Skip to contentSkip to conversation

APIC error on CPUx

DISCUSSION Vladimir Dvorak 5 participants 9 messages May 22, 2006

lore
Share & tools
lore
#0 lore raw

Hello to all,

after mailserver installation im getting these messages from kernel:

APIC error on CPU1: 40(40)
APIC error on CPU1: 40(40)
APIC error on CPU0: 00(40)
APIC error on CPU0: 40(40)
APIC error on CPU0: 40(40)
APIC error on CPU1: 40(40)
APIC error on CPU1: 40(40)
APIC error on CPU1: 40(40)

Approximatelly from 2 to 5 messages per 24 hours.

Linux requisities:
Debian 3.1
Linux mailserver 2.6.8-3-686-smp #1 SMP Thu Feb 9 07:05:39 UTC 2006 i686 GNU/Linux

Hardware:
Intel SR1200

Solution from google ?
"upgrade BIOS firmware" - but Im sure the BIOS is the latest.

How serious is this problem ? Does some patch exist to workaround APIC errors ?
What is the sense of putting "noapic and nolapic" parameters into the cmdline ? ( Can these parameters cause performance decreasing ? )

Thank you !

Vladimir Dvorak

#1 lore raw
Quoted 4 lines · Vladimir Dvorak

Linux requisities:
Debian 3.1
Linux mailserver 2.6.8-3-686-smp #1 SMP Thu Feb 9 07:05:39 UTC 2006 i686

That's an ancient kernel.

Quoted 4 lines

GNU/Linux

Hardware:
Intel SR1200

If it's an <=P3 class machine: most likely you have noise on the APIC bus.

-Andi

#2 lore raw
Quoted 12 lines · Andi Kleen
Quoted 5 lines · Vladimir Dvorak

Linux requisities:
Debian 3.1
Linux mailserver 2.6.8-3-686-smp #1 SMP Thu Feb 9 07:05:39 UTC 2006 i686

That's an ancient kernel.

Yes, I agree.

... but the latest in Debian/Sarge. :-)

Do you, Andi, thing that upgrade to latest vanilla one ( from kernel.org ) should solve this problem ?

Quoted 4 lines
Quoted 4 lines

GNU/Linux

Quoted 11 lines
Quoted 4 lines

Hardware:
Intel SR1200

If it's an <=P3 class machine: most likely you have noise on the APIC bus.

-Andi

Yes, you are right :

cat /proc/cpuinfo
...
model name : Intel(R) Pentium(R) III CPU family 1133MHz
...

"Noise on APIC bus" means - " a lot of interrupts from devices" ?

Thank you Andi!

Vladimir

#3 lore raw
Quoted 14 lines · Vladimir Dvorak
Quoted 12 lines · Andi Kleen
Quoted 5 lines · Vladimir Dvorak

Linux requisities:
Debian 3.1
Linux mailserver 2.6.8-3-686-smp #1 SMP Thu Feb 9 07:05:39 UTC 2006 i686

That's an ancient kernel.

Quoted 6 lines

Yes, I agree.

... but the latest in Debian/Sarge. :-)

Do you, Andi, thing that upgrade to latest vanilla one ( from kernel.org ) should solve this problem ?

Probably not.

Quoted 18 lines
Quoted 5 lines
Quoted 5 lines

GNU/Linux

Quoted 11 lines
Quoted 4 lines

Hardware:
Intel SR1200

If it's an <=P3 class machine: most likely you have noise on the APIC bus.

-Andi

Yes, you are right :

Quoted 7 lines

cat /proc/cpuinfo
...
model name : Intel(R) Pentium(R) III CPU family 1133MHz
...

"Noise on APIC bus" means - " a lot of interrupts from devices" ?

Usually a crappy/broken/misdesigned motherboard.

-Andi

#4 lore raw
Quoted 65 lines · Andi Kleen
Quoted 21 lines · Vladimir Dvorak
Quoted 5 lines · Andi Kleen

Vladimir Dvorak <[email protected]> writes:

Quoted 12 lines
Quoted 7 lines

Linux requisities:
Debian 3.1
Linux mailserver 2.6.8-3-686-smp #1 SMP Thu Feb 9 07:05:39 UTC 2006 i686

That's an ancient kernel.

Quoted 8 lines

Yes, I agree.

... but the latest in Debian/Sarge. :-)

Do you, Andi, thing that upgrade to latest vanilla one ( from kernel.org ) should solve this problem ?

Probably not.

Quoted 28 lines
Quoted 12 lines
Quoted 4 lines
Quoted 8 lines

GNU/Linux

Hardware:
Intel SR1200

Quoted 8 lines

If it's an <=P3 class machine: most likely you have noise on the APIC bus.

-Andi

Yes, you are right :

cat /proc/cpuinfo
...
model name : Intel(R) Pentium(R) III CPU family 1133MHz
...

Quoted 11 lines
Quoted 3 lines

"Noise on APIC bus" means - " a lot of interrupts from devices" ?

Usually a crappy/broken/misdesigned motherboard.

