Add support for Xilinx SystemACE CompactFlash interface.
PATCH 1/1 Add support for Xilinx SystemACE CompactFlash interface.
Tested on Xilinx Virtex ppc405, Katmai 440SPe, and Microblaze
Signed-off-by Grant Likely <[email protected]>
--- drivers/block/Kconfig | 6 + drivers/block/Makefile | 1 + drivers/block/xsysace.c | 1166 +++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 1173 insertions(+), 0 deletions(-) create mode 100644 drivers/block/xsysace.c
drivers/block/Kconfig +6 -0
@@ -453,6 +453,12 @@ config ATA_OVER_ETH This driver provides Support for ATA over Ethernet block devices like the Coraid EtherDrive (R) Storage Blade. +config XILINX_SYSACE + tristate "Xilinx SystemACE support" + depends on 4xx + help + Include support for the Xilinx SystemACE CompactFlash interface + endmenu endif
drivers/block/Makefile +1 -0
@@ -28,4 +28,5 @@ obj-$(CONFIG_BLK_DEV_CRYPTOLOOP) += cryptoloop.o obj-$(CONFIG_VIODASD) += viodasd.o obj-$(CONFIG_BLK_DEV_SX8) += sx8.o obj-$(CONFIG_BLK_DEV_UB) += ub.o +obj-$(CONFIG_XILINX_SYSACE) += xsysace.o
drivers/block/xsysace.c new file +1166 -0
1,166 lines not on this page · raw message
Signature · 1 line
1.5.1
Quoted 3 lines · Grant Likely
Tested on Xilinx Virtex ppc405, Katmai 440SPe, and Microblaze
Signed-off-by Grant Likely <[email protected]>
Acked-by Stefan Roese <[email protected]>
Best regards,
Stefan