APIC error on CPUx
Hello to all,
after mailserver installation im getting these messages from kernel:
APIC error on CPU1: 40(40)
APIC error on CPU1: 40(40)
APIC error on CPU0: 00(40)
APIC error on CPU0: 40(40)
APIC error on CPU0: 40(40)
APIC error on CPU1: 40(40)
APIC error on CPU1: 40(40)
APIC error on CPU1: 40(40)
Approximatelly from 2 to 5 messages per 24 hours.
Linux requisities:
Debian 3.1
Linux mailserver 2.6.8-3-686-smp #1 SMP Thu Feb 9 07:05:39 UTC 2006 i686 GNU/Linux
Hardware:
Intel SR1200
Solution from google ?
"upgrade BIOS firmware" - but Im sure the BIOS is the latest.
How serious is this problem ? Does some patch exist to workaround APIC errors ?
What is the sense of putting "noapic and nolapic" parameters into the cmdline ? ( Can these parameters cause performance decreasing ? )
Thank you !
Vladimir Dvorak
Quoted 4 lines · Vladimir Dvorak
Linux requisities:
Debian 3.1
Linux mailserver 2.6.8-3-686-smp #1 SMP Thu Feb 9 07:05:39 UTC 2006 i686
That's an ancient kernel.
Quoted 4 lines
GNU/Linux
Hardware:
Intel SR1200
If it's an <=P3 class machine: most likely you have noise on the APIC bus.
-Andi
Quoted 12 lines · Andi Kleen
Quoted 5 lines · Vladimir Dvorak
Linux requisities:
Debian 3.1
Linux mailserver 2.6.8-3-686-smp #1 SMP Thu Feb 9 07:05:39 UTC 2006 i686That's an ancient kernel.
Yes, I agree.
... but the latest in Debian/Sarge. :-)
Do you, Andi, thing that upgrade to latest vanilla one ( from kernel.org ) should solve this problem ?
Quoted 4 lines
Quoted 4 lines
GNU/Linux
Quoted 11 lines
Quoted 4 lines
Hardware:
Intel SR1200If it's an <=P3 class machine: most likely you have noise on the APIC bus.
-Andi
Yes, you are right :
cat /proc/cpuinfo
...
model name : Intel(R) Pentium(R) III CPU family 1133MHz
...
"Noise on APIC bus" means - " a lot of interrupts from devices" ?
Thank you Andi!
Vladimir
Quoted 14 lines · Vladimir Dvorak
Quoted 12 lines · Andi Kleen
Quoted 5 lines · Vladimir Dvorak
Linux requisities:
Debian 3.1
Linux mailserver 2.6.8-3-686-smp #1 SMP Thu Feb 9 07:05:39 UTC 2006 i686That's an ancient kernel.
Quoted 6 lines
Yes, I agree.
... but the latest in Debian/Sarge. :-)
Do you, Andi, thing that upgrade to latest vanilla one ( from kernel.org ) should solve this problem ?
Probably not.
Quoted 18 lines
Quoted 5 lines
Quoted 5 lines
GNU/Linux
Quoted 11 lines
Quoted 4 lines
Hardware:
Intel SR1200If it's an <=P3 class machine: most likely you have noise on the APIC bus.
-Andi
Yes, you are right :
Quoted 7 lines
cat
/proc/cpuinfo
...
model name : Intel(R) Pentium(R) III CPU family 1133MHz
..."Noise on APIC bus" means - " a lot of interrupts from devices" ?
Usually a crappy/broken/misdesigned motherboard.
-Andi
Quoted 65 lines · Andi Kleen
Quoted 21 lines · Vladimir Dvorak
Quoted 5 lines · Andi Kleen
Vladimir Dvorak <[email protected]> writes:
Quoted 12 lines
Quoted 7 lines
Linux requisities:
Debian 3.1
Linux mailserver 2.6.8-3-686-smp #1 SMP Thu Feb 9 07:05:39 UTC 2006 i686That's an ancient kernel.
Quoted 8 lines
Yes, I agree.
... but the latest in Debian/Sarge. :-)
Do you, Andi, thing that upgrade to latest vanilla one ( from kernel.org ) should solve this problem ?
Probably not.
Quoted 28 lines
Quoted 12 lines
Quoted 4 lines
Quoted 8 lines
GNU/Linux
Hardware:
Intel SR1200Quoted 8 lines
If it's an <=P3 class machine: most likely you have noise on the APIC bus.
-Andi
Yes, you are right :
cat
/proc/cpuinfo
...
model name : Intel(R) Pentium(R) III CPU family 1133MHz
...
Quoted 11 lines
Quoted 3 lines
"Noise on APIC bus" means - " a lot of interrupts from devices" ?
Usually a crappy/broken/misdesigned motherboard.