-Andi

And, probably, the latest question related to this topic:

Can "noapic" or "nolapic" solve this ? Does it mean ( with these parameters ) that devices will start to use 8259 interrupt controller instead APIC ?

Is harmfull put "noapic" on "nolapic" to cmdline ?

Thank you.

Vladimir

#5 lore raw

Hi,

I also have this [a similar] message; it is produced repeatedly between 2.5 and 5 seconds whenever the ISDN card is dialled in:

May 22 14:28:18 shanghai kernel: APIC error on CPU0: 02(02)

Linux shanghai 2.6.17-rc4 #1 Sat May 20 00:06:16 CEST 2006 i686 athlon i386 GNU/Linux

Quoted 15 lines
Quoted 15 lines
Quoted 7 lines
Quoted 3 lines
Quoted 2 lines

Debian 3.1
Linux mailserver 2.6.8-3-686-smp #1 SMP Thu Feb 9 07:05:39 UTC 2006 i686

That's an ancient kernel.

Yes, I agree.
... but the latest in Debian/Sarge. :-)
Do you, Andi, thing that upgrade to latest vanilla one ( from kernel.org ) should solve this problem ?

Probably not.

Quoted 7 lines
Quoted 7 lines
Quoted 5 lines

GNU/Linux
Hardware:
Intel SR1200

If it's an <=P3 class machine: most likely you have noise on the APIC bus.

Quoted 7 lines
Quoted 7 lines
Quoted 7 lines

Yes, you are right :
cat /proc/cpuinfo
...
model name : Intel(R) Pentium(R) III CPU family 1133MHz
...

"Noise on APIC bus" means - " a lot of interrupts from devices" ?

Yep.

14:29 shanghai:~ > (while :; do cat /proc/interrupts |grep -i hisax; sleep 1; done)

193:    1111340   IO-APIC-level  SiS SI7012, HiSax
193:    1113106   IO-APIC-level  SiS SI7012, HiSax
193:    1114857   IO-APIC-level  SiS SI7012, HiSax
193:    1116599   IO-APIC-level  SiS SI7012, HiSax
193:    1118328   IO-APIC-level  SiS SI7012, HiSax
193:    1120093   IO-APIC-level  SiS SI7012, HiSax
193:    1121858   IO-APIC-level  SiS SI7012, HiSax
193:    1123608   IO-APIC-level  SiS SI7012, HiSax

(Hisax: CONFIG_HISAX_NETJET=y)

The problem goes away with noapic or acpi=off, but of course that also means you don't have IRQs > 15.

Quoted 1 line
Quoted 1 line

Usually a crappy/broken/misdesigned motherboard.

Elitegroup L7S7A2 here.

Quoted 7 lines

And, probably, the latest question related to this topic:

Can "noapic" or "nolapic" solve this ? Does it mean ( with these parameters ) that devices will start to use 8259 interrupt controller instead APIC ?

Is harmfull put "noapic" on "nolapic" to cmdline ?

Jan Engelhardt

#6 lore raw
In reply to Vladimir Dvorak
Quoted 4 lines

Can "noapic" or "nolapic" solve this ? Does it mean ( with these parameters ) that devices will start to use 8259 interrupt controller instead APIC ?

nolapic won't work on SMP (or rather forced UP mode)

You'll not see the messages anymore, but might get silent corruption. Or it might work around it because it will make everything a bit slower.

Quoted 2 lines

Is harmfull put "noapic" on "nolapic" to cmdline ?

If all devices can still be accessed noapic is just slower.

-Andi

#7 lore raw
Quoted 6 lines · Andi Kleen
Quoted 3 lines

Can "noapic" or "nolapic" solve this ? Does it mean ( with these parameters ) that devices will start to use 8259 interrupt controller instead APIC ?

nolapic won't work on SMP (or rather forced UP mode)

Quoted 7 lines

You'll not see the messages anymore, but might get silent corruption. Or it might work around it because it will make everything a bit slower.

Quoted 2 lines

Is harmfull put "noapic" on "nolapic" to cmdline ?

If all devices can still be accessed noapic is just slower.

So, is there a software solution to this problem ? I have the same one on an old Dell server.

Thanks,
Xav

#8 lore raw
In reply to Vladimir Dvorak
Quoted 16 lines · Vladimir Dvorak
Quoted 16 lines
Quoted 16 lines
Quoted 9 lines
Quoted 5 lines

GNU/Linux

Hardware:
Intel SR1200

If it's an <=P3 class machine: most likely you have noise on the APIC bus.

-Andi

Yes, you are right :

cat /proc/cpuinfo
...
model name : Intel(R) Pentium(R) III CPU family 1133MHz
...

Quoted 5 lines
Quoted 5 lines
Quoted 1 line

"Noise on APIC bus" means - " a lot of interrupts from devices" ?

Usually a crappy/broken/misdesigned motherboard.

-Andi

I say a similar error message upon boot:

        APIC error on CPU0: 00(40)
        APIC error on CPU0: 40(40)

I run i386 kernel (Debian/etch) on Turion64 MT-30; it is an Averatec 2155 notebook (aka MSI 1013).