Skip to contentSkip to conversation

Keyboard broken in 2.6.13.2

DISCUSSION Ben Greear 3 participants 4 messages Dec 2, 2005 – Dec 6, 2005

lore
Share & tools
lore

Ben Greear

author
#0 lore raw

I have a system with a super-micro P8SCI motherboard.

The default FC2 kernel (2.6.10-1.771_FC2smp) works fine, but when I try to boot a 2.6.13.2 kernel, I see this error:

i8042.c: Can't read CTR while initializing i8042

If I hit the keyboard early in the boot, the system will just reboot.

If I wait a bit, then it will boot to a prompt, but no keyboard input is accepted.

Thanks,
Ben

Signature · 2 lines
Ben Greear <[email protected]>
Candela Technologies Inc  http://www.candelatech.com
#1 lore raw
Quoted 5 lines · Ben Greear

I have a system with a super-micro P8SCI motherboard.

The default FC2 kernel (2.6.10-1.771_FC2smp) works fine, but when I try to boot a 2.6.13.2 kernel, I see this error:

Quoted 7 lines

i8042.c: Can't read CTR while initializing i8042

If I hit the keyboard early in the boot, the system will just reboot.

If I wait a bit, then it will boot to a prompt, but no keyboard input is accepted.

Does booting with "usb-handoff" boot option help any?

Signature · 1 line
Dmitry
author
#2 lore raw
Quoted 9 lines · Dmitry Torokhov
Quoted 7 lines · Ben Greear

I have a system with a super-micro P8SCI motherboard.

The default FC2 kernel (2.6.10-1.771_FC2smp) works fine, but when I try to boot a 2.6.13.2 kernel, I see this error:

i8042.c: Can't read CTR while initializing i8042

Quoted 8 lines
Quoted 5 lines

If I hit the keyboard early in the boot, the system will just reboot.

If I wait a bit, then it will boot to a prompt, but no keyboard input is accepted.

Does booting with "usb-handoff" boot option help any?

Not sure, but acpi=no works.

Thanks,
Ben

Signature · 2 lines
Ben Greear <[email protected]>
Candela Technologies Inc  http://www.candelatech.com
#3 lore raw
In reply to Ben Greear
Quoted 11 lines · Ben Greear

I have a system with a super-micro P8SCI motherboard.

The default FC2 kernel (2.6.10-1.771_FC2smp) works fine, but when I try to boot a 2.6.13.2 kernel, I see this error:

i8042.c: Can't read CTR while initializing i8042

If I hit the keyboard early in the boot, the system will just reboot.

If I wait a bit, then it will boot to a prompt, but no keyboard input is accepted.

Fedora Core has a patch (which was rejected upstream) which automatically fixes up problems with some BIOS USB emulation. On the base kernel you need to specify "usb-handoff" on the command line at boot. Another approach is to turn USB keyboard off in the BIOS.

Alan