ondemand and p3-m
Hi all,
I'm currently trying to get the ondemand-governor working with my PIII-M (1133 MHz). The system is a ThinkPad X24 using the Intel 830 chipset, kernel 2.6.15.1 with the corresponding (stable) acpi-patch.
While using the speedstep-ich module works for userspace stuff, echoing "ondemand" into scaling_governor simply yields an invalid argument error. Latency issue, I assume...? Turning on cpufreq's debug mode doesn't tell anything why it won't use the ondemand gov.
Looked through the archive for that issue, but I haven't been _that_ successful, since it lacks some kind of search function... The only thing I've discovered was a thread in october where Eric Piel posted a patch for the first-generation 440BX speedstep. Is this patch included in the current kernel? Should it work for me too?
Any hints?
Niko
20.01.2006 23:16, Niko Ehrenfeuchter wrote/a écrit:
Quoted 11 lines
Hi all,
I'm currently trying to get the ondemand-governor working with my PIII-M (1133 MHz). The system is a ThinkPad X24 using the Intel 830 chipset, kernel 2.6.15.1 with the corresponding (stable) acpi-patch.
While using the speedstep-ich module works for userspace stuff, echoing "ondemand" into
scaling_governorsimply yields an invalid argument error. Latency issue, I assume...? Turning on cpufreq's debug mode doesn't tell anything why it won't use the ondemand gov.
Quoted 7 lines
Looked through the archive for that issue, but I haven't been _that_ successful, since it lacks some kind of search function... The only thing I've discovered was a thread in october where Eric Piel posted a patch for the first-generation 440BX speedstep. Is this patch included in the current kernel? Should it work for me too?
Any hints?
Hi!
Which driver do you use? Is it speedstep-ich? If so, it's now available in vanilla kernel since... 2.6.16-rc1, slightly too bleding edge for common mortals but it means it's coming soon!
If you don't want to wait, you can just apply the 2 patches of Mattia Dongili on a 2.6.15. ("Move PMBASE..." and "Measure transition latency at driver initialization" _updated_)
c u
Eric
Hi,
Quoted 18 lines · Eric Piel
Quoted 17 lines · Niko Ehrenfeuchter wrote/
Hi all,
I'm currently trying to get the ondemand-governor working with my PIII-M (1133 MHz). The system is a ThinkPad X24 using the Intel 830 chipset, kernel 2.6.15.1 with the corresponding (stable) acpi-patch.
While using the speedstep-ich module works for userspace stuff, echoing "ondemand" into
scaling_governorsimply yields an invalid argument error. Latency issue, I assume...? Turning on cpufreq's debug mode doesn't tell anything why it won't use the ondemand gov.Looked through the archive for that issue, but I haven't been _that_ successful, since it lacks some kind of search function... The only thing I've discovered was a thread in october where Eric Piel posted a patch for the first-generation 440BX speedstep. Is this patch included in the current kernel? Should it work for me too?
Quoted 4 lines
Quoted 1 line
Any hints?
Hi!
Which driver do you use? Is it speedstep-ich?
yep, mentioned it in the second section :-)
Quoted 3 lines
If so, it's now available
in vanilla kernel since... 2.6.16-rc1, slightly too bleding edge for common mortals but it means it's coming soon!
ah, that sounds nice. Missed it only very tight...
Quoted 3 lines
If you don't want to wait, you can just apply the 2 patches of Mattia Dongili on a 2.6.15. ("Move PMBASE..." and "Measure transition latency at driver initialization" _updated_)
where can I fetch them? The ml-archives?
Thanks for the fast reply,
Niko
Hello!
Quoted 3 lines · Niko Ehrenfeuchter
Hi,
On Sat, 2006-01-21 at 00:15 +0100, Eric Piel wrote:
[...]
Quoted 11 lines
Quoted 3 lines
If so, it's now available
in vanilla kernel since... 2.6.16-rc1, slightly too bleding edge for common mortals but it means it's coming soon!ah, that sounds nice. Missed it only very tight...
Quoted 3 lines
If you don't want to wait, you can just apply the 2 patches of Mattia Dongili on a 2.6.15. ("Move PMBASE..." and "Measure transition latency at driver initialization" _updated_)
where can I fetch them? The ml-archives?
Move PMBASE away is here
http://lists.linux.org.uk/mailman/private/cpufreq/2005-November/005466.html
and transition latency measurement here
http://lists.linux.org.uk/mailman/private/cpufreq/2005-December/005490.html
or take them from gitweb:
1: <url>http://www.kernel.org/git/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff_plain;h=1a10760c91c394dfe4adfefeeaf85cd8098c4894;hp=fc457fa7c0cdbfe96812ba377e508880d600298f</url> 2: <url>http://www.kernel.org/git/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff_plain;h=9a7d82a89a8bf55b112f2a5c3b3f405eb95a4303;hp=1a10760c91c394dfe4adfefeeaf85cd8098c4894</url>
hth
Signature · 2 lines
mattia :wq!
Quoted 3 lines · Niko Ehrenfeuchter
While using the speedstep-ich module works for userspace stuff, echoing "ondemand" into
scaling_governorsimply yields an invalid argument error.
Mh, I guess you compiled the governor as a module, but the cpufreq_ondemand.ko module isn't loaded?
Scaling with PIII-M and an i8xx chipset should work just fine, especially if it does using the "userspace" governor.
Greetings,
Gunter
Signature · 4 lines
3) I don't sign parts of the body, even if they're still attached. -- From Terry's Rules of Book Signing (Terry Pratchett, alt.fan.pratchett) *** PGP-Verschlüsselung bei eMails erwünscht :-) *** PGP: 0x1128F25F ***