Skip to contentSkip to conversation

regulator: regulator framework build.

PATCH In review Liam Girdwood 2 participants 2 messages Feb 20, 2008 Voltage and current regulator framework

lore
Share & tools
lore
#0 lore raw

PATCH 5/6 regulator: regulator framework build.

This patch adds support to build the regulator core.

---
 drivers/Kconfig            |    2 ++
 drivers/Makefile           |    1 +
 drivers/regulator/Kconfig  |   32 ++++++++++++++++++++++++++++++++
 drivers/regulator/Makefile |    9 +++++++++
 4 files changed, 44 insertions(+), 0 deletions(-)
 create mode 100644 drivers/regulator/Kconfig
 create mode 100644 drivers/regulator/Makefile
drivers/Kconfig +2 -0
index 3a0e354..cc5946c 100644
@@ -62,6 +62,8 @@ source "drivers/hwmon/Kconfig"
 
 source "drivers/thermal/Kconfig"
 
+source "drivers/regulator/Kconfig"
+
 source "drivers/watchdog/Kconfig"
 
 source "drivers/ssb/Kconfig"
drivers/Makefile +1 -0
index e5e394a..3d0264e 100644
@@ -66,6 +66,7 @@ obj-$(CONFIG_W1)		+= w1/
 obj-$(CONFIG_POWER_SUPPLY)	+= power/
 obj-$(CONFIG_HWMON)		+= hwmon/
 obj-$(CONFIG_THERMAL)		+= thermal/
+obj-$(CONFIG_REGULATOR)		+= regulator/
 obj-$(CONFIG_WATCHDOG)		+= watchdog/
 obj-$(CONFIG_PHONE)		+= telephony/
 obj-$(CONFIG_MD)		+= md/
drivers/regulator/Kconfig new file +32 -0
new file mode 100644
index 0000000..51b8d06
@@ -0,0 +1,32 @@
+menu "Voltage and Current regulators"
+
+config REGULATOR
+	bool "Voltage and Current Regulator Support"
+	default n
+	help
+	  Generic Voltage and Current Regulator support.
+
+	  This framework is designed to provide a generic interface to voltage
+	  and current regulators within the Linux kernel. It's intended to
+	  provide voltage and current control to client or consumer drivers and
+	  also provide status information to user space applications through a
+	  sysfs interface.
+
+	  The intention is to allow systems to dynamically control regulator
+	  output in order to save power and prolong battery life. This applies
+	  to both voltage regulators (where voltage output is controllable) and
+	  current sinks (where current output is controllable).
+
+	  This framework safely compiles out if not selected so that client
+	  drivers can still be used in systems with no software controllable
+	  regulators.
+
+	  If unsure, say no.
+
+config REGULATOR_DEBUG
+	bool "Regulator debug support"
+	depends on REGULATOR
+	help
+	  Say yes here to enable debugging support.
+
+endmenu
drivers/regulator/Makefile new file +9 -0
new file mode 100644
index 0000000..3f70871
@@ -0,0 +1,9 @@
+#
+# Makefile for regulator drivers.
+#
+
+obj-$(CONFIG_REGULATOR) += reg-core.o
+
+ifeq ($(CONFIG_REGULATOR_DEBUG),y)
+	EXTRA_CFLAGS		+= -DDEBUG
+endif
Signature · 1 line
1.5.4.2
#1 lore raw

drivers/regulator/Makefile line 6

Quoted 12 lines
drivers/regulator/Makefile new file +6 -0
new file mode 100644
index 0000000..3f70871
@@ -0,0 +1,9 @@
+#
+# Makefile for regulator drivers.
+#
+
+obj-$(CONFIG_REGULATOR) += reg-core.o
+

Replace this

drivers/regulator/Makefile line 9

Quoted 3 lines
drivers/regulator/Makefile new file +3 -0
+ifeq ($(CONFIG_REGULATOR_DEBUG),y)
+	EXTRA_CFLAGS		+= -DDEBUG
+endif

with this:

Quoted 1 line

+ccflags-$(CONFIG_REGULATOR_DEBUG) += -DDEBUG

Sam