-Andi
And, probably, the latest question related to this topic:
Can "noapic" or "nolapic" solve this ? Does it mean ( with these parameters ) that devices will start to use 8259 interrupt controller instead APIC ?
Is harmfull put "noapic" on "nolapic" to cmdline ?
Thank you.
Vladimir
Hi,
I also have this [a similar] message; it is produced repeatedly between 2.5 and 5 seconds whenever the ISDN card is dialled in:
May 22 14:28:18 shanghai kernel: APIC error on CPU0: 02(02)
Linux shanghai 2.6.17-rc4 #1 Sat May 20 00:06:16 CEST 2006 i686 athlon i386 GNU/Linux
Quoted 15 lines
Quoted 15 lines
Quoted 7 lines
Quoted 3 lines
Quoted 2 lines
Debian 3.1
Linux mailserver 2.6.8-3-686-smp #1 SMP Thu Feb 9 07:05:39 UTC 2006 i686That's an ancient kernel.
Yes, I agree.
... but the latest in Debian/Sarge. :-)
Do you, Andi, thing that upgrade to latest vanilla one ( from kernel.org ) should solve this problem ?Probably not.
Quoted 7 lines
Quoted 7 lines
Quoted 5 lines
GNU/Linux
Hardware:
Intel SR1200If it's an <=P3 class machine: most likely you have noise on the APIC bus.
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
Yes, you are right :
cat/proc/cpuinfo
...
model name : Intel(R) Pentium(R) III CPU family 1133MHz
..."Noise on APIC bus" means - " a lot of interrupts from devices" ?
Yep.
14:29 shanghai:~ > (while :; do cat /proc/interrupts |grep -i hisax; sleep 1; done)
193: 1111340 IO-APIC-level SiS SI7012, HiSax 193: 1113106 IO-APIC-level SiS SI7012, HiSax 193: 1114857 IO-APIC-level SiS SI7012, HiSax 193: 1116599 IO-APIC-level SiS SI7012, HiSax 193: 1118328 IO-APIC-level SiS SI7012, HiSax 193: 1120093 IO-APIC-level SiS SI7012, HiSax 193: 1121858 IO-APIC-level SiS SI7012, HiSax 193: 1123608 IO-APIC-level SiS SI7012, HiSax
(Hisax: CONFIG_HISAX_NETJET=y)
The problem goes away with noapic or acpi=off, but of course that also means you don't have IRQs > 15.
Quoted 1 line
Quoted 1 line
Usually a crappy/broken/misdesigned motherboard.
Elitegroup L7S7A2 here.
Quoted 7 lines
And, probably, the latest question related to this topic:
Can "noapic" or "nolapic" solve this ? Does it mean ( with these parameters ) that devices will start to use 8259 interrupt controller instead APIC ?
Is harmfull put "noapic" on "nolapic" to cmdline ?
Jan Engelhardt
Quoted 4 lines
Can "noapic" or "nolapic" solve this ? Does it mean ( with these parameters ) that devices will start to use 8259 interrupt controller instead APIC ?
nolapic won't work on SMP (or rather forced UP mode)
You'll not see the messages anymore, but might get silent corruption. Or it might work around it because it will make everything a bit slower.
Quoted 2 lines
Is harmfull put "noapic" on "nolapic" to cmdline ?
If all devices can still be accessed noapic is just slower.
-Andi
Quoted 6 lines · Andi Kleen
Quoted 3 lines
Can "noapic" or "nolapic" solve this ? Does it mean ( with these parameters ) that devices will start to use 8259 interrupt controller instead APIC ?
nolapic won't work on SMP (or rather forced UP mode)
Quoted 7 lines
You'll not see the messages anymore, but might get silent corruption. Or it might work around it because it will make everything a bit slower.
Quoted 2 lines
Is harmfull put "noapic" on "nolapic" to cmdline ?
If all devices can still be accessed noapic is just slower.
So, is there a software solution to this problem ? I have the same one on an old Dell server.
Thanks,
Xav
Quoted 16 lines · Vladimir Dvorak
Quoted 16 lines
Quoted 16 lines
Quoted 9 lines
Quoted 5 lines
GNU/Linux
Hardware:
Intel SR1200If it's an <=P3 class machine: most likely you have noise on the APIC bus.
-Andi
Yes, you are right :
cat
/proc/cpuinfo
...
model name : Intel(R) Pentium(R) III CPU family 1133MHz
...
Quoted 5 lines
Quoted 5 lines
Quoted 1 line
"Noise on APIC bus" means - " a lot of interrupts from devices" ?
Usually a crappy/broken/misdesigned motherboard.
-Andi
I say a similar error message upon boot:
APIC error on CPU0: 00(40)
APIC error on CPU0: 40(40)I run i386 kernel (Debian/etch) on Turion64 MT-30; it is an Averatec 2155 notebook (aka MSI 1013).