BUG: scheduling while atomic (2.6.26-rc3...)
Hi,
I'm seeing this bug when I boot but unfortunately the messages don't seem to get logged and the system locks so I took a photo of as much as could fit on my laptop's screen:
http://sucs.org/~welshbyte/wirelesstraces.jpg (sorry about the bad quality).
Anyway, I've bisected it down to commit 2f561feb386d6adefbad63c59a1fcd298ac6a79c "mac80211: Add RTNL version of ieee80211_iterate_active_interfaces"
lspci says I'm using a:
02:00.0 Network controller: RaLink RT2500 802.11g Cardbus/mini-PCI (rev 01)
Subsystem: Belkin Device 701a
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at 54000000 (32-bit, non-prefetchable) [size=8K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: rt2500pci
Let me know if you require any more information (or a clearer photo/transcription).
--
Andy Price
Johannes Berg
maintainerQuoted 7 lines · Andrew Price
Hi,
I'm seeing this bug when I boot but unfortunately the messages don't seem to get logged and the system locks so I took a photo of as much as could fit on my laptop's screen:
http://sucs.org/~welshbyte/wirelesstraces.jpg (sorry about the bad quality).
Quoted 7 lines
Anyway, I've bisected it down to commit
2f561feb386d6adefbad63c59a1fcd298ac6a79c"mac80211: Add RTNL version ofieee80211_iterate_active_interfaces"lspci says I'm using a:
02:00.0 Network controller: RaLink RT2500 802.11g Cardbus/mini-PCI (rev 01)
Looks like rt2x00 actually needs both versions of the function.
johannes
Quoted 12 lines · Johannes Berg
Quoted 11 lines · Andrew Price
Hi,
I'm seeing this bug when I boot but unfortunately the messages don't seem to get logged and the system locks so I took a photo of as much as could fit on my laptop's screen:
http://sucs.org/~welshbyte/wirelesstraces.jpg (sorry about the bad quality).Anyway, I've bisected it down to commit
2f561feb386d6adefbad63c59a1fcd298ac6a79c"mac80211: Add RTNL version ofieee80211_iterate_active_interfaces"
Quoted 5 lines
Quoted 3 lines
lspci says I'm using a:
02:00.0 Network controller: RaLink RT2500 802.11g Cardbus/mini-PCI (rev 01)
Looks like rt2x00 actually needs both versions of the function.
Johannes: Thanks for the tip, I seriously overlooked that the rtnl version grabs a mutex in interrupt context. :)
Andew: Could you try below patch to see if that works?
---
drivers/net/wireless/rt2x00/rt2x00dev.c +3 -3
@@ -481,9 +481,9 @@ void rt2x00lib_beacondone(struct rt2x00_dev *rt2x00dev)if (!test_bit (DEVICE_ENABLED_RADIO , &rt2x00dev->flags))return ; -ieee80211_iterate_active_interfaces (rt2x00dev->hw, - rt2x00lib_beacondone_iter, - rt2x00dev); +ieee80211_iterate_active_interfaces_atomic (rt2x00dev->hw, + rt2x00lib_beacondone_iter, + rt2x00dev);queue_work (rt2x00dev->hw->workqueue, &rt2x00dev->intf_work); }
Hi Ivo,
Quoted 1 line · Ivo van Doorn
Andew: Could you try below patch to see if that works?
It looks good. wlan0 came up fine and dmesg looks clean, I can ping and read email...
Seems that some traffic (ssh, http, ...) is having problems though so I'm back on -rc1 to email you but I expect that's a different problem altogether and I'll see if I can track it down.
Quoted 9 lines
---
drivers/net/wireless/rt2x00/rt2x00dev.c +0
-0@@ -481,9 +481,9 @@ void rt2x00lib_beacondone(struct rt2x00_dev *rt2x00dev)if (!test_bit (DEVICE_ENABLED_RADIO , &rt2x00dev->flags))return ;
drivers/net/wireless/rt2x00/rt2x00dev.c void rt2x00lib_beacondone(struct rt2x00_dev *rt2x00dev) · line 489
Quoted 10 lines
drivers/net/wireless/rt2x00/rt2x00dev.c +3
-3-ieee80211_iterate_active_interfaces (rt2x00dev->hw, - rt2x00lib_beacondone_iter, - rt2x00dev); +ieee80211_iterate_active_interfaces_atomic (rt2x00dev->hw, + rt2x00lib_beacondone_iter, + rt2x00dev);queue_work (rt2x00dev->hw->workqueue, &rt2x00dev->intf_work); }
Thanks,
--
Andy Price
Quoted 7 lines · Andrew Price
Hi Ivo,
Quoted 1 line · Ivo van Doorn
Andew: Could you try below patch to see if that works?
It looks good. wlan0 came up fine and dmesg looks clean, I can ping and read email...
Excellent, I'll push the patch upstream then. :)
Ivo
Quoted 34 lines
Seems that some traffic (ssh, http, ...) is having problems though so I'm back on -rc1 to email you but I expect that's a different problem altogether and I'll see if I can track it down.
Quoted 9 lines
---
drivers/net/wireless/rt2x00/rt2x00dev.c +0
-0@@ -481,9 +481,9 @@ void rt2x00lib_beacondone(struct rt2x00_dev *rt2x00dev)if (!test_bit (DEVICE_ENABLED_RADIO , &rt2x00dev->flags))return ;drivers/net/wireless/rt2x00/rt2x00dev.c void rt2x00lib_beacondone(struct rt2x00_dev *rt2x00dev) · line 489
Quoted 10 lines
drivers/net/wireless/rt2x00/rt2x00dev.c +3
-3-ieee80211_iterate_active_interfaces (rt2x00dev->hw, - rt2x00lib_beacondone_iter, - rt2x00dev); +ieee80211_iterate_active_interfaces_atomic (rt2x00dev->hw, + rt2x00lib_beacondone_iter, + rt2x00dev);queue_work (rt2x00dev->hw->workqueue, &rt2x00dev->intf_work); }Thanks,
--
Andy Price--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html