CRC failure
Three -mm kernels of late, and now v2.6.15-rc5-mm2, give
frequent z-modem crc errors with minicom, lrz, and an external v90 modem to a couple of local bb's. 2.6.15-rc5-git2 and before are okay. --
Quoted 3 lines · Kenneth Parrish
Three -mm kernels of late, and now v2.6.15-rc5-mm2, give
frequent z-modem crc errors with minicom, lrz, and an external v90 modem to a couple of local bb's. 2.6.15-rc5-git2 and before are okay.
Which -mm kernels gave the error, and which do you know ehrre ok. Also can you tell me more about the hardware arrangement you are using - what cpu, what serial driver ?
The -mm tree contains some buffering changes I made and those would be the obvious candidate for suspicion
Quoted 8 lines · Alan Cox
Quoted 3 lines · Kenneth Parrish
Three -mm kernels of late, and now v2.6.15-rc5-mm2, give
frequent z-modem crc errors with minicom, lrz, and an external v90 modem to a couple of local bb's. 2.6.15-rc5-git2 and before are okay.
Quoted 6 lines
Which -mm kernels gave the error, and which do you know ehrre ok. Also can you tell me more about the hardware arrangement you are using - what cpu, what serial driver ?
The -mm tree contains some buffering changes I made and those would be the obvious candidate for suspicion
Please CC: me on all replies to this thread, because I think this is also related to the ppp failures (a packet repeating over and over) that I reported earlier on -mm kernels.
Signature · 1 line
Alexander E. Patrakov
Quoted 3 lines · Kenneth Parrish
Three -mm kernels of late, and now v2.6.15-rc5-mm2, give
frequent z-modem crc errors with minicom, lrz, and an external v90 modem to a couple of local bb's. 2.6.15-rc5-git2 and before are okay.
Does the error rate vary if you run a CPU hog (e.g. cat /dev/urandom >/dev/null) or glxgears in parallel to minicom?
Signature · 1 line
Alexander E. Patrakov
-=> In article 14 Dec 05 18:06:44, patrakov@ wrote to Kenneth Parrish <=-
pa> Does the error rate vary if you run a CPU hog (e.g. cat pa> /dev/urandom
Quoted 1 line
/dev/null) or glxgears in parallel to minicom?
The system has been idle. Increasing the load should worsen the errors, but they're pretty frequent so i might not see.
The computer's ISA-PNP Crystal Sound CS4235 soldered onto the motherboard sounds best with the main pci latency timer set to 0, but this gives serial overruns, so i've made a small 'mon', or modem on, script to reset this:
# mon /etc/rc.d/rc.acpidyn-modem restart /sbin/setpci -v -s 00:00.0 LATENCY_TIMER=20
and another for when the modem's not needed, 'moff'
# moff /etc/rc.d/rc.acpidyn restart /sbin/setpci -v -s 00:00.0 LATENCY_TIMER=0 /sbin/rmmod 8250 serial_core
and this seems to work well. The sound worsens as you increase the 00:00.0 LATENCY_TIMER.
... Arno's firewall: http://rocky.eld.leidenuniv.nl/
--- MultiMail/Linux v0.46