Bluetooth Card"
version "Compact Flash", "Bluetooth Card"
bind "serial_cs"having read in the archives,
bt950_csandbtuart_csshould not be used nowadays, butserial_cswith the combination of hciattach. you should forget about the other two, right?
Hi,
your card has the same manufacturer/device id as the Conceptronic CBT100C. Try serial_cs and "hciattach ttyS.. bcsp"
Regards,
Erwin
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
hi!
thanks for your and Erwin's hint...
Quoted 49 lines · Marcel Holtmann
Quoted 49 lines
i have a CF card from Billionton here with the P/N CFBT02-B2. cardctl ident reveals:
product info: "Compact Flash", "Bluetooth Card", "", ""
manfid:0x0279,0x950b
function: 2 (serial)
/etc/pcmcia/bluetooth.confreads:
card "Billionton Bluetooth Card"
version "Compact Flash", "Bluetooth Card"
bind "serial_cs"having read in the archives,
bt950_csandbtuart_csshould not be used nowadays, butserial_cswith the combination of hciattach. you should forget about the other two, right?first, i tried to get it going in an Apple Powerbook (Alu, 2nd gen) with kernel 2.6.11. but as others with similar cards (i believe the card from Socket mentioned here
http://sourceforge.net/mailarchive/forum.php?thread_id=6735172&forum_id=1883
to be more or less the same), it does not work. it is believed to have something to do with the serial support in 2.6 kernels.then, i tried with the machine the card shall actually work with:
Zaurus SL-5500 with OpenZaurus 3.5.2, kernel 2.4.18-rmk7-pxa3-embedix. unfortunately, the situation isn't any better. so far,serial_csrecognizes the device:ttyS03 at port 0xc48602f8 (irq=35) is a 16C950/954but using hciattach with type "csr" always fails with
Initialization timed out.trying with type "ericsson" and all kinds of speeds, it fails when issueing "hciconfig hci0 up" with the message
Can't init device hci0. Connection timet out(110)
and the kernel log is filled to message
nearly identical to these seen on the Powerbook with kernel 2.6:
h4_recv: Unknown HCI packet type 00
h4_recv: Unknown HCI packet type 00
h4_recv: Unknown HCI packet type 80
h4_recv: Unknown HCI packet type f8
h4_recv: Unknown HCI packet type 00
h4_recv: Unknown HCI packet type 78the other types have not been tried on the Zaurus, but on the Powerbook.
bt950_csandbtuart_cshave also been tried on the Zaurus, with different, but somewhat similar error messages (replaceh4_recvbybtuart_csfor instance).
Quoted 5 lines
Quoted 3 lines
so, it does not seem to be a problem of 2.6 only. 2.4 does not work, too. well, i fear this will be nothing more than a "metoo". at least, others are warned about this specific card. :)
maybe this card is using BCSP or a different initial baudrate.
sorry to say that, but this works neither on the Powerbook, nor on the Zaurus.
hciattach fails with
BCSP initialization timed out
for every baudrate.
cheers,
Sebastian
Signature · 4 lines
::: .O. ::: ..O ::: OOO ::: lynx -source http://www.kodeaffe.de/shensche.pub | gpg --import