Skip to contentSkip to conversation

i2c: New bus driver for the

PATCH New Greg KH 1 participant 1 message Jun 22, 2006

Subsystems (3)
lore
Share & tools
lore

Greg KH

author
#0 lore raw

PATCH 20/44 i2c: New bus driver for the

From: Peter Korsgaard <jacmet at sunsite.dk>

The following patch adds support for the OpenCores I2C controller IP core (See http://www.opencores.org/projects.cgi/web/i2c/overview).

Signed-off-by Peter Korsgaard <jacmet at sunsite.dk>
Signed-off-by Andrew Morton <akpm at osdl.org>
Signed-off-by Jean Delvare <khali at linux-fr.org>
Signed-off-by Greg Kroah-Hartman <gregkh at suse.de>
---
 Documentation/i2c/busses/i2c-ocores |   51 +++++
 drivers/i2c/busses/Kconfig          |   11 +
 drivers/i2c/busses/Makefile         |    1 
 drivers/i2c/busses/i2c-ocores.c     |  343 +++++++++++++++++++++++++++++++++++
 include/linux/i2c-ocores.h          |   19 ++
 5 files changed, 425 insertions(+), 0 deletions(-)
Documentation/i2c/busses/i2c-ocores new file +51 -0
new file mode 100644
index 0000000..cfcebb1
@@ -0,0 +1,51 @@
+Kernel driver i2c-ocores
+
+Supported adapters:
+  * OpenCores.org I2C controller by Richard Herveille (see datasheet link)
+    Datasheet: http://www.opencores.org/projects.cgi/web/i2c/overview
+
+Author: Peter Korsgaard <jacmet at sunsite.dk>
+
+Description
+-----------
+
+i2c-ocores is an i2c bus driver for the OpenCores.org I2C controller
+IP core by Richard Herveille.
+
+Usage
+-----
+
+i2c-ocores uses the platform bus, so you need to provide a struct
+platform_device with the base address and interrupt number. The
+dev.platform_data of the device should also point to a struct
+ocores_i2c_platform_data (see linux/i2c-ocores.h) describing the
+distance between registers and the input clock speed.
+
+E.G. something like:
+
+static struct resource ocores_resources[] = {
+	[0] = {
+		.start	= MYI2C_BASEADDR,
+		.end	= MYI2C_BASEADDR + 8,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= MYI2C_IRQ,
+		.end	= MYI2C_IRQ,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct ocores_i2c_platform_data myi2c_data = {
+	.regstep	= 2,		/* two bytes between registers */
+	.clock_khz	= 50000,	/* input clock of 50MHz */
+};
+
+static struct platform_device myi2c = {
+	.name			= "ocores-i2c",
+	.dev = {
+		.platform_data	= &myi2c_data,
+	},
+	.num_resources		= ARRAY_SIZE(ocores_resources),
+	.resource		= ocores_resources,
+};
drivers/i2c/busses/Kconfig +11 -0
index d25a8cb..f7af7e9 100644
@@ -276,6 +276,17 @@ config I2C_NFORCE2
 	  This driver can also be built as a module.  If so, the module
 	  will be called i2c-nforce2.
 
+config I2C_OCORES
+	tristate "OpenCores I2C Controller"
+	depends on I2C && EXPERIMENTAL
+	help
+	  If you say yes to this option, support will be included for the
+	  OpenCores I2C controller. For details see
+	  http://www.opencores.org/projects.cgi/web/i2c/overview
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-ocores.
+
 config I2C_PARPORT
 	tristate "Parallel port adapter"
 	depends on I2C && PARPORT
drivers/i2c/busses/Makefile +1 -0
index b44831d..ac56df5 100644
@@ -23,6 +23,7 @@ obj-$(CONFIG_I2C_POWERMAC)	+= i2c-powerm
 obj-$(CONFIG_I2C_MPC)		+= i2c-mpc.o
 obj-$(CONFIG_I2C_MV64XXX)	+= i2c-mv64xxx.o
 obj-$(CONFIG_I2C_NFORCE2)	+= i2c-nforce2.o
+obj-$(CONFIG_I2C_OCORES)	+= i2c-ocores.o
 obj-$(CONFIG_I2C_PARPORT)	+= i2c-parport.o
 obj-$(CONFIG_I2C_PARPORT_LIGHT)	+= i2c-parport-light.o
 obj-$(CONFIG_I2C_PCA_ISA)	+= i2c-pca-isa.o
drivers/i2c/busses/i2c-ocores.c new file +342 -0

342 lines not on this page · raw message

include/linux/i2c-ocores.h new file +19 -0
new file mode 100644
index 0000000..8ed591b
@@ -0,0 +1,19 @@
+/*
+ * i2c-ocores.h - definitions for the i2c-ocores interface
+ *
+ * Peter Korsgaard <jacmet at sunsite.dk>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#ifndef _LINUX_I2C_OCORES_H
+#define _LINUX_I2C_OCORES_H
+
+struct ocores_i2c_platform_data {
+	u32 regstep;   /* distance between registers */
+	u32 clock_khz; /* input clock in kHz */
+};
+
+#endif /* _LINUX_I2C_OCORES_H */
Signature · 1 line
1.4.0