videobuf
I'm working on building a v4l2 driver for an FPGA module on a Xilinx Virtex4 PPC.
Question:
Why does the v4l2 videobuf *depend* on PCI?
Rob.
Quoted 5 lines · Robert Woodworth
I'm working on building a v4l2 driver for an FPGA module on a Xilinx Virtex4 PPC.
Question:
Why does the v4l2 videobuf *depend* on PCI?
You could try dropping the dependency from Kconfig and see what breaks when you compile the core v4l2 stuff.
Cheers,
g.
Signature · 4 lines
Grant Likely, B.Sc., P.Eng. Secret Lab Technologies Ltd. [email protected] (403) 399-0195
That does work and nothing seams to be broken just yet.
I also removed the dependency from the vivi (virtual video) module and that modules works fine.
However, I tried to enable PCI support and that failed with undefined PCI addresses. (duh. I have no PCI on the board)
RJW.
Quoted 13 lines · Grant Likely
Quoted 5 lines · Robert Woodworth
I'm working on building a v4l2 driver for an FPGA module on a Xilinx Virtex4 PPC.
Question:
Why does the v4l2 videobuf *depend* on PCI?You could try dropping the dependency from
Kconfigand see what breaks when you compile the core v4l2 stuff.Cheers,
g.
Quoted 5 lines · Robert Woodworth
I'm working on building a v4l2 driver for an FPGA module on a Xilinx Virtex4 PPC.
Question:
Why does the v4l2 videobuf *depend* on PCI?
Historical reasons I guess. The videobuf module has been designed for PCI hardware (bttv if I'm not mistaken). Now that other, non-PCI devices would benefit from videobuf, PCI-specific support is being moved to a separate module.
Search the video4linux mailing list archive for discussions about videobuf cleanup. You can get the latest source tree at www.linuxtv.org.
Best regards,
Signature · 9 lines
Laurent Pinchart CSE Semaphore Belgium Chaussée de Bruxelles, 732A B-1410 Waterloo Belgium T +32 (2) 387 42 59 F +32 (2) 387 42 75