Multiple Links
Hi all
Iam planning to deploy Multiple Links
using RH 9.0/ PIII 500Mhz/512MB RAM
With all Patches related to Route and rest Mentioned in nano.txt
Iam Running BGP 4 with all the ISP, but iam not doing Load balancing the Links
Each Link have specific application and specific users.
Eth0 is connected to Local Net
eth1- ISP1
eth2- ISP2
eth3- ISP3
Now i want to make Specific Routes
x.x.x.x should go to ISP 1
y.y.y.y should go to ISP 2
z.z.z.z should go to ISP 3
x, y, z, and other block of IP's are my IP range of IP's
If the x.x.x.1 trying to reach y.y.y.1, it should identify this route internally only, and it should connect directly from eth0 to PC of y.y.y.1 rather going to ISP 1 and come back, How can make it this ?
same situation if y.y.y.1 want to contact x.x.x.1 it should take decision on Eth0 only, rather going out come back from ISP.
any help will be appreciated
hare
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Hi,
I am not sure to understand what you want to do.
Do you want to route packets according to their ip source ?
It is possible to do that with the "ip" command
Regards
Quoted 42 lines
-----Message d'origine-----
De : [email protected] [mailto:[email protected]]De la part de hare ram
Envoyé : jeudi 18 septembre 2003 09:37
À : [email protected]
Objet : [LARTC] Multiple LinksHi all
Iam planning to deploy Multiple Links
using RH 9.0/ PIII 500Mhz/512MB RAM
With all Patches related to Route and rest Mentioned in nano.txtIam Running BGP 4 with all the ISP, but iam not doing Load balancing the Links
Each Link have specific application and specific users.Eth0 is connected to Local Net
eth1- ISP1
eth2- ISP2
eth3- ISP3Now i want to make Specific Routes
x.x.x.x should go to ISP 1
y.y.y.y should go to ISP 2
z.z.z.z should go to ISP 3x, y, z, and other block of IP's are my IP range of IP's
If the x.x.x.1 trying to reach y.y.y.1, it should identify this route internally only, and it should connect directly from eth0 to PC of y.y.y.1 rather going to ISP 1 and come back, How can make it this ?
same situation if y.y.y.1 want to contact x.x.x.1 it should take decision on
Eth0 only, rather going out come back from ISP.
Quoted 8 lines
any help will be appreciated
hare
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
I have two ISP links that I am trying to firewall through a Linux Server, I have been following
http://lartc.org/howto/lartc.rpdb.multiple-links.html
and I can not seem to get it working.
Do you have to NAT the incoming packets for this to work correctly?
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
You may want to read my tutorial
http://routeskeeper.sourceforge.net/Routeskeeper/MultihomingWithLinux.html
And feel free to ask your questions
Quoted 11 lines · Paulo Andre
I have two ISP links that I am trying to firewall through a Linux Server, I have been following
http://lartc.org/howto/lartc.rpdb.multiple-links.html
and I can not seem to get it working.Do you have to NAT the incoming packets for this to work correctly?
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc