Kdump: Disabling PCI interrupts in capture kernel
Quoting Greg KH <[email protected]>:
Quoted 7 lines · Vivek Goyal
Quoted 3 lines
Hi,
In kdump, sometimes, general driver initialization issues seems to be
cropping
Quoted 1 line
in second kernel due to devices not being shutdown during crash and these
Quoted 7 lines
Quoted 1 line
devices are sending interrupts while second kernel is booting and drivers
are
Quoted 1 line
not expecting any interrupts yet.
What are the errors you are seeing?
How would the drivers be able to be getting interrupts delivered to them if they haven't registered the irq handler yet?
Probably the boot log with error messages could have been inlined instead of putting as attachement. This is from attachement in Vievk's post
irq 11: nobody cared (try booting with the "irqpoll" option.
[<c103a3ef>] __report_bad_irq+0x2a/0x8d [<c1039c28>] handle_IRQ_event+0x39/0x6d [<c103a4eb>] note_interrupt+0x7f/0xe4 [<c1039dc5>] __do_IRQ+0x169/0x194 [<c1004cc6>] do_IRQ+0x1b/0x28 [<c1003256>] common_interrupt+0x1a/0x20 [<c101d61b>] __do_softirq+0x2b/0x88 [<c101d69e>] do_softirq+0x26/0x2a [<c101d759>] irq_exit+0x33/0x35 [<c1004ccb>] do_IRQ+0x20/0x28 [<c1003256>] common_interrupt+0x1a/0x20 [<c1018916>] release_console_sem+0x43/0xf6 [<c101875f>] vprintk+0x16c/0x277 [<c1074dd8>] d_lookup+0x23/0x46 [<c10748ac>] d_alloc+0x136/0x1a6 [<c10185ef>] printk+0x17/0x1b [<c120f33f>] hub_probe+0xa0/0x168 [<c1096dd1>] sysfs_new_dirent+0x1f/0x64 [<c120d37f>] usb_probe_interface+0x59/0x71 [<c116c9b2>] driver_probe_device+0x2f/0xa7 [<c116ca2a>] __device_attach+0x0/0x5 [<c116c259>] bus_for_each_drv+0x58/0x78 [<c116ca8f>] device_attach+0x60/0x64 [<c116ca2a>] __device_attach+0x0/0x5 [<c116c383>] bus_add_device+0x29/0xa6 [<c116f9c7>] device_pm_add+0x56/0x9c [<c116b7c3>] device_add+0xc5/0x14a [<c121557e>] usb_set_configuration+0x346/0x528 [<c120fa47>] usb_new_device+0xab/0x1be [<c120007b>] ohci_iso_recv_set_channel_mask+0x3/0xc6 [<c12124e1>] register_root_hub+0xaf/0x162 [<c12133bf>] usb_add_hcd+0x172/0x396 [<c1217bce>] usb_hcd_pci_probe+0x26e/0x375 [<c10284e7>] __call_usermodehelper+0x0/0x61 [<c110cbe4>] pci_device_probe_static+0x40/0x54 [<c110cc27>] __pci_device_probe+0x2f/0x42 [<c110cc63>] pci_device_probe+0x29/0x47 [<c116c9b2>] driver_probe_device+0x2f/0xa7 [<c116ca93>] __driver_attach+0x0/0x43 [<c116cad4>] __driver_attach+0x41/0x43 [<c116c1c2>] bus_for_each_dev+0x5a/0x7a [<c116cafc>] driver_attach+0x26/0x2a [<c116ca93>] __driver_attach+0x0/0x43 [<c116c5cb>] bus_add_driver+0x6b/0xa5 [<c110ce97>] pci_register_driver+0x5e/0x7c [<c14246f5>] init+0x1d/0x25 [<c140c7ed>] do_initcalls+0x54/0xb6 [<c100029c>] init+0x0/0x10c [<c100029c>] init+0x0/0x10c [<c10002c6>] init+0x2a/0x10c [<c1001348>] kernel_thread_helper+0x0/0xb [<c100134d>] kernel_thread_helper+0x5/0xb
handlers:
[<c11e3421>] (ahd_linux_isr+0x0/0x284)
Disabling IRQ #11
Thanks
Maneesh
Signature · 6 lines
Maneesh Soni IBM Linux Technology Center IBM India Software Labs, Bangalore, India Ph. 91-80-25044990 email: [email protected]