: Use constant for PHY register 0x1e.
Subsystems (2)
PATCH 6/8 : Use constant for PHY register 0x1e.
[TG3]: Use constant for PHY register 0x1e.
Signed-off-by Michael Chan <[email protected]>
drivers/net/tg3.c +6 -4
@@ -6594,8 +6594,9 @@ static int tg3_reset_hw(struct tg3 *tp,u32 tmp;/* Clear CRC stats. */ -if (!tg3_readphy (tp,0x1e , &tmp)) { -tg3_writephy (tp,0x1e , tmp |0x8000 ); +if (!tg3_readphy (tp,MII_TG3_TEST1 , &tmp)) { +tg3_writephy (tp,MII_TG3_TEST1 , + tmp |MII_TG3_TEST1_CRC_EN );tg3_readphy (tp,0x14 , &tmp); } }
@@ -7419,8 +7420,9 @@ static unsigned long calc_crc_errors(stru32 val;spin_lock_bh (&tp->lock); -if (!tg3_readphy (tp,0x1e , &val)) { -tg3_writephy (tp,0x1e , val |0x8000 ); +if (!tg3_readphy (tp,MII_TG3_TEST1 , &val)) { +tg3_writephy (tp,MII_TG3_TEST1 , + val |MII_TG3_TEST1_CRC_EN );tg3_readphy (tp,0x14 , &val); }else val =0 ;
drivers/net/tg3.h +1 -0
@@ -1660,6 +1660,7 @@#define MII_TG3_TEST1 0x1e#define MII_TG3_TEST1_TRIM_EN 0x0010 +#define MII_TG3_TEST1_CRC_EN 0x8000/* There are two ways to manage the TX descriptors on the tigon3. * Either the descriptors are in host DMA'able memory, or they
From: "Michael Chan" <[email protected]>
Date: Tue, 13 Feb 2007 12:14:43 -0800
Quoted 3 lines
[TG3]: Use constant for PHY register
0x1e.Signed-off-by Michael Chan <[email protected]>
Applied.