PATCH: Add enablebits support to the triflex driver
Signed-off-by Alan Cox <[email protected]>
drivers/scsi/pata_triflex.c +12 -1
@@ -44,10 +44,21 @@#include <linux/libata.h> #define DRV_NAME "pata_triflex" -#define DRV_VERSION "0.2" +#define DRV_VERSION "0.2.1"static void triflex_phy_reset (struct ata_port *ap) { +struct pci_dev *pdev =to_pci_dev (ap->host_set->dev); +static struct pci_bits triflex_enable_bits[] = { + {0x80 ,0x01 ,0x01 }, + {0x80 ,0x02 ,0x02 } + }; + +if (!pci_test_config_bits (pdev, &triflex_enable_bits[ap->hard_port_no])) { +ata_port_disable (ap); +printk (KERN_INFO "ata%u: port disabled. ignoring.\n" , ap->id); +return ; + } ap->cbl =ATA_CBL_PATA40 ;ata_port_probe (ap);ata_bus_reset (ap);
Jeff Garzik
Appliedapplied