roland synth sh-201
hi all, with this change in usbquirks.h , i can use my synth roland sh-201
{
/* Roland SH-201 */
USB_DEVICE(0x0582, 0x00ad),
.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
.vendor_name = "Roland",
.product_name = "SH-201",
.ifnum = QUIRK_ANY_INTERFACE,
.type = QUIRK_COMPOSITE,
.data = (const struct snd_usb_audio_quirk[]) {
{
.ifnum = 0,
.type = QUIRK_AUDIO_FIXED_ENDPOINT,
.data = & (const struct audioformat) {
.format = SNDRV_PCM_FORMAT_S24_3LE,
.channels = 2,
.iface = 0,
.altsetting = 1,
.altset_idx = 1,
.attributes = 0,
.endpoint = 0x01,
.ep_attr = 0x01,
.rates = SNDRV_PCM_RATE_CONTINUOUS,
.rate_min = 44100,
.rate_max = 44100,
}
},
{
.ifnum = 1,
.type = QUIRK_AUDIO_FIXED_ENDPOINT,
.data = & (const struct audioformat) {
.format = SNDRV_PCM_FORMAT_S24_3LE,
.channels = 2,
.iface = 1,
.altsetting = 1,
.altset_idx = 1,
.attributes = 0,
.endpoint = 0x81,
.ep_attr = 0x01,
.rates = SNDRV_PCM_RATE_CONTINUOUS,
.rate_min = 44100,
.rate_max = 44100,
}
},
{
.ifnum = 2,
.type = QUIRK_MIDI_FIXED_ENDPOINT,
.data = & (const struct snd_usb_midi_endpoint_info) {
.out_cables = 0x0007,
.in_cables = 0x0007
}
},
{
.ifnum = -1
}
} }
},
my kernel is 2.6.21.5-rt17, (plus preempt patch) and i use debian testing the hardware seem to be very similar to Roland SC-D70 (windows .inf file are very similar)
this is the device id
Bus 001 Device 003: ID 0582:00ad Roland Corp.
in attach you can see the lsusb (verbose) output
becks@vaix:~$ amidi -l Dir Device Name IO hw:1,0,0 SH-201 MIDI 1 IO hw:1,0,1 SH-201 MIDI 2 IO hw:1,0,2 SH-201 MIDI 3
muse works fine with jack and midi output
becks@vaix:~$ aseqdump -p 20:0 Waiting for data. Press Ctrl+C to end. Source_ Event_________________ Ch _Data__ 20:0 Note on 1 52 17 20:0 Note off 1 52 55
also midi-in works
becks@vaix:~$ cat /proc/asound/cards
0 [A5451 ]: ALI5451 - ALI 5451
ALI 5451 at 0x8400, irq 9
1 [SH201 ]: USB-Audio - SH-201
Roland SH-201 at usb-0000:00:0c.0-1, full speedwhen i use my synth like a sound card, it don't work, i don't know exactly why (if is a patch problem, or rate/format)
becks@vaix:~$ aplay -D hw:1,0 /usr/share/sounds/KDE_Window_UnSticky.wav Playing WAVE '/usr/share/sounds/KDE_Window_UnSticky.wav' : Signed 16 bit Little Endian, Rate 22050 Hz, Mono aplay: set_params:904: Sample format non available
let me know if you need more info
thanks
--
carlo beccaria
Bus 001 Device 003: ID 0582:00ad Roland Corp.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 255 Vendor Specific Class
bDeviceSubClass 0
bDeviceProtocol 255
bMaxPacketSize0 8
idVendor 0x0582 Roland Corp.
idProduct 0x00ad
bcdDevice 1.00
iManufacturer 1 Roland iProduct 2 SH-201 iSerial 0 bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 161
bNumInterfaces 3
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xc0
Self Powered
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 0
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 2
bInterfaceProtocol 2
iInterface 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 1
bNumEndpoints 1
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 2
bInterfaceProtocol 2
iInterface 0
Class specific interface descriptor for class 255 is unsupported Class specific interface descriptor for class 255 is unsupported Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 9
Transfer Type Isochronous
Synch Type Adaptive
Usage Type Data
wMaxPacketSize 0x0120 1x 288 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 0
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 2
bInterfaceProtocol 1
iInterface 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 1
bNumEndpoints 1
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 2
bInterfaceProtocol 1
iInterface 0
Class specific interface descriptor for class 255 is unsupported Class specific interface descriptor for class 255 is unsupported Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 5
Transfer Type Isochronous
Synch Type Asynchronous
Usage Type Data
wMaxPacketSize 0x0120 1x 288 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 2
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 3
bInterfaceProtocol 0
iInterface 0
Class specific interface descriptor for class 255 is unsupported Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0020 1x 32 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x84 EP 4 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0020 1x 32 bytes
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 2
bAlternateSetting 1
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 3
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0020 1x 32 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x84 EP 4 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0020 1x 32 bytes
bInterval 1
Device Status: 0x0000
(Bus Powered)
_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
Quoted 1 line · carlo beccaria
hi all, with this change in
usbquirks.h, i can use my synth roland sh-201
i have a new patch for this device (in attach) with this patch, also the audio works (with jackd)
let me know if you need more info
--
carlo beccaria
usbquirks-sh201.h renamed from usbquirks.h +34 -0
@@ -1042,6 +1042,40 @@ .type = QUIRK_MIDI_STANDARD_INTERFACE } }, + +{ +/* Roland SH-201 */ + USB_DEVICE(0x0582, 0x00ad), + .driver_info = (unsigned long ) & (const struct snd_usb_audio_quirk ) { + .vendor_name ="Roland" , + .product_name ="SH-201" , + .ifnum =QUIRK_ANY_INTERFACE , + .type =QUIRK_COMPOSITE , + .data = (const struct snd_usb_audio_quirk []) { + { + .ifnum =0 , + .type =QUIRK_AUDIO_STANDARD_INTERFACE + }, + { + .ifnum =1 , + .type =QUIRK_AUDIO_STANDARD_INTERFACE + }, + { + .ifnum =2 , + .type =QUIRK_MIDI_FIXED_ENDPOINT , + .data = & (const struct snd_usb_midi_endpoint_info ) { + .out_cables =0x0001 , + .in_cables =0x0001 + } + }, + { + .ifnum =-1 + } + } + } +}, + + /* TODO: add Roland EXR support */ {/* has ID 0x0067 when not in "Advanced Driver" mode */
_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
Quoted 5 lines · carlo beccaria
Quoted 1 line · carlo beccaria
hi all, with this change in
usbquirks.h, i can use my synth roland sh-201i have a new patch for this device (in attach) with this patch, also the audio works (with jackd)
Thank you.
Please provide a Signed-off-by: line.
Clemens
Quoted 9 lines · Clemens Ladisch
Quoted 5 lines · carlo beccaria
Quoted 1 line · carlo beccaria
hi all, with this change in
usbquirks.h, i can use my synth roland sh-201i have a new patch for this device (in attach) with this patch, also the audio works (with jackd)
Thank you.
Please provide a Signed-off-by: line.
Thank you
--
cb
Clemens Ladisch
AppliedQuoted 6 lines
Quoted 6 lines
Quoted 5 lines · carlo beccaria
Quoted 1 line · carlo beccaria
hi all, with this change in
usbquirks.h, i can use my synth roland sh-201i have a new patch for this device (in attach) with this patch, also the audio works (with jackd)
Applied.
Regards,
Clemens