Skip to contentSkip to conversation

Kdump: Disabling PCI interrupts in capture kernel

Fastboot Maneesh Soni 1 participant 1 message Jun 4, 2005

lore
Share & tools
lore
#0 lore raw

Quoting Greg KH <[email protected]>:

Quoted 7 lines · Vivek Goyal
Quoted 3 lines

Hi,

In kdump, sometimes, general driver initialization issues seems to be

cropping

Quoted 1 line

in second kernel due to devices not being shutdown during crash and these

Quoted 7 lines
Quoted 1 line

devices are sending interrupts while second kernel is booting and drivers

are

Quoted 1 line

not expecting any interrupts yet.

What are the errors you are seeing?
How would the drivers be able to be getting interrupts delivered to them if they haven't registered the irq handler yet?

Probably the boot log with error messages could have been inlined instead of putting as attachement. This is from attachement in Vievk's post

irq 11: nobody cared (try booting with the "irqpoll" option.

 [<c103a3ef>] __report_bad_irq+0x2a/0x8d 
 [<c1039c28>] handle_IRQ_event+0x39/0x6d 
 [<c103a4eb>] note_interrupt+0x7f/0xe4 
 [<c1039dc5>] __do_IRQ+0x169/0x194 
 [<c1004cc6>] do_IRQ+0x1b/0x28 
 [<c1003256>] common_interrupt+0x1a/0x20 
 [<c101d61b>] __do_softirq+0x2b/0x88 
 [<c101d69e>] do_softirq+0x26/0x2a 
 [<c101d759>] irq_exit+0x33/0x35 
 [<c1004ccb>] do_IRQ+0x20/0x28 
 [<c1003256>] common_interrupt+0x1a/0x20 
 [<c1018916>] release_console_sem+0x43/0xf6 
 [<c101875f>] vprintk+0x16c/0x277 
 [<c1074dd8>] d_lookup+0x23/0x46 
 [<c10748ac>] d_alloc+0x136/0x1a6 
 [<c10185ef>] printk+0x17/0x1b 
 [<c120f33f>] hub_probe+0xa0/0x168 
 [<c1096dd1>] sysfs_new_dirent+0x1f/0x64 
 [<c120d37f>] usb_probe_interface+0x59/0x71 
 [<c116c9b2>] driver_probe_device+0x2f/0xa7 
 [<c116ca2a>] __device_attach+0x0/0x5 
 [<c116c259>] bus_for_each_drv+0x58/0x78 
 [<c116ca8f>] device_attach+0x60/0x64 
 [<c116ca2a>] __device_attach+0x0/0x5 
 [<c116c383>] bus_add_device+0x29/0xa6 
 [<c116f9c7>] device_pm_add+0x56/0x9c 
 [<c116b7c3>] device_add+0xc5/0x14a 
 [<c121557e>] usb_set_configuration+0x346/0x528 
 [<c120fa47>] usb_new_device+0xab/0x1be 
 [<c120007b>] ohci_iso_recv_set_channel_mask+0x3/0xc6 
 [<c12124e1>] register_root_hub+0xaf/0x162 
 [<c12133bf>] usb_add_hcd+0x172/0x396 
 [<c1217bce>] usb_hcd_pci_probe+0x26e/0x375 
 [<c10284e7>] __call_usermodehelper+0x0/0x61 
 [<c110cbe4>] pci_device_probe_static+0x40/0x54 
 [<c110cc27>] __pci_device_probe+0x2f/0x42 
 [<c110cc63>] pci_device_probe+0x29/0x47 
 [<c116c9b2>] driver_probe_device+0x2f/0xa7 
 [<c116ca93>] __driver_attach+0x0/0x43 
 [<c116cad4>] __driver_attach+0x41/0x43 
 [<c116c1c2>] bus_for_each_dev+0x5a/0x7a 
 [<c116cafc>] driver_attach+0x26/0x2a 
 [<c116ca93>] __driver_attach+0x0/0x43 
 [<c116c5cb>] bus_add_driver+0x6b/0xa5 
 [<c110ce97>] pci_register_driver+0x5e/0x7c 
 [<c14246f5>] init+0x1d/0x25 
 [<c140c7ed>] do_initcalls+0x54/0xb6 
 [<c100029c>] init+0x0/0x10c 
 [<c100029c>] init+0x0/0x10c 
 [<c10002c6>] init+0x2a/0x10c 
 [<c1001348>] kernel_thread_helper+0x0/0xb 
 [<c100134d>] kernel_thread_helper+0x5/0xb 

handlers:
[<c11e3421>] (ahd_linux_isr+0x0/0x284)
Disabling IRQ #11

Thanks
Maneesh

Signature · 6 lines
Maneesh Soni
IBM Linux Technology Center
IBM India Software Labs,
Bangalore, India
Ph. 91-80-25044990
email: [email protected]