Skip to contentSkip to conversation

PATCH: Add enablebits support to the triflex driver

PATCH Applied Alan Cox 2 participants 2 messages Nov 8, 2005 – Nov 9, 2005 SCSI

lore
Share & tools
lore

Alan Cox

author
#0 lore raw
drivers/scsi/pata_triflex.c +12 -1
diff -u --new-file --recursive --exclude-from /usr/src/exclude linux.vanilla-2.6.14-mm1/drivers/scsi/pata_triflex.c linux-2.6.14-mm1/drivers/scsi/pata_triflex.c
@@ -44,10 +44,21 @@
 #include <linux/libata.h>
 
 #define DRV_NAME "pata_triflex"
-#define DRV_VERSION "0.2"
+#define DRV_VERSION "0.2.1"
 
 static void triflex_phy_reset(struct ata_port *ap)
 {
+	struct pci_dev *pdev = to_pci_dev(ap->host_set->dev);
+	static struct pci_bits triflex_enable_bits[] = {
+		{ 0x80, 0x01, 0x01 },
+		{ 0x80, 0x02, 0x02 }
+	};
+
+	if (!pci_test_config_bits(pdev, &triflex_enable_bits[ap->hard_port_no])) {
+		ata_port_disable(ap);
+		printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id);
+		return;
+	}
 	ap->cbl = ATA_CBL_PATA40;
 	ata_port_probe(ap);
 	ata_bus_reset(ap);