ask some questions about u-boot's bootm command
my cpu is 860T, using bootm command boot a linux kernel image, the following message print by smc1:
bootm 300000
## Booting image at 00300000 ...
Image Name: Linux-2.6.20.14 Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 1081591 Bytes = 1 MB
Load Address: 00100000
Entry Point: 00100000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
## Current stack ends at 0x01D5DB10 => set upper limit to 0x00800000 No initrd
## Transferring control to Linux (at address 00100000) ...
then, the program has no response.
i debug it througth BDM, in u-boot function "do_bootm_linux", execute at "kernel = (void (*)(bd_t *, ulong, ulong, ulong, ulong))hdr->ih_ep", the program branch to address "0x00000000", the code is shown as following:
00000000 mr r31,r3 00000004 mr r30,r4 00000008 mr r29,r5 0000000C mr r28,r6 00000010 mr r27,r7 00000014 bl 0x000020C8 00000018 mfmsr r0 0000001C ori r0,r0,0x30 00000020 mtspr SRR1,r0 00000024 lis r0,0xC0002004@h 00000028 ori r0,r0,0xC0002004@l 0000002C mtspr SRR0,r0 00000030 rfi
my questions are:
1. Is the code "kernel = (void (*)(bd_t *, ulong, ulong, ulong, ulong))hdr->ih_ep" branch right?
2. What's the expected code after "kernel = (void (*)(bd_t *, ulong, ulong, ulong, ulong))hdr->ih_ep"?
3. When the kernel run to the "boot/simple/head.s"?
thanks a lot
poorbeyond
2007-07-22
can u send me output of printenv in boot loader..?
Nethra
Quoted 65 lines · poorbeyond
my cpu is 860T, using bootm command boot a linux kernel image, the following message print by smc1:
bootm 300000
## Booting image at 00300000 ...
Image Name: Linux-2.6.20.14 Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 1081591 Bytes = 1 MBLoad Address: 00100000
Entry Point: 00100000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
## Current stack ends at0x01D5DB10=> set upper limit to0x00800000No initrd
## Transferring control to Linux (at address 00100000) ...then, the program has no response.
i debug it througth BDM, in u-boot function "
do_bootm_linux", execute at "kernel = (void (*)(bd_t *, ulong, ulong, ulong, ulong))hdr->ih_ep", the program branch to address "0x00000000", the code is shown as following:00000000 mr r31,r3 00000004 mr r30,r4 00000008 mr r29,r5 0000000C mr r28,r6 00000010 mr r27,r7 00000014 bl 0x000020C8 00000018 mfmsr r0 0000001C ori r0,r0,0x30 00000020 mtspr SRR1,r0 00000024 lis r0,0xC0002004@h 00000028 ori r0,r0,0xC0002004@l 0000002C mtspr SRR0,r0 00000030 rfimy questions are:
1. Is the code "kernel = (void (*)(bd_t *, ulong, ulong, ulong, ulong))hdr->ih_ep" branch right?
2. What's the expected code after "kernel = (void (*)(bd_t *, ulong, ulong, ulong, ulong))hdr->ih_ep"?
3. When the kernel run to the "
boot/simple/head.s"?thanks a lot
poorbeyond
2007-07-22_______________________________________________
Linuxppc-embedded mailing list
[email protected]
https://ozlabs.org/mailman/listinfo/linuxppc-embedded
Signature · 2 lines
View this message in context: http://www.nabble.com/ask-some-questions-about-u-boot%27s-bootm-command-tf4124319.html#a11761280 Sent from the linuxppc-embedded mailing list archive at Nabble.com.