Skip to contentSkip to conversation

: Use constant for PHY register 0x1e.

PATCH Applied Michael Chan 2 participants 2 messages Feb 13, 2007

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 6/8 : Use constant for PHY register 0x1e.

[TG3]: Use constant for PHY register 0x1e.

drivers/net/tg3.c +6 -4
index 604f308..a1aeba2 100644
@@ -6594,8 +6594,9 @@ static int tg3_reset_hw(struct tg3 *tp,
 		u32 tmp;
 
 		/* Clear CRC stats. */
-		if (!tg3_readphy(tp, 0x1e, &tmp)) {
-			tg3_writephy(tp, 0x1e, tmp | 0x8000);
+		if (!tg3_readphy(tp, MII_TG3_TEST1, &tmp)) {
+			tg3_writephy(tp, MII_TG3_TEST1,
+				     tmp | MII_TG3_TEST1_CRC_EN);
 			tg3_readphy(tp, 0x14, &tmp);
 		}
 	}
@@ -7419,8 +7420,9 @@ static unsigned long calc_crc_errors(str
 		u32 val;
 
 		spin_lock_bh(&tp->lock);
-		if (!tg3_readphy(tp, 0x1e, &val)) {
-			tg3_writephy(tp, 0x1e, val | 0x8000);
+		if (!tg3_readphy(tp, MII_TG3_TEST1, &val)) {
+			tg3_writephy(tp, MII_TG3_TEST1,
+				     val | MII_TG3_TEST1_CRC_EN);
 			tg3_readphy(tp, 0x14, &val);
 		} else
 			val = 0;
drivers/net/tg3.h +1 -0
index 80f59ac..45d477e 100644
@@ -1660,6 +1660,7 @@
 
 #define MII_TG3_TEST1			0x1e
 #define MII_TG3_TEST1_TRIM_EN		0x0010
+#define MII_TG3_TEST1_CRC_EN		0x8000
 
 /* There are two ways to manage the TX descriptors on the tigon3.
  * Either the descriptors are in host DMA'able memory, or they