Skip to contentSkip to conversation

roland synth sh-201

DISCUSSION Applied carlo beccaria 2 participants 5 messages Jun 28, 2007 – Jul 3, 2007

lore
Share & tools
lore
#0 lore raw

hi all, with this change in usbquirks.h , i can use my synth roland sh-201

{
/* Roland SH-201 */
USB_DEVICE(0x0582, 0x00ad),

  .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
    .vendor_name = "Roland",
    .product_name = "SH-201",
    .ifnum = QUIRK_ANY_INTERFACE,
    .type = QUIRK_COMPOSITE,
    .data = (const struct snd_usb_audio_quirk[]) {
      {
        .ifnum = 0,
        .type = QUIRK_AUDIO_FIXED_ENDPOINT,
        .data = & (const struct audioformat) {
          .format = SNDRV_PCM_FORMAT_S24_3LE,
          .channels = 2,
          .iface = 0,
          .altsetting = 1,
          .altset_idx = 1,
          .attributes = 0,
          .endpoint = 0x01,
          .ep_attr = 0x01,
          .rates = SNDRV_PCM_RATE_CONTINUOUS,
          .rate_min = 44100,
          .rate_max = 44100,
        }
      },
      {
        .ifnum = 1,
        .type = QUIRK_AUDIO_FIXED_ENDPOINT,
        .data = & (const struct audioformat) {
          .format = SNDRV_PCM_FORMAT_S24_3LE,
          .channels = 2,
          .iface = 1,
          .altsetting = 1,
          .altset_idx = 1,
          .attributes = 0,
          .endpoint = 0x81,
          .ep_attr = 0x01,
          .rates = SNDRV_PCM_RATE_CONTINUOUS,
          .rate_min = 44100,
          .rate_max = 44100,
        }
      },
      {
        .ifnum = 2,
        .type = QUIRK_MIDI_FIXED_ENDPOINT,
        .data = & (const struct snd_usb_midi_endpoint_info) {
          .out_cables = 0x0007,
          .in_cables  = 0x0007
        }
      },
      {
        .ifnum = -1
      }
    }

}
},

my kernel is 2.6.21.5-rt17, (plus preempt patch) and i use debian testing the hardware seem to be very similar to Roland SC-D70 (windows .inf file are very similar)

this is the device id
Bus 001 Device 003: ID 0582:00ad Roland Corp.

in attach you can see the lsusb (verbose) output

becks@vaix:~$ amidi -l
Dir Device    Name
IO  hw:1,0,0  SH-201 MIDI 1
IO  hw:1,0,1  SH-201 MIDI 2
IO  hw:1,0,2  SH-201 MIDI 3

muse works fine with jack and midi output

becks@vaix:~$ aseqdump -p 20:0
Waiting for data. Press Ctrl+C to end.
Source_ Event_________________ Ch _Data__
 20:0   Note on                 1  52  17
 20:0   Note off                1  52  55

also midi-in works

becks@vaix:~$ cat /proc/asound/cards
 0 [A5451          ]: ALI5451 - ALI 5451
                      ALI 5451 at 0x8400, irq 9
 1 [SH201          ]: USB-Audio - SH-201
                      Roland SH-201 at usb-0000:00:0c.0-1, full speed

when i use my synth like a sound card, it don't work, i don't know exactly why (if is a patch problem, or rate/format)

becks@vaix:~$ aplay  -D hw:1,0 /usr/share/sounds/KDE_Window_UnSticky.wav
Playing WAVE '/usr/share/sounds/KDE_Window_UnSticky.wav' : Signed 16 bit Little Endian, Rate 22050 Hz, Mono
aplay: set_params:904: Sample format non available

let me know if you need more info
thanks

--
carlo beccaria

Bus 001 Device 003: ID 0582:00ad Roland Corp.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 255 Vendor Specific Class
bDeviceSubClass 0
bDeviceProtocol 255
bMaxPacketSize0 8
idVendor 0x0582 Roland Corp.
idProduct 0x00ad
bcdDevice 1.00

  iManufacturer           1 Roland
  iProduct                2 SH-201
  iSerial                 0 
  bNumConfigurations      1

Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 161
bNumInterfaces 3
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xc0
Self Powered
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 0
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 2
bInterfaceProtocol 2
iInterface 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 1
bNumEndpoints 1
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 2
bInterfaceProtocol 2
iInterface 0
Class specific interface descriptor for class 255 is unsupported Class specific interface descriptor for class 255 is unsupported Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 9
Transfer Type Isochronous
Synch Type Adaptive
Usage Type Data
wMaxPacketSize 0x0120 1x 288 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 0
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 2
bInterfaceProtocol 1
iInterface 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 1
bNumEndpoints 1
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 2
bInterfaceProtocol 1
iInterface 0
Class specific interface descriptor for class 255 is unsupported Class specific interface descriptor for class 255 is unsupported Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 5
Transfer Type Isochronous
Synch Type Asynchronous
Usage Type Data
wMaxPacketSize 0x0120 1x 288 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 2
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 3
bInterfaceProtocol 0
iInterface 0
Class specific interface descriptor for class 255 is unsupported Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0020 1x 32 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x84 EP 4 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0020 1x 32 bytes
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 2
bAlternateSetting 1
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 3
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0020 1x 32 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x84 EP 4 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0020 1x 32 bytes
bInterval 1
Device Status: 0x0000
(Bus Powered)

_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

#1 lore raw
Quoted 1 line · carlo beccaria

hi all, with this change in usbquirks.h , i can use my synth roland sh-201

i have a new patch for this device (in attach) with this patch, also the audio works (with jackd)

let me know if you need more info

--
carlo beccaria

usbquirks-sh201.h renamed from usbquirks.h +34 -0
@@ -1042,6 +1042,40 @@
 		.type = QUIRK_MIDI_STANDARD_INTERFACE
 	}
 },
+
+{
+  /* Roland SH-201 */
+	USB_DEVICE(0x0582, 0x00ad),
+	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+		.vendor_name = "Roland",
+		.product_name = "SH-201",
+		.ifnum = QUIRK_ANY_INTERFACE,
+		.type = QUIRK_COMPOSITE,
+		.data = (const struct snd_usb_audio_quirk[]) {
+			{
+				.ifnum = 0,
+				.type = QUIRK_AUDIO_STANDARD_INTERFACE
+			},
+			{
+				.ifnum = 1,
+				.type = QUIRK_AUDIO_STANDARD_INTERFACE
+			},
+			{
+				.ifnum = 2,
+				.type = QUIRK_MIDI_FIXED_ENDPOINT,
+				.data = & (const struct snd_usb_midi_endpoint_info) {
+					.out_cables = 0x0001,
+					.in_cables  = 0x0001
+				}
+			},
+			{
+				.ifnum = -1
+			}
+		}
+	}
+},
+
+
 	/* TODO: add Roland EXR support */
 {
 	/* has ID 0x0067 when not in "Advanced Driver" mode */

_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

#2 lore raw
Quoted 5 lines · carlo beccaria
Quoted 1 line · carlo beccaria

hi all, with this change in usbquirks.h , i can use my synth roland sh-201

i have a new patch for this device (in attach) with this patch, also the audio works (with jackd)

Thank you.
Please provide a Signed-off-by: line.

Clemens

#3 lore raw
Quoted 9 lines · Clemens Ladisch
Quoted 5 lines · carlo beccaria
Quoted 1 line · carlo beccaria

hi all, with this change in usbquirks.h , i can use my synth roland sh-201

i have a new patch for this device (in attach) with this patch, also the audio works (with jackd)

Thank you.
Please provide a Signed-off-by: line.

Thank you

--
cb

#4 lore raw
Quoted 6 lines
Quoted 6 lines
Quoted 5 lines · carlo beccaria
Quoted 1 line · carlo beccaria

hi all, with this change in usbquirks.h , i can use my synth roland sh-201

i have a new patch for this device (in attach) with this patch, also the audio works (with jackd)

Applied.

Regards,
Clemens