Skip to contentSkip to conversation

videobuf

DISCUSSION Robert Woodworth 3 participants 4 messages Oct 30, 2007

lore
Share & tools
lore
#0 lore raw

I'm working on building a v4l2 driver for an FPGA module on a Xilinx Virtex4 PPC.

Question:
Why does the v4l2 videobuf *depend* on PCI?

Rob.

#1 lore raw
Quoted 5 lines · Robert Woodworth

I'm working on building a v4l2 driver for an FPGA module on a Xilinx Virtex4 PPC.

Question:
Why does the v4l2 videobuf *depend* on PCI?

You could try dropping the dependency from Kconfig and see what breaks when you compile the core v4l2 stuff.

Cheers,
g.

Signature · 4 lines
Grant Likely, B.Sc., P.Eng.
Secret Lab Technologies Ltd.
[email protected]
(403) 399-0195
#3 lore raw
In reply to Robert Woodworth
Quoted 5 lines · Robert Woodworth

I'm working on building a v4l2 driver for an FPGA module on a Xilinx Virtex4 PPC.

Question:
Why does the v4l2 videobuf *depend* on PCI?

Historical reasons I guess. The videobuf module has been designed for PCI hardware (bttv if I'm not mistaken). Now that other, non-PCI devices would benefit from videobuf, PCI-specific support is being moved to a separate module.

Search the video4linux mailing list archive for discussions about videobuf cleanup. You can get the latest source tree at www.linuxtv.org.

Best regards,

Signature · 9 lines
Laurent Pinchart
CSE Semaphore Belgium

Chaussée de Bruxelles, 732A
B-1410 Waterloo
Belgium

T +32 (2) 387 42 59
F +32 (2) 387 42 75
#2 lore raw
In reply to Grant Likely

That does work and nothing seams to be broken just yet.
I also removed the dependency from the vivi (virtual video) module and that modules works fine.

However, I tried to enable PCI support and that failed with undefined PCI addresses. (duh. I have no PCI on the board)

RJW.

Quoted 13 lines · Grant Likely
Quoted 5 lines · Robert Woodworth

I'm working on building a v4l2 driver for an FPGA module on a Xilinx Virtex4 PPC.

Question:
Why does the v4l2 videobuf *depend* on PCI?

You could try dropping the dependency from Kconfig and see what breaks when you compile the core v4l2 stuff.

Cheers,
g.