Skip to contentSkip to conversation

Multiple Links

LARTC hare ram 4 participants 4 messages Sep 18, 2003 – Apr 14, 2005

lore
Share & tools
lore

hare ram

author
#0 lore raw

Hi all

Iam planning to deploy Multiple Links
using RH 9.0/ PIII 500Mhz/512MB RAM
With all Patches related to Route and rest Mentioned in nano.txt

Iam Running BGP 4 with all the ISP, but iam not doing Load balancing the Links
Each Link have specific application and specific users.

Eth0 is connected to Local Net

eth1- ISP1
eth2- ISP2
eth3- ISP3

Now i want to make Specific Routes

x.x.x.x should go to ISP 1
y.y.y.y should go to ISP 2
z.z.z.z should go to ISP 3

x, y, z, and other block of IP's are my IP range of IP's

If the x.x.x.1 trying to reach y.y.y.1, it should identify this route internally only, and it should connect directly from eth0 to PC of y.y.y.1 rather going to ISP 1 and come back, How can make it this ?

same situation if y.y.y.1 want to contact x.x.x.1 it should take decision on Eth0 only, rather going out come back from ISP.

any help will be appreciated

hare

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#1 lore raw

Hi,

I am not sure to understand what you want to do.

Do you want to route packets according to their ip source ?

It is possible to do that with the "ip" command

Regards

Quoted 42 lines

-----Message d'origine-----
De : [email protected] [mailto:[email protected]]De la part de hare ram
Envoyé : jeudi 18 septembre 2003 09:37
À : [email protected]
Objet : [LARTC] Multiple Links

Hi all

Iam planning to deploy Multiple Links
using RH 9.0/ PIII 500Mhz/512MB RAM
With all Patches related to Route and rest Mentioned in nano.txt

Iam Running BGP 4 with all the ISP, but iam not doing Load balancing the Links
Each Link have specific application and specific users.

Eth0 is connected to Local Net

eth1- ISP1
eth2- ISP2
eth3- ISP3

Now i want to make Specific Routes

x.x.x.x should go to ISP 1
y.y.y.y should go to ISP 2
z.z.z.z should go to ISP 3

x, y, z, and other block of IP's are my IP range of IP's

If the x.x.x.1 trying to reach y.y.y.1, it should identify this route internally only, and it should connect directly from eth0 to PC of y.y.y.1 rather going to ISP 1 and come back, How can make it this ?

same situation if y.y.y.1 want to contact x.x.x.1 it should take decision on
Eth0 only, rather going out come back from ISP.

Quoted 8 lines

any help will be appreciated

hare

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#3 lore raw
In reply to hare ram

You may want to read my tutorial
http://routeskeeper.sourceforge.net/Routeskeeper/MultihomingWithLinux.html
And feel free to ask your questions

Quoted 11 lines · Paulo Andre

I have two ISP links that I am trying to firewall through a Linux Server, I have been following
http://lartc.org/howto/lartc.rpdb.multiple-links.html
and I can not seem to get it working.

Do you have to NAT the incoming packets for this to work correctly?

_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc

_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc