Skip to contentSkip to conversation

power consumption

Bluez-devel david 2 participants 2 messages Sep 23, 2005 Bluetooth drivers

lore
Share & tools
lore

david

author
#0 lore raw

Hi marcel,

The host send HCILL_GO_TO_SLEEP_IND commdand which is HCI Vendor-Specific Command to let bluetooth device(BRF6100) go to sleep through hcitool cmd. The bluetooth device will send HCILL_GO_TO_SLEEP_ACK to the host before it goes to sleep. The question is that where should I listen the response of bluetooth device.

Regards,

david

Quoted 18 lines

Hi David,

Quoted 9 lines

Does anybody use BRF6100 chip on the phone? I have read "BRF6100 singel-chip bluetooth RF device" date sheet to get the method of doing power management. It tells me that I can use the HCI command to take the BRF6100 from wake up to deep sleep. It seems that the date sheet doesn't tell me how to turn off/on the BRF6100(Is this called power-down/on mode?). I wonder to know what do ioctl(ctl, HCIDEVUP, hdev)) and ioctl(ctl, HCIDEVDOWN, hdev) do in bluez hcitool.c? Can it turn BRF6100 on or off? If yes, is the menu "bluetooth on/off" in mobilephone means that the power of BRF6100 is turned on/off?

the BRF6100 is a ROM chip, right? We need a special init routine for it and the last code I've seen was a mess, because it was Windows code. This needs a rewrite and I am only doing this if someone sends me a development kit with that I can test it. The other possibility is that someone cleans the code and sends me a patch for it.

Quoted 7 lines

If you need special support, then tell TI to open their documents and sponsor the BlueZ project with hardware. Or choose a chip manufacturer that is more open source friendly. For example CSR.

Regards

Marcel

-------------------------------------------------------
SF.Net email is sponsored by:
Tame your development challenges with Apache's Geronimo App Server. Download it for free - -and be entered to win a 42" plasma tv or your very own Sony(tm)PSP. Click here to play: http://sourceforge.net/geronimo.php
_______________________________________________
Bluez-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-devel

maintainer
#1 lore raw

Hi David,

Quoted 5 lines

The host send HCILL_GO_TO_SLEEP_IND commdand which is HCI Vendor-Specific Command to let bluetooth device(BRF6100) go to sleep through hcitool cmd. The bluetooth device will send HCILL_GO_TO_SLEEP_ACK to the host before it goes to sleep. The question is that where should I listen the response of bluetooth device.

I need more details on this and some hardware to play with.

Regards

Marcel

-------------------------------------------------------
SF.Net email is sponsored by:
Tame your development challenges with Apache's Geronimo App Server. Download it for free - -and be entered to win a 42" plasma tv or your very own Sony(tm)PSP. Click here to play: http://sourceforge.net/geronimo.php
_______________________________________________
Bluez-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-devel