i2c: New bus driver for the
Subsystems (3)
PATCH 20/44 i2c: New bus driver for the
From: Peter Korsgaard <jacmet at sunsite.dk>
The following patch adds support for the OpenCores I2C controller IP core (See http://www.opencores.org/projects.cgi/web/i2c/overview).
Signed-off-by Peter Korsgaard <jacmet at sunsite.dk>
Signed-off-by Andrew Morton <akpm at osdl.org>
Signed-off-by Jean Delvare <khali at linux-fr.org>
Signed-off-by Greg Kroah-Hartman <gregkh at suse.de>
--- Documentation/i2c/busses/i2c-ocores | 51 +++++ drivers/i2c/busses/Kconfig | 11 + drivers/i2c/busses/Makefile | 1 drivers/i2c/busses/i2c-ocores.c | 343 +++++++++++++++++++++++++++++++++++ include/linux/i2c-ocores.h | 19 ++ 5 files changed, 425 insertions(+), 0 deletions(-)
Documentation/i2c/busses/i2c-ocores new file +51 -0
@@ -0,0 +1,51 @@ +Kernel driver i2c-ocores + +Supported adapters: + * OpenCores.org I2C controller by Richard Herveille (see datasheet link) + Datasheet: http://www.opencores.org/projects.cgi/web/i2c/overview + +Author: Peter Korsgaard <jacmet at sunsite.dk> + +Description +----------- + +i2c-ocores is an i2c bus driver for the OpenCores.org I2C controller +IP core by Richard Herveille. + +Usage +----- + +i2c-ocores uses the platform bus, so you need to provide a struct +platform_device with the base address and interrupt number. The +dev.platform_data of the device should also point to a struct +ocores_i2c_platform_data (see linux/i2c-ocores.h) describing the +distance between registers and the input clock speed. + +E.G. something like: + +static struct resource ocores_resources[] = { + [0] = { + .start = MYI2C_BASEADDR, + .end = MYI2C_BASEADDR + 8, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = MYI2C_IRQ, + .end = MYI2C_IRQ, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct ocores_i2c_platform_data myi2c_data = { + .regstep = 2, /* two bytes between registers */ + .clock_khz = 50000, /* input clock of 50MHz */ +}; + +static struct platform_device myi2c = { + .name = "ocores-i2c", + .dev = { + .platform_data = &myi2c_data, + }, + .num_resources = ARRAY_SIZE(ocores_resources), + .resource = ocores_resources, +};
drivers/i2c/busses/Kconfig +11 -0
@@ -276,6 +276,17 @@ config I2C_NFORCE2 This driver can also be built as a module. If so, the module will be called i2c-nforce2. +config I2C_OCORES + tristate "OpenCores I2C Controller" + depends on I2C && EXPERIMENTAL + help + If you say yes to this option, support will be included for the + OpenCores I2C controller. For details see + http://www.opencores.org/projects.cgi/web/i2c/overview + + This driver can also be built as a module. If so, the module + will be called i2c-ocores. + config I2C_PARPORT tristate "Parallel port adapter" depends on I2C && PARPORT
drivers/i2c/busses/Makefile +1 -0
@@ -23,6 +23,7 @@ obj-$(CONFIG_I2C_POWERMAC) += i2c-powerm obj-$(CONFIG_I2C_MPC) += i2c-mpc.o obj-$(CONFIG_I2C_MV64XXX) += i2c-mv64xxx.o obj-$(CONFIG_I2C_NFORCE2) += i2c-nforce2.o +obj-$(CONFIG_I2C_OCORES) += i2c-ocores.o obj-$(CONFIG_I2C_PARPORT) += i2c-parport.o obj-$(CONFIG_I2C_PARPORT_LIGHT) += i2c-parport-light.o obj-$(CONFIG_I2C_PCA_ISA) += i2c-pca-isa.o
drivers/i2c/busses/i2c-ocores.c new file +342 -0
342 lines not on this page · raw message
include/linux/i2c-ocores.h new file +19 -0
@@ -0,0 +1,19 @@ +/* +* i2c-ocores.h - definitions for the i2c-ocores interface +* +* Peter Korsgaard <jacmet at sunsite.dk> +* +* This file is licensed under the terms of the GNU General Public License +* version 2. This program is licensed "as is" without any warranty of any +* kind, whether express or implied. +*/ + +#ifndef _LINUX_I2C_OCORES_H +#define _LINUX_I2C_OCORES_H + +struct ocores_i2c_platform_data { +u32 regstep;/* distance between registers */ +u32 clock_khz;/* input clock in kHz */ +}; + +#endif /* _LINUX_I2C_OCORES_H */
Signature · 1 line
1.4.0