Keyboard broken in 2.6.13.2
I have a system with a super-micro P8SCI motherboard.
The default FC2 kernel (2.6.10-1.771_FC2smp) works fine, but when I try to boot a 2.6.13.2 kernel, I see this error:
i8042.c: Can't read CTR while initializing i8042
If I hit the keyboard early in the boot, the system will just reboot.
If I wait a bit, then it will boot to a prompt, but no keyboard input is accepted.
Thanks,
Ben
Signature · 2 lines
Ben Greear <[email protected]> Candela Technologies Inc http://www.candelatech.com
Quoted 5 lines · Ben Greear
I have a system with a super-micro P8SCI motherboard.
The default FC2 kernel (2.6.10-1.771_FC2smp) works fine, but when I try to boot a 2.6.13.2 kernel, I see this error:
Quoted 7 lines
i8042.c: Can't read CTR while initializing i8042If I hit the keyboard early in the boot, the system will just reboot.
If I wait a bit, then it will boot to a prompt, but no keyboard input is accepted.
Does booting with "usb-handoff" boot option help any?
Signature · 1 line
Dmitry
Quoted 9 lines · Dmitry Torokhov
Quoted 7 lines · Ben Greear
I have a system with a super-micro P8SCI motherboard.
The default FC2 kernel (2.6.10-1.771_FC2smp) works fine, but when I try to boot a 2.6.13.2 kernel, I see this error:
i8042.c: Can't read CTR while initializing i8042
Quoted 8 lines
Quoted 5 lines
If I hit the keyboard early in the boot, the system will just reboot.
If I wait a bit, then it will boot to a prompt, but no keyboard input is accepted.
Does booting with "usb-handoff" boot option help any?
Not sure, but acpi=no works.
Thanks,
Ben
Signature · 2 lines
Ben Greear <[email protected]> Candela Technologies Inc http://www.candelatech.com
Quoted 11 lines · Ben Greear
I have a system with a super-micro P8SCI motherboard.
The default FC2 kernel (2.6.10-1.771_FC2smp) works fine, but when I try to boot a 2.6.13.2 kernel, I see this error:
i8042.c: Can't read CTR while initializing i8042If I hit the keyboard early in the boot, the system will just reboot.
If I wait a bit, then it will boot to a prompt, but no keyboard input is accepted.
Fedora Core has a patch (which was rejected upstream) which automatically fixes up problems with some BIOS USB emulation. On the base kernel you need to specify "usb-handoff" on the command line at boot. Another approach is to turn USB keyboard off in the BIOS.
Alan