Skip to contentSkip to conversation

ondemand and p3-m

DISCUSSION Niko Ehrenfeuchter 4 participants 5 messages Jan 20, 2006 – Jan 21, 2006

lore
Share & tools
lore
#0 lore raw

Hi all,

I'm currently trying to get the ondemand-governor working with my PIII-M (1133 MHz). The system is a ThinkPad X24 using the Intel 830 chipset, kernel 2.6.15.1 with the corresponding (stable) acpi-patch.

While using the speedstep-ich module works for userspace stuff, echoing "ondemand" into scaling_governor simply yields an invalid argument error. Latency issue, I assume...? Turning on cpufreq's debug mode doesn't tell anything why it won't use the ondemand gov.

Looked through the archive for that issue, but I haven't been _that_ successful, since it lacks some kind of search function... The only thing I've discovered was a thread in october where Eric Piel posted a patch for the first-generation 440BX speedstep. Is this patch included in the current kernel? Should it work for me too?

Any hints?

Niko

#1 lore raw

20.01.2006 23:16, Niko Ehrenfeuchter wrote/a écrit:

Quoted 11 lines

Hi all,

I'm currently trying to get the ondemand-governor working with my PIII-M (1133 MHz). The system is a ThinkPad X24 using the Intel 830 chipset, kernel 2.6.15.1 with the corresponding (stable) acpi-patch.

While using the speedstep-ich module works for userspace stuff, echoing "ondemand" into scaling_governor simply yields an invalid argument error. Latency issue, I assume...? Turning on cpufreq's debug mode doesn't tell anything why it won't use the ondemand gov.

Quoted 7 lines

Looked through the archive for that issue, but I haven't been _that_ successful, since it lacks some kind of search function... The only thing I've discovered was a thread in october where Eric Piel posted a patch for the first-generation 440BX speedstep. Is this patch included in the current kernel? Should it work for me too?

Any hints?

Hi!

Which driver do you use? Is it speedstep-ich? If so, it's now available in vanilla kernel since... 2.6.16-rc1, slightly too bleding edge for common mortals but it means it's coming soon!

If you don't want to wait, you can just apply the 2 patches of Mattia Dongili on a 2.6.15. ("Move PMBASE..." and "Measure transition latency at driver initialization" _updated_)

c u
Eric

#2 lore raw

Hi,

Quoted 18 lines · Eric Piel
Quoted 17 lines · Niko Ehrenfeuchter wrote/

Hi all,

I'm currently trying to get the ondemand-governor working with my PIII-M (1133 MHz). The system is a ThinkPad X24 using the Intel 830 chipset, kernel 2.6.15.1 with the corresponding (stable) acpi-patch.

While using the speedstep-ich module works for userspace stuff, echoing "ondemand" into scaling_governor simply yields an invalid argument error. Latency issue, I assume...? Turning on cpufreq's debug mode doesn't tell anything why it won't use the ondemand gov.

Looked through the archive for that issue, but I haven't been _that_ successful, since it lacks some kind of search function... The only thing I've discovered was a thread in october where Eric Piel posted a patch for the first-generation 440BX speedstep. Is this patch included in the current kernel? Should it work for me too?

Quoted 4 lines
Quoted 1 line

Any hints?

Hi!

Which driver do you use? Is it speedstep-ich?

yep, mentioned it in the second section :-)

Quoted 3 lines

If so, it's now available
in vanilla kernel since... 2.6.16-rc1, slightly too bleding edge for common mortals but it means it's coming soon!

ah, that sounds nice. Missed it only very tight...

Quoted 3 lines

If you don't want to wait, you can just apply the 2 patches of Mattia Dongili on a 2.6.15. ("Move PMBASE..." and "Measure transition latency at driver initialization" _updated_)

where can I fetch them? The ml-archives?

Thanks for the fast reply,
Niko

#3 lore raw

Hello!

Quoted 3 lines · Niko Ehrenfeuchter

Hi,

On Sat, 2006-01-21 at 00:15 +0100, Eric Piel wrote:

[...]

Quoted 11 lines
Quoted 3 lines

If so, it's now available
in vanilla kernel since... 2.6.16-rc1, slightly too bleding edge for common mortals but it means it's coming soon!

ah, that sounds nice. Missed it only very tight...

Quoted 3 lines

If you don't want to wait, you can just apply the 2 patches of Mattia Dongili on a 2.6.15. ("Move PMBASE..." and "Measure transition latency at driver initialization" _updated_)

where can I fetch them? The ml-archives?

Move PMBASE away is here
http://lists.linux.org.uk/mailman/private/cpufreq/2005-November/005466.html

and transition latency measurement here
http://lists.linux.org.uk/mailman/private/cpufreq/2005-December/005490.html

or take them from gitweb:
1: <url>http://www.kernel.org/git/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff_plain;h=1a10760c91c394dfe4adfefeeaf85cd8098c4894;hp=fc457fa7c0cdbfe96812ba377e508880d600298f</url> 2: <url>http://www.kernel.org/git/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff_plain;h=9a7d82a89a8bf55b112f2a5c3b3f405eb95a4303;hp=1a10760c91c394dfe4adfefeeaf85cd8098c4894</url>

hth

Signature · 2 lines
mattia
:wq!
#4 lore raw
In reply to Niko Ehrenfeuchter
Quoted 3 lines · Niko Ehrenfeuchter

While using the speedstep-ich module works for userspace stuff, echoing "ondemand" into scaling_governor simply yields an invalid argument error.

Mh, I guess you compiled the governor as a module, but the cpufreq_ondemand.ko module isn't loaded?

Scaling with PIII-M and an i8xx chipset should work just fine, especially if it does using the "userspace" governor.

Greetings,

Gunter

Signature · 4 lines
3) I don't sign parts of the body, even if they're still attached.      
  -- From Terry's Rules of Book Signing           (Terry Pratchett, 
alt.fan.pratchett)
*** PGP-Verschlüsselung bei eMails erwünscht :-) *** PGP: 0x1128F25F ***