power consumption
Hi marcel,
The host send HCILL_GO_TO_SLEEP_IND commdand which is HCI Vendor-Specific Command to let bluetooth device(BRF6100) go to sleep through hcitool cmd. The bluetooth device will send HCILL_GO_TO_SLEEP_ACK to the host before it goes to sleep. The question is that where should I listen the response of bluetooth device.
Regards,
david
Quoted 18 lines
Hi David,
Quoted 9 lines
Does anybody use BRF6100 chip on the phone? I have read "BRF6100 singel-chip bluetooth RF device" date sheet to get the method of doing power management. It tells me that I can use the HCI command to take the BRF6100 from wake up to deep sleep. It seems that the date sheet doesn't tell me how to turn off/on the BRF6100(Is this called power-down/on mode?). I wonder to know what do
ioctl(ctl, HCIDEVUP, hdev)) andioctl(ctl, HCIDEVDOWN, hdev)do in bluezhcitool.c? Can it turn BRF6100 on or off? If yes, is the menu "bluetooth on/off" in mobilephone means that the power of BRF6100 is turned on/off?the BRF6100 is a ROM chip, right? We need a special init routine for it and the last code I've seen was a mess, because it was Windows code. This needs a rewrite and I am only doing this if someone sends me a development kit with that I can test it. The other possibility is that someone cleans the code and sends me a patch for it.
Quoted 7 lines
If you need special support, then tell TI to open their documents and sponsor the BlueZ project with hardware. Or choose a chip manufacturer that is more open source friendly. For example CSR.
Regards
Marcel
-------------------------------------------------------
SF.Net email is sponsored by:
Tame your development challenges with Apache's Geronimo App Server. Download it for free - -and be entered to win a 42" plasma tv or your very own Sony(tm)PSP. Click here to play: http://sourceforge.net/geronimo.php
_______________________________________________
Bluez-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-devel
Marcel Holtmann
maintainerHi David,
Quoted 5 lines
The host send
HCILL_GO_TO_SLEEP_INDcommdand which is HCI Vendor-Specific Command to let bluetooth device(BRF6100) go to sleep through hcitool cmd. The bluetooth device will sendHCILL_GO_TO_SLEEP_ACKto the host before it goes to sleep. The question is that where should I listen the response of bluetooth device.
I need more details on this and some hardware to play with.
Regards
Marcel
-------------------------------------------------------
SF.Net email is sponsored by:
Tame your development challenges with Apache's Geronimo App Server. Download it for free - -and be entered to win a 42" plasma tv or your very own Sony(tm)PSP. Click here to play: http://sourceforge.net/geronimo.php
_______________________________________________
Bluez-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-devel