Skip to contentSkip to conversation

Add support for Xilinx SystemACE CompactFlash interface.

PATCH In review Grant Likely 2 participants 2 messages May 7, 2007 – May 8, 2007 Block layer

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 Add support for Xilinx SystemACE CompactFlash interface.

Tested on Xilinx Virtex ppc405, Katmai 440SPe, and Microblaze

---
 drivers/block/Kconfig   |    6 +
 drivers/block/Makefile  |    1 +
 drivers/block/xsysace.c | 1166 +++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 1173 insertions(+), 0 deletions(-)
 create mode 100644 drivers/block/xsysace.c
drivers/block/Kconfig +6 -0
index 17ee97f..2dc3f60 100644
@@ -453,6 +453,12 @@ config ATA_OVER_ETH
 	This driver provides Support for ATA over Ethernet block
 	devices like the Coraid EtherDrive (R) Storage Blade.
 
+config XILINX_SYSACE
+	tristate "Xilinx SystemACE support"
+	depends on 4xx
+	help
+	  Include support for the Xilinx SystemACE CompactFlash interface
+
 endmenu
 
 endif
drivers/block/Makefile +1 -0
index dd88e33..31ea323 100644
@@ -28,4 +28,5 @@ obj-$(CONFIG_BLK_DEV_CRYPTOLOOP) += cryptoloop.o
 obj-$(CONFIG_VIODASD)		+= viodasd.o
 obj-$(CONFIG_BLK_DEV_SX8)	+= sx8.o
 obj-$(CONFIG_BLK_DEV_UB)	+= ub.o
+obj-$(CONFIG_XILINX_SYSACE)	+= xsysace.o
 
drivers/block/xsysace.c new file +1166 -0

1,166 lines not on this page · raw message

Signature · 1 line
1.5.1